Micro – and Subminiature Connectors

Partially waterproof, partially shielded

·         Connector with minimal measurements,

Æ 8 mm (0,315 inches), Snap-in-locking, Protection rating IP40,

current 3 A, voltage 60 V, available number of poles: 3, 4 and 5

·         Connector with minimal measurements,

Æ 11,5 mm (0,453 inches), Snap-in-locking, Protection rating IP67,

current 3 A / 1 A, voltage 125 V, available number of poles: 3, 4, 5 and 8

·         Connector

Æ 12 mm (0,472 inches), Bayonet-locking, Protection rating IP40,

available number of poles: 2, 3, 4, 5, 7 and 8

·         Connector

Æ 14,5 mm (0,571 inches), Push-pull-locking, Protection rating IP67 / IP40,

shielded, available number of poles: 3, 4, 5, 7 and 8

·         Connector

Æ 11,5 mm (0,453 inches), M9 x 0,5 threaded locking, Protection rating IP67 / IP40,

available number of poles: 2, 3, 4, 5, 7 and 8

Miniature Connectors

Partially waterproof, partially shielded

·         Connector with Bayonet-locking, Protection rating IP40

·         Connector with Snap-in-locking, Protection rating IP67

·         Connector with Push-pull-locking, Protection rating IP67 / IP40

·         Connector with  threaded locking, Protection rating IP67 / IP40,

shielded, plug and receptacle also available in angled versions,

flange – connectors are available with dip-solder contacts,

available number of poles: 2 – 24

Machine Connectors

Rugged, partially waterproof

• Connectors with full-plastic housings,

Threaded locking, Protection rating IP67,

Versions with VDE -, SEV -, UL – approval.

Number of poles: 3+PC, 4+PC, 6+PC, 12+PC, 24

(PC = protective conductor)

• Connectors with full-metal housings,

Threaded locking M23, Protection rating IP67,

plug and receptacle also available in angled versions,

shielded, Number of poles: 6, 9, 12, 16 and 19

Sensor  Connectors

According to common standards

• Size M5 x 0,5, Protection rating IP67, number of poles: 3 and 4
• Size M8 x 1, Protection rating IP67, number of poles: 3 and 4

termination: solder or screw, shielded, transparent versions,

versions with Snap-in locking, versions for assembly as well as

assembled cords

• Size M12 x 1, A – coded, Protection rating IP67 / IP68,

number of poles: 3, 4, 5, 12, stainless steel versions,

Termination: screw or cage clamp, shielded through shielding ring or iris spring,

transparent versions, angled versions, versions for assembly as well as

Assembled cords

• Size M12 x 1, B – coded, Protection rating IP67 / IP68,

number of poles: 3, 4, 5,  stainless steel versions,

termination: screw or cage clamp, shielded through shielding ring or iris spring,

transparent versions, angled versions, versions for assembly as well as

assembled cords

• Size M12 x 1, D – coded, Protection rating IP67, 4 poles
• Size M18 x 1, Protection rating IP67, 4 poles
• Size 7/8’’, Protection rating IP67

Number of poles: 2+PC, 3+PC, 4+PC also 3, 4, 5

(PC = protective conductor)

Magnetic valve plugs

according to the common size

·         Model A

Protection class IP65 / IP67, nach DIN EN 175301-803

Number of poles: 2+PE or 3+PE, low / high – versions.

Transparent versions.  Versions protected against surge

·         Model B

Protection class IP65 / IP67, nach DIN EN 175301-803

number of poles: 2+PE, for own assembly or with molded cable.

Transparent versions.  Versions protected against surge

·         Model C

Protection class IP65 / IP67, nach DIN EN 175301-803

Number of poles: 2+PE or 3+PE.

• Contact banks
• Connectors for printed circuits