News

PTR Hartmann - HCB 6000/G High-Current Spring Contact

Wed, 03 Jun 26 16:23:10 +0200

The HCB 6000/G is a modular high-current contact designed for applications with the most demanding performance requirements. It combines very high current-carrying capacity with a flexible and service-friendly design and is particularly well-suited for systems where availability and adaptability are critical.Key features:Modular design with replaceable head instead of complete pin replacementContinuous current up to 700 A; even higher with active air coolingReduced downtime thanks to easy maintenance and quick adjustmentWide temperature range from −40 °C to +250 °CCombination of maximum performance and high flexibilityOptional integrated temperature sensor for monitoringOptional sense contact for precise current and status measurementOptional active air cooling for additional power reservesModular Design for Project-Ready WorkflowsThe HCB 6000/G’s modular design allows individual head variants to be swapped out without having to replace the entire contact. This reduces downtime, simplifies maintenance, and enables flexible adaptation to project-specific requirements throughout the entire lifecycle.Applications:E-mobilityBattery cells and battery systemsRenewable energyPower electronicsThe high-current contact is therefore ideal for demanding applications where high currents, thermal resistance, and reliable performance are critical.If you have any further questions or would like to request samples, our office and/or field representatives will be happy to assist you and provide you with a personalized quote.Contact the sales force

Trelleborg EMC shielding combined with high IP protection

Mon, 18 May 26 12:23:31 +0200

The EMC products from Trelleborg Cable Entry Solutions are specially designed cable entry plates and cable glands that shield against electromagnetic interference while providing reliable protection against dust, water, and environmental influences (IP65 and IP67).With their EMC solutions, Trelleborg offers effective protection against electromagnetic interference. This is made possible by a particularly low specific resistance as well as a shielding effect that is superior to that of conventional thermoplastic elastomers and common elastomer materials:Material: thermoplastic elastomerSurface resistivity (IEC 60093): 10⁻¹⁰ ΩVolume resistivity (IEC 60093): 10⁻¹⁰ Ω·cmShielding effectiveness (ASTM D4935)- 1.5 GHz – 13 dB- 1 GHz – 6 dB- 500 MHz – 5 dBColor: blackOperating temperature of the material (unloaded): -40 °C...+100 °CThe following series are now available as EMC products:Cable entry plates:MC3 EMC (IP65)MC25 EMC (IP65)MC35 EMC (IP65)Round cable entry grommets:T-VET (IP67)T-GET (IP67)The advantages at a glance:Reliable EMC shielding directly at the cable entryHigh IP protection (IP65 / IP67) according to EN 60529Shielding and sealing in a single componentTime savings in installation and designRoHS compliantSuitable for indoor and outdoor applicationsIf you have any further questions about the product, our office and field staff will be happy to assist you and provide you with a personalized quote.Contact the sales force

EMC Filters for Mechanical Engineering and Heat Pumps

Mon, 27 Apr 26 11:43:14 +0200

EMC Filters for Machinery & Heat Pumps – Schaffner TE TE Connectivity is expanding the Schaffner portfolio with a new series of filters for the mechanical engineering and HVAC markets. The series includes two 3-phase-plus-neutral-conductor families with different power ratings.The FN3297 is the standard version and is suitable for general applications in machinery. The FN3298 is used for demanding applications, such as long cable runs or multiple axes under strict EMC requirements. Both filters feature a certified SCCR rating of 100 kA and modern push-in terminals in a space-saving front-mount design.Technical HighlightsCompact design (book-style) reduces space requirements in the control cabinetTwo performance levels to meet different requirementsModern push-in terminals for simple and reliable wiringTypical ApplicationsMechanical Engineering Air Conditioning and Heat Pump Solutions (HVAC)If you have any further questions about the product, our office and field staff will be happy to assist you and provide you with a personalized quote.Contact the sales force

Flexible M8 solutions with solder terminals

Wed, 22 Apr 26 00:00:00 +0200

Binder Expands Its M8 Portfolio: New M8 Flange Connectors with Solder TerminalsWith the new M8 flange connectors with solder terminals, binder is expanding its existing M8 portfolio to include a practical solution for custom and manual connection concepts. The compact design and robust construction make these connectors particularly suitable for applications requiring customer-specific cable lengths, small-batch production, or custom designs.Flexible connection solution for custom applicationsUntil now, binder has offered M8 flange connectors with various connection types, including dip-solder, stranded wire, and cable versions. The new version with a solder cup expands design flexibility during wiring and enables easy manual assembly.Especially in automation and robotics, where compact designs, flexible signal routing, and adaptability are crucial, the new M8 flange connectors offer a cost-effective and versatile solution.Ideal for tight installation spaces and custom solutionsThe M8 flange connectors with solder terminals are particularly suitable for:Automation and conveyor technology Sensor/actuator cablingIdeal for tight installation spaces and custom solutionsAutomation and conveyor technology Despite their compact dimensions, they ensure reliable signal transmission even under demanding conditions.Tested Quality for Industrial ApplicationsLike all binder connectors, the new M8 variants undergo extensive mechanical and electrical testing. The flange parts with solder cups meet high standards for durability, reliability, and service life, and are designed for use in industrial environments.Rugged and durable: M8 connectors for harsh industrial environmentsBinder’s M8 flange connectors are designed for continuous use under harsh conditions. With protection ratings up to IP69K, they are resistant to dust, moisture, vibrations, and cleaning processes. A variety of flange plug and flange socket variants allow for flexible adaptation to different installation situations.Conclusion: Greater flexibility in a compact designWith the new M8 flange connectors featuring solder terminals, binder offers a functional expansion of its portfolio for customized wiring concepts. The combination of compact design, manual assembly capability, and industrial ruggedness makes them an ideal solution for modern automation, robotics, and sensor technology applications.Technical Specifications (Excerpt)Standard: IEC 61076-2-104Design: Compact, industrial-grade M8 flange connectorsConnection type: Solder connection (solder cup)Compatibility: M8 sensor and actuator connectionsProtection ratings: IP65, IP67, IP69KVariants: Various flange plugs and flange sockets

CONEC: 100% lead-free products

Wed, 15 Apr 26 00:00:00 +0200

At CONEC, the entire product range will be converted to lead-free materials by December 31, 2026; in other words, production will be 100% lead-free starting January 1, 2027.All components have been carefully inspected—from raw materials through to the final production step.The result: reliable, robust, and sustainable fastening technology—without compromising on quality.For you, this means: Early, compliant, and risk-free useMaximum product safety and long-term availabilityIf you have any further questions, please feel free to contact your representative in the office or in the field.Contact the sales force

HPC 350A BESS CONNECTOR

Mon, 30 Mar 26 00:00:00 +0200

HPC 350A BESS Connector for Safe High-Current ApplicationsWith the HPC 350A BESS Connector, TE Connectivity is expanding its portfolio for Battery Energy Storage Systems (BESS) with a high-performance and reliable connection solution. The single-pole high-current connector is rated for 1500 V and 350 A and addresses the growing demands for safety and efficiency in energy storage applications.Focus on Reliability and SafetyThe HPC 350A offers excellent control over temperature rise. Optional integrated temperature sensors enable 24/7 monitoring of the system and support intelligent safety management. The IP67 protection rating also ensures reliable outdoor use.Flexible installation and easy handlingThe well-thought-out design with 180° inline locking allows for 360° rotation and ensures quick and easy installation, even for large quantities on-site. The Quick-Lock system with push-to-release function significantly simplifies maintenance and disassembly in the field. Different coding and color options (orange, black) prevent incorrect connections and increase operational safety.Technical Specifications at a GlanceRated voltage: 1500 VRated current: 350 AProtection rating: IP67Materials: PA66, copperStandards: UL 4128, IEC 61984, TÜV PPP 51090B:2023Typical ApplicationsThe HPC 350A connector was specifically designed for BESS applications and is ideal for modern energy storage systems with high power requirements.Further InformationAdditional details, data sheets, and product resources are available on the internal pages:HPC 350 A BESS connector English flyerHPC 350 A BESS connector part listIf you have any further questions about the product, our office and field staff will be happy to assist you and provide you with a personalized quote.Contact the sales force

Battery terminal connectors for home storage systems

Wed, 11 Mar 26 00:00:00 +0100

The new battery terminal connectors have been specially developed for use in home storage systems. They enable a secure, reverse polarity-protected connection to battery systems and support simple and error-free installation thanks to mechanical coding and color coding.Key featuresReverse polarity protected DC connectors for battery connectionsMechanical coding to prevent incorrect connectionsColored markings for clear assignment of connectionsTouch-protected battery terminals for increased safetyHigh protection ratings for use in demanding environments (IP66 / IP68)Conductor cross-sections from 6 mm² to 16 mm²Suitable for currents up to 60 A and voltages up to 1,500 V DCReliable solution for home storageThe robust design and high electrical performance make battery pole connectors a reliable solution for modern home storage applications. They contribute to the safe, durable, and standard-compliant design of battery systems and, thanks to their silver-plated contacts, support stable operation throughout their entire service life.If you have any further questions or would like to receive samples, your contact persons from the office and/or field service will be happy to assist you and prepare a personalized quote for you.Contact sales team

Hybrid connectors for energy storage devices

Wed, 25 Feb 26 00:00:00 +0100

The new hybrid connector for energy storage combines power and signal transmission in a compact interface. As an all-in-one solution, it was specially developed for use in electrical energy storage systems and enables a safe, efficient, and space-saving connection solution.Key featuresCombination of power and signal transmission in a compact connectorReduction in the number of interfaces for a clearer overview of the systemSpace-saving design for compact energy storage solutionsPre-assembled design for fast and error-free installationRobust construction for reliable operation under demanding conditionsHigh protection classes for use in industrial environments (IP65 / IP67)Modular system for adaptation to different current and voltage requirementsEfficient installation and high reliabilityThe pre-assembled design enables quick and error-free installation. Installation times are reduced, while potential sources of error are significantly reduced. The robust construction ensures a stable connection even under demanding environmental conditions and supports reliable operation throughout the entire service life.Flexibility for different applicationsThanks to the modular system, the hybrid connector can be flexibly adapted to different current, voltage, and cable requirements. Manufacturing and assembly tolerances can be reliably compensated for. The connector thus supports the economical, future-proof design of modern energy storage systems in a wide range of applications.If you have any further questions or would like to receive samples, your contact persons from the office and/or field service will be happy to assist you and prepare a personalized quote for you.Contact sales team

VOLINSU EVFX heat shrink tubing from TE Connectivity

Wed, 18 Feb 26 00:00:00 +0100

Börsig GmbH presents the VOLINSU EVFX heat-shrink tubing from TE Connectivity in the high-voltage cable protection sector – a powerful, efficient, and particularly robust solution for use in electric and hybrid vehicles.The EVFX tubing has been specially developed to securely attach corrugated pipes to high-voltage cables and reliably replace conventional insulating tape. The halogen-free, mechanically highly resilient material ensures a long service life even in demanding areas of application. Technical propertiesMaterial: Thermally stabilized, modified polyolefin, cross-linked by irradiation.Shrink ratio: 3:1 – enables optimal adaptation to different cable and corrugated pipe sizes Temperatures: -→ Minimum shrink temperature: 90°C-→ Complete shrinkage at: 150°C-→ Continuous operating temperature: –40°C to +125°CFlame retardant: Prevents the spread of fireColor: Orange according to RAL2003, as a clear identifier for high-voltage applications Application benefitsEVFX heat-shrink tubing offers significant process and quality advantages over adhesive tape-based solutions:Extremely resilient to mechanical stress – provides reliable protection against abrasion, friction, and wearEasy to install – can be fitted using a hot air gun/hair dryer or convection oven; low shrink temperature prevents the cable from overheatingSaves time and money – shrinking processes are significantly faster than wrapping with adhesive/insulating tape and noticeably reduce installation costsMoisture and aging resistant – more durable than adhesive tape solutions and insensitive to demanding environmental conditions Typical areas of applicationElectric and hybrid vehiclesCommercial and industrial transportMechanical corrugated pipe fasteningsBattery modules, BDU, HV cable harnessesVOLINSU EVFX heat-shrink tubing is the ideal solution for users who require maximum mechanical safety, efficient assembly processes, and reliable high-voltage labeling.If you have any further questions about the product, your sales representatives and customer service team will be happy to assist you and provide you with a personalized quote.Contact sales team

Flat cables and connectors for efficient solutions

Wed, 11 Feb 26 00:00:00 +0100

FFC/FPC (flexible printed circuit) connectors and flat cables from binder mpe - Compact, reliable, and efficient connection solutions for modern electronicsbinder mpe now offers a wide range of FFC (flat flexible cable)/FPC (flexible printed circuit) connectors and matching flat cables for demanding electronic applications. The solutions are ideal for industrial, medical technology, automotive, and consumer electronics applications and impress with their flexibility, precision, and easy integration into existing systems.FFC and FPC flat cables for versatile applicationsThese high-quality flat cables enable the connection of printed circuit boards to each other or to external components. They can be individually configured and combined without tools, making them ideal for projects with varying requirements.Your advantages at a glance• Grid dimensions from 0.30 mm – ideal for the finest signal processing and compact designs• ZIF (Zero Insertion Force) & LIF (Low Insertion Force) variants – easy operation, secure and stable connection• SMD (Surface Mounted Device) compatibility – perfectly suited for fully automated assembly processes• Active locking systems – reliably prevent unintentional disconnection• Custom FFC cables – freely selectable length, number of pins, contact surfaces, and tape• Multiple flexibility classes – standard, flexible, super flexible• UL certification – suitable for temperature ranges up to 105 °C and voltages up to 300 V• Optional shielding variants – aluminum, copper, or conductive fabric• Customized special solutions – quick and easy to implement without toolsAll products are available now and offer a reliable, secure connection in a wide range of applications.For further questions about the products, your contacts in inside and field sales will be happy to assist you and prepare a personalized quotation.Contact sales team

RADOX® 185 mm² – new shielded EV high-voltage cable

Wed, 04 Feb 26 00:00:00 +0100

With the RADOX® 185 mm² FLEX high-voltage cable, HUBER+SUHNER expands its portfolio of shielded high-voltage solutions for electrically driven heavy-duty vehicles. The new cable was specifically developed for EV applications where high electrical power, mechanical loads, and extreme environmental conditions converge. It supports OEMs in ensuring the reliability of modern electric vehicles even under demanding operating conditions.Key featuresHigh shielding current-carrying capacity, tested and validatedLarge conductor cross-section of 185 mm² for high power requirementsUp to 30% lower bending force compared to standard cablesHigh abrasion and crush resistance for use in harsh conditionsFlexible over a temperature range from –40 to +150 °CResistant to chemical and environmental influences Proven quality for demanding applicationsThe design of the RADOX® 185 mm² FLEX high-voltage cable is engineered for continuous operation at high AC currents and elevated frequencies. Electrical and mechanical performance is maintained even under intensive stress.Heavy-duty applicationsTypical areas of use include electrically powered vehicles in mining, agriculture, and maritime environments. These include, among others, transport vehicles, loaders, underground vehicles, tractors, as well as other electric heavy-duty and special machines.For further questions about the products, your contacts in inside and field sales will be happy to assist you and prepare a personalized quotation.Contact sales team

High-Current Capacity for Low-Voltage Applications

Thu, 29 Jan 26 00:00:00 +0100

HALVONEX connectors from TE Connectivity are optimized for high-current applications in low-voltage systems. They combine high current-carrying capacity with a compact design and enable reliable power transmission even under demanding conditions. The product series is designed for durability and provides a robust solution for modern electrical systems in industrial and vehicle applications.Key FeaturesHigh Current Capacity: Designed for power-intensive applications with reliable energy transmission.Optimized for Low-Voltage Applications: Ideal for modern low-voltage systems with high power requirements.Compact Design: High power density in a space-saving design, allowing maximum design flexibility.High Reliability: Robust construction for consistent performance and reduced maintenance effort.Mechanical Stability and Vibration Resistance: Suitable for mobile and industrial applications under demanding conditions.Reliable Sealing: Protection against dust, moisture, and dirt for use in harsh environments.Product Lines & Technical DataHALVONEX MaxVoltage: 60 V (up to 100 V after verification and approval)Current: up to 400 AConductor cross-section: up to 95 mm²Operating temperature: −40 °C to +120 °CProtection ratings: IP67 and IP69KMaterial: UL 94 V-0 HALVONEX ProVoltage: 28 V DCCurrent: 78 AConductor cross-section: 10 mm²Operating temperature: −30 °C to +100 °CProtection ratings: IP67 and IP69K (with end housings)Fields of ApplicationCommercial vehicles such as trucks and busesAgricultural machinery and construction equipmentConveyor systems and forkliftsBattery systems and DC convertersElectric fans, HVAC, and cooling systemsPower distribution and junction boxesApplications in autonomous driving and electric auxiliary systemsFor further questions about the products, your contacts from our sales teams will be happy to assist you and prepare your personalized offer.Contact sales team

Bleifrei umstellen – Zukunft jetzt sichern

Wed, 21 Jan 26 00:00:00 +0100

Die Börsig GmbH unterstützt Sie als zuverlässiger Distributor bei der Umstellung auf bleifreie Produkte. Mit den Produkten von Phoenix Contact setzen Sie auf Innovation, Nachhaltigkeit und gesetzliche Konformität.Phoenix Contact hat sein Portfolio bei vielen Artikeln bereits vor Monaten umgestellt. Diese Steckverbinder sind somit bleifrei verfügbar und erfüllen die strengen RoHS-Grenzwerte. Damit sind Sie bestens vorbereitet auf die kommenden regulatorischen Anforderungen.Warum jetzt handeln?Die bisher gültigen Ausnahmen für den Einsatz von Blei in Elektro- und Elektronikgeräten laufen aus. Betroffen sind unter anderem Legierungen, Lote und keramische Materialien. Nach Ablauf der Übergangsfristen dürfen nur noch bleifreie Alternativen eingesetzt werden. Wer frühzeitig umstellt, vermeidet Engpässe, sichert die Einhaltung gesetzlicher Vorgaben und stärkt seine Position am Markt.Ihre Vorteile mit Börsig und Phoenix Contact:Zukunftssicherheit: Produkte, die den kommenden Anforderungen entsprechenSchnelle Verfügbarkeit: Bleifreie Steckverbinder sofort lieferbarTechnische Beratung: Wir begleiten Ihre Umstellung Schritt für SchrittCompliance-Service: Sicherheit bei allen regulatorischen VorgabenNachhaltigkeit: Beitrag zu Umwelt- und GesundheitsschutzUnsere Empfehlung:Prüfen Sie Ihre aktuellen Komponenten und planen Sie die Umstellung jetzt. Wir bieten Ihnen die passenden Produkte und die Expertise, um Ihre Prozesse nachhaltig und rechtskonform zu gestalten. So bleiben Sie wettbewerbsfähig und vermeiden Risiken.Kontaktieren Sie uns – gemeinsam gestalten wir Ihre bleifreie Zukunft!Für weitere Fragen oder eine Bemusterung stehen Ihnen Ihre Ansprechpartner aus dem Innen- und/oder Außendienst gerne zur Verfügung und erstellen Ihnen Ihr persönliches Angebot.Kontakt zum InnendienstKontakt zum AußendienstDefinition bleifrei:Die Bezeichnung bleifrei bezieht sich auf den zukünftigen Grenzwert von 0,1 Prozent in der RoHS-Richtlinie (Restriction of Hazardous Substances) des Europäischen Parlaments.

Fast, tool-free, secure D-Sub connections

Thu, 15 Jan 26 00:00:00 +0100

D-Sub quick-locking systems enable fast, tool-free, and secure connection. They simplify installation and facilitate handling in daily use, even in hard-to-see areas. An integrated spring clip in the cover locks into place with a bolt on the mating connector, preventing accidental disconnection. To release, the release mechanism is activated and the housing is pulled back, causing the springs to open. Existing D-Sub connector systems can be retrofitted with bolts. As a partner to renowned manufacturers of D-Sub quick-locking systems, Börsig offers a wide range of products. Together, we will find the right solution for you. Here is an overview of our manufacturers:CONEC SnapLock SnapLock HoodsHousing sizes 1-5 / black or metallized plastic housingDepending on size, with one straight cable entry + one or two side cable entriesSnapLock Hood BundlesIncludes matching screw-in bolt kit9–50 pins / black or metallized plastic housingSnapLock D-SUB connectors9-50 pinsCaptive boltSnapLock retrofit sets9 or 15 pins / metallized plastic housingLengths: 1.8 m, 3 m, or 5 m (others available on request) / connecting cable (pin + socket) or connection cable (pin)SnapLock accessoriesScrew-in bolt kit for retrofitting for rear panel mounting (4-40 UNC)Locking kit for hood to hoodCONEC SnapLock connectorsHARTING D-Sub PushPullSnapLock HousingsHousing sizes 1-5 / black or metallized plastic housingDepending on size, with one straight cable entry + one or two side cable entriesHARTING D-Sub PushPullHARTING D-Sub PushPull enclosuresVarious designs:Plastic enclosure, enclosure material PC GF 20Metallized enclosure, nickel-plated ABSSizes:09-pin (size 1)15-pin (size 2)25-pin (size 3)- Internal cable clamp 3 mm - 7.5 mm- External cable clamp 5 mm - 12 mm- Coding system (second slot for fixing the coding frame)- 2 (9-pin) or 3 cable entries, up to a cable diameter of 14 mm- Cable clamp (optional) in three sizes, for cable diameters 5 - 7 mm / 7 - 10 mm / 9 - 12 mm- Wide temperature range (-35 °C to +100 °C)- PushPull can be retrofitted into existing D-Sub systems- Compatible with other manufacturershttps://www.harting.com/en-DE/d-sub-pushpull-manualhttps://www.harting.com/en-DE/d-sub-pushpullPROVERTHA QuickLockQuickLock hoods9-50 polesPlastic hoods: Long version (58.2 mm installation length) or short version (44.2 mm installation length) with PushPull quick-release fastenerFull metal hoods (44.2 mm or 42 mm installation length)2-3 cable entriesQuickLock locking pins – easy retrofitting of the PushPull quick-locking mechanism in existing D-Sub systems (e.g. with screw locking)Mounting kit for:D-Sub interface with threaded boltsD-Sub interface with thread on the connection sideD-Sub interface with through holePlastic covers 07xxB/007xxMCover-cover through housing wallCover-cover connectionFlexLock covers with QuickLock locking mechanism9, 15, or 25 pinsFlexLock: Same design - different locking types - identical external dimensionsFlexLock - PROVERTHA Connectors, Cables & Solutions GmbHIf you have any further questions about the products, your contact persons from the office and field sales teams will be happy to assist you and provide you with a personalized quote.Contact sales team

SPE M12 Hybrid: Specifications and performance

Fri, 12 Dec 25 00:00:00 +0100

With the new SPE M12 Hybrid, TE Connectivity now offers a high-performance industrial connector that combines data transmission and power supply in a single interface – perfectly tailored to modern automation and industrial environments. Key features- Combined signal and power supply: The SPE M12 Hybrid simultaneously transmits data (up to 1 Gbit/s) and power (up to 1 kW / 2 × 8 A). - Robust for industrial applications: IP67 protection and a reliable locking mechanism make the connector suitable for harsh environments and demanding conditions.- Standard-compliant & interoperable: Fully compatible with the IEC 63171-7 standard — ensuring smooth communication and easy integration into different devices and systems. - Flexible cable lengths and variants: Numerous lengths and designs (e.g., M12 to M12, pigtail, various housing materials) enable flexible adaptation to your application. Why SPE M12 Hybrid?With SPE M12 Hybrid, TE Connectivity implements key requirements for modern industrial installations: decentralization, miniaturization, and digitization. By combining data and power in a compact interface, field devices, sensors, actuators, and machines can be connected more easily and reliably—while reducing cabling costs and interface diversity.If you have any further questions about the products, your contact persons from the office and field sales teams will be happy to assist you and provide you with a personalized quote.Contact sales team

CONEC: M8x1 with integrated LED

Fri, 05 Dec 25 00:00:00 +0100

M8x1 connector with 2 or 3 integrated LEDs from CONEC – a smart solution for sensor/actuator cabling in demanding industrial applications.These connectors are designed for use in factory automation, mechanical and plant engineering, conveyor and packaging technology, and testing systems. They offer real added value wherever compact designs, high reliability, and fast diagnostic capabilities are required.Your Key Benefits at a Glance:Compact design – ideal for installations in confined spacesIntegrated LEDs – immediate indication of power supply, signal, or switching statusFast diagnostics – reduces downtime and simplifies maintenanceIP67 protectionEasy installation – time-saving and efficientTechnical Highlights:Depending on the version, the connectors feature two or three integrated LEDs that provide visual feedback on the current operating status. This enables quick commissioning, facilitates maintenance, and supports targeted fault diagnosis directly at the connection point – without the need for additional diagnostic tools.The connectors are available in axial and angled versions, both as device connectors and cable assemblies. The overmolded design ensures IP67-rated protection, making them suitable for use in demanding environments. To meet various application requirements, customers can choose between durable PVC cables and halogen-free TPU cables.Available in standard cable lengths – custom configurations available upon request.https://conec.com/en/news-en/m8x1-2-3-leds-gb/If you have any further questions about the products, your sales representatives and technical advisors will be happy to assist you and provide you with a personalized quote. Contact sales team

TE Connectivity: AMPSEAL Robust Headers

Wed, 26 Nov 25 00:00:00 +0100

As your specialist distributor for electromechanical components, we present AMPSEAL Robust Headers from TE Connectivity – the new generation of reliable PCB connectors for demanding industrial and automotive applications.Maximum robustness for harsh environmentsAMPSEAL Robust Headers have been specially developed for environments where strong vibration, moisture, and high mechanical stress are part of everyday life.Metal bushings at all four mounting points provide significantly increased stability on the PCB and ensure secure mounting, even under severe shock and vibration conditions.In addition, the series offers IP67 protection, allowing the connectors to operate reliably even outdoors and in contaminated environments.Powerful contact technologyThe compact connectors achieve a current carrying capacity of up to 17 A (gold contacts) or 8 A (tin contacts). With a contact size of 1.3 mm and a robust design, they are ideally suited for power-intensive applications.Flexible variants for modern PCB designThe series includes 8-, 14-, 23-, and 35-pin versions, each available as straight or 90° angled headers.Another advantage is full backward compatibility with existing AMPSEAL receptacle housings and accessories. This means that existing designs can continue to be used without modification.Typical areas of applicationElectric and hybrid vehiclesCommercial and special-purpose vehiclesConstruction and agricultural machineryRailway technologyIndustrial automationEnergy storage and outdoor electronics If you have any further questions about the products, your contact persons from the office and field sales teams will be happy to assist you and provide you with a personalized quote. Contact sales team

TE Connectivity: RT Choke Serie (25 A & 85 A)

Thu, 20 Nov 25 00:00:00 +0100

We are pleased to introduce TE Connectivity's powerful RT Choke series. The new common-mode chokes have been specially developed for modern high-current applications and offer efficient EMC filtering in compact, easy-to-install designs.Powerful, reliable, versatileThe new RT chokes now complement the two rated currents of 25 A and 85 A, making them ideal for demanding power electronics in industry and energy infrastructure. The RT series now covers rated currents from 6 A to 85 A without any gaps. Thanks to the availability of variants in horizontal and vertical orientations, the components can be optimally integrated into different device layouts and enable space-saving designs.Users can choose between ferrite and nanocrystalline core materials. This provides inductances of up to 17 mH (at 25 A) – ideal for reducing conducted interference in single- and three-phase systems.Designed for modern applicationsThe series meets the requirements of IEC 60938 and is designed for applications from DC to 400 Hz. With up to 300 VAC or 450 VDC, high temperature resistance, and a UL-certified insulation system, RT chokes offer high operational safety and long-term reliability – even under demanding environmental conditions.Typical areas of application:• Charging infrastructure for electric vehicles• Energy storage and battery systems (BESS)• Industrial drives and motor controls• Heat pumps and energy converters• High-performance industrial electronicsYour advantages as a userWith the RT Choke series, you get a future-proof EMC solution that:• Combines high current carrying capacity with a compact design• Enables cost-efficient PCB mounting• Improves EMC performance• Reduces development costs thanks to certified materialsNow availableThe new TE Connectivity RT chokes are now available from us. Please contact us for technical data, samples, or advice.If you have any further questions about the products, your sales representatives and technical advisors will be happy to assist you and provide you with a personalized quote. Contact sales team

Universal CCS charging sockets with cable set

Wed, 05 Nov 25 00:00:00 +0100

We present the new CHARX connect universal CCS Type 2 charging sockets from Phoenix Contact – now available for the first time with a pre-assembled cable set. The ready-to-install inlets with standard connectors offer a ready-to-use solution for manufacturers and integrators of electric vehicles, commercial vehicles, and mobile machines. Delivery from a single source significantly reduces your procurement and installation times – and thus also your overall costs. Technical highlights:Charging standard: CCS Type 2 (others on request)Cable length: 2 m (others on request)Connections:HVA-630 (AC)M8 cable lug (DC/PE)RCA or Econoseal (LV)DC charging current continuous: 200 A, 250 A, 375 ADC charging current boost mode: 500 A, 500 A, 700 ADC rated voltage: 1,000 VYour advantages:Ready-to-install solution saves time and moneyIndividual configuration of charging power, cable length, marking, and actuator voltageHigh-power charging with up to 700 kW in boost modeMaximum safety thanks to precise temperature measurement and high IP protectionAutomotive standard in accordance with IATF 16949 Conclusion:With CHARX connect universal, you get a powerful, flexible, and immediately integrable charging infrastructure component—ideal for demanding applications in the field of electromobility.If you have any further questions or would like to request samples, your contact persons in the office and/or field sales team will be happy to assist you and provide you with a personalized quote.Contact sales team

Binder M12 solutions for connectors

Tue, 04 Nov 25 08:59:27 +0100

With the ongoing decentralization in automation technology, the demand for compact and powerful components is growing. Large machine layouts are increasingly being replaced by space-saving designs that still offer high performance. This also requires connectors to be small, robust, and efficient.M12 connectors have established themselves as the standard for signal, data, and power transmission. They enable voltages up to 630 V, are easy to install, and can be flexibly integrated into a wide variety of applications.Thanks to standardized coding (S, T, K, and L), they offer safety and a clear separation of AC and DC applications.The various M12 series from binder cover numerous areas of application – from motor controls and frequency converters to lighting systems and network technology. This makes them ideal for compact machines and decentralized automation solutions.7/8" connectors – proven solutions for existing systemsWhile M12 connectors are used particularly in new systems with limited space, 7/8" connectors remain indispensable in existing systems. They are designed for high voltages and power ratings and, thanks to their robust construction, are ideal for industrial environments with larger components.They remain important, especially in regions where miniaturization is less advanced. binder thus covers both modern and proven system requirements.Both connector types meet high quality standards:Protection class IP67 or IP68UL certification according to UL2237 & UL2238Over 100 mating cycles service lifeTemperature range from -40 °C to +85 °CAccessories and adapters for flexible integrationBinder offers an expanded range of accessories and adapters for connecting modern and existing systems. These include redesigned 7/8“ T-distributors in 3-, 4-, and 5-pin versions for easy installation, a compact 5-pin T-distributor with L-coding for DC applications, and adapter solutions between M12 and 7/8” connectors. These enable step-by-step modernization and the development of hybrid system architectures.All products are available now and offer a reliable, secure connection in a wide range of applications.If you have any further questions, please contact your office and/or field sales representative, who will be happy to assist you and provide a personalised quote.Contact sales team

M17 PRO HYBRID: New industrial connector

Fri, 31 Oct 25 00:00:00 +0100

We are pleased to introduce the new M17 PRO HYBRID from Phoenix Contact. This innovative hybrid connector sets new standards in industrial connection technology and offers maximum performance in a compact design.Compact. Robust. StandardizedThe M17 PRO HYBRID combines power, signal, and data transmission in a single connector and meets the highest standards of safety and reliability. Thanks to its IP66/IP68 protection rating, it can be used reliably even in harsh industrial environments—ideal for applications in mechanical engineering, robotics, conveyor technology, and automation.Your advantages at a glanceONECLICK locking for secure, fast connection with tactile feedbackHigh voltage range: From 50 V to 630 V – flexible use for control and power currentStandardized M17 interface according to IEC – reduces the number of variants and simplifies planningDurable & maintenance-friendly: Ideal for frequent mating cycles or service applicationsEfficiency meets safetyThe new ONECLICK technology saves you time during installation and maintenance, while the robust housing design ensures long-term operational reliability. The combination of power, signal, and data in a single connector reduces cabling effort and sources of error—a clear advantage in modern industrial environments.ConclusionThe M17 PRO HYBRID is the future-proof solution for industrial connectors – standardized, efficient, and reliable.Take advantage of this innovation for your projects and benefit from the high quality you expect from Phoenix Contact – now available from us.If you have any further questions or would like a sample, your contact persons in the office and/or field sales team will be happy to assist you and provide you with a personalized quote.Contact sales team

TE Connectivity Dynamic HV Series HV10

Wed, 22 Oct 25 09:41:11 +0200

TE Connectivity (TE) is expanding its portfolio with the Dynamic HV Series HV10, a compact and powerful connector solution for high-voltage applications. As an authorized distributor, we are pleased to offer you this innovative product series with immediate effect. The Dynamic HV Series HV10 was developed specifically for use in battery distribution units (BDU) and battery management systems (BMS) – both in the field of drive batteries and for stationary energy storage systems (ESS).Thanks to its high-quality insulating material and a voltage rating of up to 1000 V, the HV10 connector impresses with its reliability, safety, and space-saving design.Key features:Voltage resistance: Up to 1000 VCompact grid dimension: Only 3.5 mm for PCB and cable connectionVariants: 6- and 8-pin (single row), 10- and 12-pin (double row)Space-saving: The double-row version reduces the vertical installation space requiredConvenient handling: Side locking for easy plugging and unpluggingSecure connection: The coding option prevents incorrect plugging between identical or adjacent rowsIf you have any further questions, your contact persons from the office and/or field service will be happy to assist you and prepare a personalized quote for you.Contact sales team

Circular connectors Bulgin Standard Vitalis Buccaneer

Wed, 08 Oct 25 14:47:14 +0200

Introducing Bulgin Standard Vitalis Buccaneer circular connectors – the reliable solution for demanding applications. With a modern, robust design, these connectors offer maximum safety and flexibility wherever reliable power distribution and signal transmission are essential.Advantages at a glanceThe Vitalis Buccaneer series impresses with its proven high protection rating (IP68/IP69K), which makes it particularly suitable for use in harsh industrial environments, such as control and drive technology, robotics, and outdoor installations. Even under extreme conditions – dust, moisture, or vibration – the connector remains permanently sealed and reliable.Versatility: From 2 to 32 poles, for a wide range of requirements and with a variety of connection techniques (screw, solder, or crimp connection).Durability: High-quality materials and innovative sealing technology ensure long-lasting, low-maintenance operation.Sustainability: Vitalis variants offer special solutions with bio-based materials and a reduced carbon footprint – a plus for future-oriented customers. (Up to 86% bio-based material by weight.) Your advantage as a userFactory-tested components and a simple installation process save you time and reduce the risk of costly downtime. Ease of use and high compatibility with existing systems ensure rapid integration into new and existing automation solutions.Ideal for automation and moreWhether for manufacturing automation, machine connection, intralogistics, or outdoor installations, the Bulgin Standard Vitalis Buccaneer series is your choice for secure, high-performance connections wherever robust protection and uncompromising reliability are required.You can find the product overview at: Standard_Vitalis_Buccaneer.pdfIf you have any further questions, your contact persons from the office and/or field service will be happy to assist you and prepare a personalized quote for you.Contact sales team

SUPERSEAL 1.0 – with flange, lever, and end housings

Wed, 08 Oct 25 13:16:56 +0200

The new Superseal Wire-to-Board Connectors 1.0. As your distributor for high-quality connection technology, we are pleased to offer you the expanded SUPERSEAL 1.0 connectors from TE Connectivity. These new products meet the increasing demands placed on electrical connections in modern vehicle and machine applications – especially where safety, durability, and ease of use are required.With the trend toward electrification in commercial vehicles, construction machinery, and industry, there is a growing demand for compact, reliable connectors for printed circuit boards. The new variants of the SUPERSEAL 1.0 series offer the ideal solution here. These include the latest addition, 34-pin connectors with flange, plugs with ergonomic lever mechanism, and new hard-silver-plated contacts that enable a stable connection even under high loads.Developed for vehicles, they are predestined for use in agricultural vehicles, heavy trucks, construction vehicles, two-wheelers, and passenger cars. The advantages at a glance:• The flange housings can be securely screwed together and ensure a tight fit – ideal for vibrations.• The lever on the plug makes it much easier to connect and disconnect, which reduces installation time.• End housings protect the connection from water and relieve strain on the cables – particularly important for high-pressure cleaning or rough use.• The new silver-coated contacts offer additional options for your customers – depending on their price-performance requirements. To receive a personalized quote, please contact our office staff directly: Contact sales teamFurther information about the products: SUPERSEAL 1.0 connector pin headers | TE Connectivity

Hummel - M16 angle connectors

Wed, 01 Oct 25 16:02:05 +0200

The new M16 right-angle connector from HUMMEL redefines connection technology: With a height of only 22 mm, it is the smallest M16 right-angle connector in the world – yet still delivers performance values on a par with M23.Ideal for your applications in automation and drive technology, modern motor designs, AGVs, mechanical engineering or sensor technology in robotics.The M16 right-angle connector offers maximum performance in minimum space without any loss of performance thanks to:• Only 22 mm height• Compatible with all M16 contact inserts• Reliable performance up to 25 A• 315° positionability for maximum flexibility• Twilock quick-release fastener and screw version for easy and secure installation• Combined power and signal transmission through free combination of known M16 pin configurations (e.g. 3, 4+3+PE 630V, 10, 12+3, 18)• Protection class IP67 / IP69K – robust and durableIf you have any further questions, please do not hesitate to contact our office staff, who will be happy to provide you with a personalised quote.

HARTING ICC 20 circular connectors

Tue, 16 Sep 25 14:53:38 +0200

HARTING is expanding its portfolio with the new ICC series (Installation Circular Connectors) in size 20 – a robust, modular circular connector with bajonet locking, specially developed for demanding industrial applications.The ICC 20 offers an optimal connection solution for industrial applications with limited installation space. Its round design makes it particularly suitable for applications such as industry, robotics, energy technology, automation and mobile machines where classic rectangular connectors cannot be used. Despite its compact design, it offers space for up to 28 contacts (Han D incl. PE) and is suitable for the transmission of power, signals and data.The integration of over 50 different application variants and the option of tool-free connection technologies such as push-in ensure high adaptability and easy installation.All enclosures in the ICC20 series offer high protection ratings (IP67/IP69) against the ingress of dust and water and are EMC-shielded – for maximum signal integrity even in demanding environments. HARTING offers the ICC20 4/3 (‘4Slash3’) connector for controlling and supplying drives in robotics and automation. It combines four power contacts (up to 40 A), three signal contacts (up to 10 A / 250 V) and one PE contact in a compact insulating body. Proven Han® C and Han D® contact technologies are used.The single-pole version is available for particularly energy-intensive applications, such as welding robots or heavy-duty robotics. It transmits up to 400 A at 600 V and is ideal for mobile machines and energy network infrastructure. Advantages:• Scalable thanks to Han® 3A compatibility (approx. 50 inserts)• Robust housing with IP67/IP69 protection• Up to 20% space savings thanks to compact design• Up to 50% more power (> 400 A)• Touch-proof contacts• Bajonet lock• Rear mounting possible• EMC protection• Pre-assembled cable assemblies• ICC20 4/3 (‘4Slash3’) with 4 power contacts (up to 40 A), 3 signal contacts (up to 10 A / 250 V) and 1 PE• Single pole variant for up to 400 A / 600 V• Crimp and push-in quick connection technology To receive a customised quote, please contact our sales department directly: Contact sales Further information about the product: HARTING ICC 20: Scalable, industrial circular connectors for use in harsh environments | HARTING Technology GroupFlexible and scalable circular connectors for harsh environments | HARTING Technology GroupHarting_ICC_Series.pdf

M12 hybrid connectors for Single Pair Ethernet

Fri, 29 Aug 25 00:00:00 +0200

The new Phoenix Contact SPE M12 hybrid PCB connectors are now available – ideal for modern automation solutions with the highest demands on efficiency and flexibility.As a long-standing partner of Phoenix Contact, we have in-depth expertise in the field of single pair Ethernet components. The robust connectors are suitable for both existing and future systems and promise a future-proof infrastructure.Your advantages at a glance:• Data and power transmission in one connector – saves components and reduces installation effort• Compact M12 design – perfect for space-critical applications in industrial environments• High-speed SPE up to 1 Gbit/s – for real-time and future-proof data communication• Powerful: 4 × 8 A at 63 V DC – particularly suitable for supplying redundant circuits• Standardized in accordance with IEC 63171-7 – guarantees compatibility and planning reliability across different manufacturersWhether in sensor technology, in the control cabinet, or in distributed automation architectures – with SPE M12 Hybrid, you can rely on a consistent Single Pair Ethernet infrastructure from the sensor to the cloud.What we offer you:For your project: Individual quotation, consultation, and technical support on request.If you have any further questions or would like more information about the Single Pair Ethernet program from Phoenix Contact, our office staff will be happy to assist you and provide you with a personalized quotation.Contact sales team

Trelleborg FDA/F&B products for the food industry

Fri, 29 Aug 25 00:00:00 +0200

With the latest solution from Trelleborg Cable Entry Solutions, a new product portfolio has been developed specifically for the food industry.With their blue design, these products meet the highest requirements of the food industry. They are easy to clean – ideal for production environments with a focus on cleanliness and hygiene.The hygienic membrane design enables the reliable and tight entry of cables and hoses into control cabinets, electrical controls, and machine applications, offering a high-performance alternative to conventional stainless steel cable glands. The range consists of rectangular cable entry plates with IP65 & IP66 protection ratings, round cable entry glands with IP66 & IP67, and round entry plates with IP65. The following series are now available in FDA:Rectangular cable entry platesMC series (IP65)MH series (IP66)Round cable glandsT-VET (IP66)T-GET (IP67)Round cable entry platesM-GD (IP65)The advantages at a glance:Products made from materials that comply with EU Regulation (10)/2011Wide range of products and suitable cable diametersEasy-to-clean designSimple installationHere you will find technical details and an overview of the products:FDA brochure_single pages.pdfIf you have any further questions, please do not hesitate to contact our office staff, who will be happy to provide you with a personalized quote.

Bopla aluminum enclosures & Conec hybrid connectors

Wed, 20 Aug 25 00:00:00 +0200

The Conec Hybrid series offers compact and secure connection solutions for data transmission and power supply in a single connector. A bayonet quick-release fastener ensures that the connection is only locked when fully inserted, thereby guaranteeing secure contact. The B23 hybrid flange enables a simple single-cable solution for servo drives, and angled flange connectors can be optimally adapted to different installation situations thanks to their rotatable housings. The robust housing made of nickel-plated die-cast zinc and the IP67 protection rating make the connectors suitable for harsh environments.The Bocube ALU from BOPLA is a robust aluminum electronics enclosure suitable for a wide range of applications. It offers protection classes up to IP69 and achieves this with just two cover screws hidden under design covers. The enclosure lid is available either smooth or with a recess for membrane keyboards, and the integrated hinge allows easy access to the interior. The base has a receptacle for an activatable pressure equalization membrane. All parts are made of metal and are ideal for demanding environments.Contact to sales team

SUPERSEAL 1.0 – with flange, lever, and end housings

Tue, 19 Aug 25 00:00:00 +0200

The new Superseal Wire-to-Board Connectors 1.0. As your distributor for high-quality connection technology, we are pleased to offer you the expanded SUPERSEAL 1.0 connectors from TE Connectivity. These new products meet the increasing demands on electrical connections in modern vehicle and machine applications – especially where safety, durability, and ease of use are required.With the trend toward electrification in commercial vehicles, construction machinery, and industry, there is a growing need for compact, reliable connectors for printed circuit boards. The new variants of the SUPERSEAL 1.0 series offer the ideal solution here. These include the latest addition, 34-pin connectors with flange, plugs with ergonomic lever mechanism, and new hard-silver-plated contacts that enable a stable connection even under high loads.Developed for vehicles, they are predestined for use in agricultural vehicles, heavy trucks, construction vehicles, two-wheelers, and passenger cars. The advantages at a glance:The flange housings can be securely screwed together and ensure a tight fit – ideal for vibrations.The lever on the connector makes it much easier to connect and disconnect, which reduces assembly time.End housings protect the connection from water and relieve strain on the cables – particularly important for high-pressure cleaning or rough use.The new silver-coated contacts offer additional options for your customers – depending on their price-performance requirements.To receive a customized quote, please contact our sales team directly: Contact sales Further information about the products: SUPERSEAL 1.0 connector pin headers | TE Connectivity

TE Connectivity DST Series Toggle Switch

Thu, 07 Aug 25 00:00:00 +0200

TE Connectivity introduces the DST series, a new range of sealed toggle switches designed specifically for use in harsh industrial and commercial environments. Thanks to IP67 protection, the switches are reliably sealed against dust and moisture and offer high operational reliability under demanding conditions.Various connection types (screw connection or quick-connect terminal) and two toggle lever designs are available for easy integration.The durable design allows for at least 30,000 switching cycles under electrical and mechanical stress. With high dielectric strength (1,500 V) and very good insulation values (at least 1,000 MΩ), the switches meet high safety standards in industrial applications such as machine control, heating, ventilation, and air conditioning, medical technology, and automotive engineering.Advantages at a glance:IP67 – protection against dust and moisture12 A load capacity at 125/250 VACDurability: at least 30,000 switching cyclesSelectable connection and lever variantsSuitable for industrial and commercial applicationsRobust materials with silver and nickel coatingVoltage resistance up to 1,500 VTo receive a customized quote, please contact our sales team directly:Contact our sales teamFurther information about the products: TE Connectivity: Every Connection Counts | TE Connectivity

Heat shrink tubing processing machines

Tue, 05 Aug 25 00:00:00 +0200

For professional processing of heat-shrink tubing in cable assembly, we offer powerful and versatile heat-shrink tubing machines for use. The machines are suitable for all common types and manufacturers of heat-shrink tubing – ideal for companies that value flexibility, quality, and efficiency.As a cooperation partner of TE Connectivity, we have in-depth expertise in the field of heat shrink tubing technology. Our Raychem demonstration machine (item no. 2234800-2) is optimally designed for processing these high-quality products, but can also be used with heat-shrink tubing from other manufacturers without any problems. This provides a future-proof solution for a wide range of cable processing requirements.Your advantages at a glance:Process reliability thanks to storage of 10 programs on the device or data collection via USB interface (USB stick or barcode scanner)Universal applicability for heat-shrink tubing from all manufacturersDemonstration machine on site for tests, training, and individual consultationProven quality through close cooperation with TE ConnectivityEfficient processing for series and special applicationsWhether for prototypes or small series, the heat shrink tubing machine impresses with its ease of use, consistently high processing quality, and short setup times.Test it now! Arrange a demonstration appointment and see for yourself the performance and versatility of the device. Our sales team will be happy to help you find a date:Contact the sales teamFurther information on the “Raychem RBK-X1” demonstration device and the corresponding accessories can also be found at RBK X1 Heat Shrink Machine | TE Connectivity.

Pre-assembled junction boxes for industrial applications.

Thu, 31 Jul 25 00:00:00 +0200

TE Connectivity's pre-assembled junction boxes offer a reliable solution for power and signal processing in industrial applications. The junction boxes are available with cable glands and terminals from the standard SNK series with PI spring connection technology or screw connection technology. The junction boxes have 3 to 5 cable entries, allow the connection of up to 3 outputs, and offer additional installation advantages thanks to the color coding of the terminals and an integrated busbar for motor applications.The Junction Box 6PNT and 12PNT variants are ideal for distributing power and signals, while the Junction Box Motor is specially designed for supplying power to motors.Your advantages at a glance:• Quick and easy installation without extra accessories• For different applications with various connection options• Suitable for indoor and outdoor use with IP66 protection • Pre-drilled holes for later expansionPossible applications:• Power supply for machines and systems • Applications in heating, ventilation, and air conditioning technology (HVAC) • Connection solutions for industrial production lines • Distribution of control and signal lines • Integration of safety-related components To receive a customized quote, please contact our sales department directly: Contact sales departmentFurther information about the products: DIN Rail Terminal Blocks & Panel Mount Blocks | TE Connectivity

Bulgin 4000 SPE for harsh environments

Wed, 16 Jul 25 00:00:00 +0200

Bulgin is expanding its portfolio of robust data connectors with the new 4000 Series Single Pair Ethernet (SPE) – a future-proof solution for industrial networks that combines high performance with a compact design.The 4000 Series is specifically designed for 10BASE-T1L applications and meets the requirements of IEC 63171-6. Thanks to Single Pair Ethernet technology, it enables the transmission of data and power over just one pair of wires – ideal for space-critical applications and the increasing miniaturization in industrial automation, building management systems, and sensor networks.A special feature is the secure bayonet lock, which ensures a fast and reliable connection even under harsh conditions. The connectors are protected in accordance with IP66 and IP68 (when plugged in) and can withstand even extreme environmental conditions (EN60068-2-52 Test Kb Salt Mist (Cylic) Marine Severity Level 1).The series includes:• Flex patch cables in various lengths (1–5 m) and cross-sections (22 AWG, 26 AWG)• Single- and double-sided cable assemblies• Front and rear panel mounting options• PVC or PUR jacket materials for different applicationsThe 4000 Series Single Pair Ethernet (SPE) is fully compatible with existing Bulgin Buccaneer systems and offers a tamper-proof design for increased security. This makes it ideal for Industry 4.0 applications where reliability, modularity, and easy installation are required.With this series, Bulgin underscores its expertise in developing robust, future-oriented connection solutions for demanding industrial applications.The data sheet for the series can be found at:4000_Series_SPE.pdfIf you have any further questions, your internal and/or external sales representatives will be happy to assist you and provide you with a personalized quote.Contact internal salesContact external sales

HARTING M17 circular connectors

Tue, 08 Jul 25 00:00:00 +0200

In order to continue guaranteeing the best solutions for you and your applications in the future, HARTING is expanding its product portfolio with the M17 circular connector.The HARTING M17 series offers very high power density with a rated voltage of up to 630V and a current carrying capacity of up to 26A at an ambient temperature of 40°C.Thanks to its compatibility with the M17 Speedtec (TE/Intercontec) and ONECLICK (Phoenic Contact) quick-locking mechanisms, the har-lock bayonet lock has created a wide range of applications and a high degree of flexibility and versatility in a compact and robust housing.The advantages at a glance:■ One housing series for power and signal applications:Power: 3+PE, 5+PE, 6+PE, 7+PE & 5+3+PESignal: 8, 12 & 17-pin■ Cable connectors with screw or bayonet locking (har-lock)■ The har-lock quick-locking mechanism is compatible with the M17 quick-locking mechanisms Speedtec and ONECLICK.■ Water- and dust-tight IP 66/67■ Operating temperature: -40 to +125°C■ You can freely configure your connector:Click here for the configurator:Circular Connectors M17, M23 & ICC If you have any further questions, please do not hesitate to contact our office staff, who will be happy to provide you with a personalized quote.Contact sales team

SCHLEGEL 2BSecure - Security solution

Thu, 03 Jul 25 00:00:00 +0200

In an increasingly connected world, the risk of cyberattacks and unauthorized access to machines and systems is growing. The new EU Machinery Regulation 2027 and the NIS-2 Directive impose strict cybersecurity requirements, forcing companies to protect their systems even more comprehensively.2BSecure from SCHLEGEL meets the legal requirements and offers an innovative solution for securing USB and Ethernet interfaces.2BSecure-USB for USB-A and USB-C interfacesUSB interfaces can pose a major security risk if they are not adequately protected. 2BSecure-USB disables the interfaces by default and only allows access after explicit authorization, for example via a key switch or RFID. This measure prevents the unauthorized introduction of malware and the copying of confidential data. With 2BSecure-USB, you retain complete control over all access and effectively protect your machines from undetected attacks.2BSecure-EthernetEthernet interfaces also pose a potential security risk. 2BSecure-Ethernet disables all network interfaces by default and only allows access after manual activation by authorized users. This solution ensures that your machines are protected against unauthorized network access and manipulation.2BSecure - Protect your InterfacesIf you have any further questions, please do not hesitate to contact our sales representatives.

Binder M12, L- & T-coded

Wed, 25 Jun 25 00:00:00 +0200

binder introduces new field-terminatable M12 connectors from the 813 (T-coded) and 823 (L-coded) series. The new models feature a robust stainless steel locking mechanism, meet IP67 protection standards, and are designed for over 100 mating cycles – ideal for harsh industrial environments.The 813 series offers 4 poles, supports cable diameters from 6–10 mm, and, with a rated current of 12 A (at 63 V), is particularly suitable for applications with increased protection requirements. Connection is via screw terminals for conductor cross-sections up to 1.5 mm² (AWG 16).The 823 series is designed for higher current loads up to 16 A, offers 4 or 4+FE poles, and supports cable diameters from 8–13 mm and conductor cross-sections up to 2.5 mm² (AWG 14). Here, too, stainless steel locking and IP67 certification ensure high reliability.Both series are temperature-resistant from -40 °C to +105 °C.With these connectors, binder offers a reliable solution for signal, data, and power supply in demanding industrial applications – especially in the context of Industry 4.0.

CHARX control vehicle vehicle charging control

Thu, 12 Jun 25 14:21:25 +0200

The CHARX vehicle charging controller from Phoenix Contact is a highly developed solution for the DC charging of electric vehicles. It not only enables efficient and safe control of the entire charging process, but also contributes to the integration of electric vehicles into the energy transition through the vehicle-to-grid function. The simple setup and compliance with demanding safety standards make the controller a flexible and future-proof choice for use in modern charging infrastructures. Advantages of the CHARX control vehicle:Universal applicability for all electric vehicles with CCS charging socketQuick setup thanks to pre-parameterisation for CCS inletsVehicle-to-grid-capable for bidirectional charging according to ISO 15118-20High safety standards from the automotive sectorE1 approval for road vehiclesSupports UN R155 and UN R156 for cyber security in the vehicle networkComplete control of the DC charging process, including locking actuator, LED status display, start/stop function and HV contactorsTemperature monitoring using sensor data for safe charging processesShort operating system start-up time for immediate operational readiness If you have any further questions, please do not hesitate to contact our sales team who will be happy to provide you with a personalised quotation.Contact the sales force

Test plugs for reliable tests and applications

Mon, 19 May 25 15:07:48 +0200

PTR HARTMANN offers a wide range of test plugs for common connections such as USB, RJ, Lightning, HDMI as well as power and audio connections. These test plugs are ideal for use in telecommunications, the infotainment segment and the automotive industry. They ensure long-lasting, reliable and low-wear contacting, even with large assembly tolerances.Thanks to their optimised insertion angles, the test plugs are perfect for testing electronic assemblies. They are used particularly frequently in end-of-line testing or when flashing devices. The use of cables with the original connector as an interface to the test system guarantees optimum data transmission.The test plugs are characterised by their robust design, which avoids sharp edges in the guide area. This ensures a long mechanical service life and protects the assembly from damage. Their compact design also allows them to be used in confined spaces and at the same time ensures that even lower-lying plug connectors can be contacted without any problems.You can find the article overview under: PTR-HARTMANN-Pruefstecker.pdfWith test plugs from PTR HARTMANN, you get a reliable and durable solution for your tests that fulfils the highest requirements.If you have any further questions, please do not hesitate to contact our sales team who will be happy to provide you with a personalised quotation.Contact the sales force

Phoenix Contact: SPC 4: Compact, safe, efficient

Mon, 05 May 25 09:26:33 +0200

The SPC 4 PCB connector series from Phoenix Contact combines an innovative design with high functionality to save space and production costs. With a pitch of just 6.35 mm, the series offers a compact solution that saves valuable space on the front of the device.A particular highlight is the innovative shield contacting, which gives developers new freedom in device design. This is complemented by a secure locking mechanism, either via top lock or centre flange, which fixes the connector firmly to the device.The SPC 4 series also focusses on efficiency: the THR headers are reflow solderable and allow automated assembly, which significantly reduces production costs. The tried-and-tested push-in connection, which can also be used to process large conductor cross-sections of up to 4 mm², ensures convenient installation.The series also scores points with its extended contact protection on the base strip and plug, which offers added safety. This makes SPC 4 ideal for applications where space, efficiency and safety are decisive criteria.Your advantages at a glance:- Compact: 6.35 mm pitch saves space on the front of the device.- Innovative: More freedom in device design thanks to clever shield contacting.- Safe: Extended contact protection increases safety.- Wide range of variants: Flexible locking options via Top-Lock or centre flange.- Efficient: Automated assembly and lower production costs thanks to THR headers.With the SPC 4 series, Phoenix Contact presents a sophisticated solution that sets new standards in design freedom, safety and cost efficiency.If you have any further questions or would like to request a sample, please do not hesitate to contact your contact person in the office and/or in the field, who will be happy to provide you with a personalised quotation.Contact the sales force

Schaffner products now available at Börsig

Mon, 31 Mar 25 00:00:00 +0200

Schaffner is an international leader in the field of electromagnetic compatibility (EMC) and power quality. With innovative solutions such as EMC filters, chokes, harmonic and LCL filters, Schaffner increases the efficiency of electrical devices and ensures a longer service life. Schaffner products are also established in the automotive industry and support compliance with international standards and the safety of electronic systems. Having made further progress with the integration of Schaffner into TE Connectivity over the past year, we are pleased to announce today: From now on you can cover your Schaffner needs directly through Börsig!If you have any further questions, please do not hesitate to contact your contact person in the back office who will be happy to provide you with a personalized offer.

New M16 generation from binder

Tue, 25 Mar 25 00:00:00 +0100

The areas of application for M16 circular connectors range from heavy machinery such as construction cranes and excavators to high-precision laboratory technology. They must ensure reliable connections even under extreme conditions such as cold, dirt and dust. Binder has developed a new generation of overmolded M16 connectors that meet these requirements.When redesigning the M16 connectors, the focus was on industrial applications such as mechanical engineering, camera systems and pressure sensors. These require high electrical reliability and a robust connector system."Crane and excavator applications are a good example: Fixed plug connections are essential here. Particularly in critical moments, such as when lifting heavy loads, they must fit securely and be easy to operate," explains Sebastian Ader, Product Manager at Binder.The new triangular design improves the handling of the connectors. The connectors can be securely plugged, unplugged and locked at any time.The overmoulded M16 connectors meet high requirements in terms of shock resistance, vibration tolerance and tightness. Their robust design ensures a reliable connection under extreme temperatures as well as in the presence of dirt or moisture.New modular system for greater efficiencybinder has redesigned the new generation from the ground up. While previous versions contained many existing individual parts, the new design is based on a modular system. This means that shielded and unshielded variants can be manufactured with just a few additional components, making production more efficient and cost-effective.The development of the new M16 connector took into account both the M16 standard (DIN EN 61076-2-106) and the strict requirements of the AISG standard (8-pin shielded version). Improvements to the sealing system solve previous compatibility problems and ensure optimum tightness in accordance with IP68. The new generation is also lead-free and complies with the EU RoHS2 Directive (2011/65/EU, 2015/863/EU).

ZeroSmog Guard: Clean air at the workplace

Thu, 13 Mar 25 00:00:00 +0100

Clean air is every worker's right! With the new Weller ZeroSmog Guard solder fume extraction units, you can breathe fresh air all day long in a healthy working environment. The extraction units have been specially designed for continuous use under the workbench in production environments and use state-of-the-art filter technology to ensure maximum air purity and health protection.Highly effective filtration for maximum safetyThe ZeroSmog Guard series achieves a particle filter efficiency of 99.95 % and removes numerous different gases. By combining a powerful fan with a high flow rate, soldering fumes are effectively filtered, odours are neutralized and air quality is significantly improved. The result: cleaner air and safer protection for all users in soldering environments.User-friendliness meets efficiencyIn addition to their quiet operation (less than 50 dB), ZeroSmog Guard devices offer a high level of user comfort. The simple filter change minimizes maintenance requirements, while the system is ESD-safe and optimized for use in modern, networked production environments. Thanks to the remote display and connectivity to WXsmart systems, simple operation is guaranteed, which is specially designed for individual workstations.Flexible and modularThe modular housing of the ZeroSmog Guard series can be adapted to individual requirements. With a broad portfolio of fan, blower and filter types as well as optional accessories, the devices can be easily expanded. Quick filter change for lasting efficiencyThe extraction systems combine medium-fine dust pre-filters with main filters consisting of particle filters (HEPA H13) and broadband gas filters. An optional gas-only filter is also available. The intelligent flow principle ensures quick and easy replacement, which guarantees consistent operational reliability.Your benefits at a glance:Health protection: Efficient particle and gas filtration with a powerful fanUser comfort: Quiet, low-maintenance, easy filter change, ESD-safeModular: Expandable housing, wide range of accessories, networkable unitsWith Weller ZeroSmog Guard, you enjoy the best possible health protection and create a safe, clean working environment.If you have any further questions, please do not hesitate to contact your sales representative who will be happy to provide you with a personalized quote.

Flexitast: Pushbutton with integrated display

Wed, 26 Feb 25 00:00:00 +0100

With Flexitast, SCHLEGEL offers a pushbutton that not only impresses with its integrated display, but also with its versatile and dynamic display options. Equipped with a 72 x 72 pixel ZBD display specially developed for SCHLEGEL and RGB backlighting, Flexitast enables flexible and precise display of texts and symbols.Thanks to a unique display technology, the displayed content remains visible even without power supply - an optimal solution for applications with uninterrupted information display. The elegant design, combined with shatterproof glass, protects the display while ensuring robust and durable useThe Flexitast is configured simply and intuitively via a web browser by connecting the button or gateway to an internet-enabled device via USB and loading it into the front end.Advantages at a glance:Robust construction with shatterproof glassFlexible design: display of texts and symbolsConfiguration: All standard Schlegel symbols are availableOwn symbols can be uploaded and activatedExcellent illumination thanks to RGB backlightingNo energy dependency of the screen contentIP65, operating temperature -10°C to 50°C, over 1 million switching cyclesSustainable: no plastic signs requiredTime and cost savings: only one item requiredFlexitast is available in three versions: as a single button that is controlled via an external system, as an interconnected system with up to 128 Flexitast buttons that communicates via a bus system and as a customized version for optimum integration into existing systems. For more informations about Flexitast.If you have any further questions, please do not hesitate to contact your sales representative.

Binder: M5 flange parts angled

Mon, 24 Feb 25 00:00:00 +0100

Angled M5 flange parts for space-critical applicationsThe increasing complexity of industrial applications places high demands on connector systems - especially where installation space is limited. binder, the specialist for circular connectors, is therefore expanding its portfolio to include angled M5 flange parts that have been specially developed for compact and robust applications. This opens up new possibilities for automation, robotics and measurement and control technology.Every millimeter counts, especially in PCB assembly. Connector systems that can be used in the tightest of spaces are increasingly in demand - as is the case for a supplier of complete electrical and IT solutions.Space-saving solutions for compact applicationsThe angled M5 flange parts are essential components for connector systems that enable electrical and mechanical connections in the tightest of spaces. They are primarily used in applications where a lack of space is a challenge - for example in industrial camera technology, automation sensors, analysis devices, cobots and drones. The connectors offer high reliability and robustness, especially for robotics and measurement technology applications.The development of these flange parts presented binder with particular challenges. “An angled M5 version is already demanding, but the customer also required a compact design of maximum 7.5 mm x 7.5 mm. Geometric limits such as wall thicknesses and insulat.

Machines and equipment for Raychem heat shrink tubing

Tue, 28 Jan 25 00:00:00 +0100

Raychem products are used in numerous industries, including the electrical, energy, automotive, aerospace and construction sectors. They are used to protect, insulate and seal cables, connections and components, even under extreme conditions. Their versatility is the basis for reliable and durable solutions in demanding environments. TE Connectivity's machines offer precise temperature control, reliable performance and ease of use, ensuring consistent processing and high quality. Thanks to their versatility and durable design, they are suitable for various applications in different industries. Semi-automatic machines such as the ‘RBK X1’, ‘RBK X1C’ and ‘XS-D1’ models are suitable for quantities of 60 to 120 pieces per hour. Automated machines such as the ‘XB17’, ‘XB-19’ and the ‘Model 105’ can process up to 500 pieces per hour. Almost all machines support the processing of in-line connections, end splices, ring terminals and wire bundles, whereby optional accessories may be required for certain applications. The purchase of these machines is particularly worthwhile, as semi-automated or automated processes increase efficiency and reduce operating costs in the long term.Detailed technical information and further product details can be found on the page: Machines and processing equipment for heat shrink tubing | TE Connectivity.The product video shows the model ‘RBK-X1’.If you have any further questions about Raychem machines and processing equipment, please do not hesitate to contact our sales team who will be happy to provide you with a personalised quotation. Contact the sales force

HARTING customised housings from one unit

Fri, 17 Jan 25 00:00:00 +0100

With the Han® Configurator, HARTING offers you the opportunity to design your own customised housing - starting from just one piece. Whether for automation, robotics, machines, railway production or wind turbines; you can customise all housings to your requirements.Simply select the desired raw enclosure in the configurator and it can then be created according to your ideas. Both drill holes (through selected cable glands) and the labelling can be inserted and created according to your ideas. In the CAD model of the configurator, you can see your enclosure and the surfaces that you can edit. Double-click to open a window in which the selected components can be moved. The labelling is also displayed and can be moved to the desired position in the window.You can save your configuration and call it up again at any time. If you wish to enquire about or purchase your enclosure, your self-designed enclosure will be assigned its own article number, which you can use to order it again.If you would like to configure your customised enclosure with us, please do not hesitate to contact us.If you have any further questions, your contact person will be happy to help you create your personalised enclosure.Contact the sales force

TE Connectivity: Safety Light Curtains

Wed, 18 Dec 24 00:00:00 +0100

Safety light curtains from TE Connectivity have been developed to ensure the protection of people, machines and the environment. With a wide range of safety requirements in the fields of industrial automation, robotics and machinery. The SLC4 and SLC2 light curtains offer reliable detection and monitoring of functional safety.Special features at a glance:With a minimum cross-section of 28 x 30 mm, these products are one of the smallest light curtains on the market that also have all the integrated safety functions. Thanks to the special position of the 1st beam, the products have no blind spot and therefore also ensure that the protected area retains its resolution right to the end of the light curtain.In contrast to the SLC2 series, the SLC4 series has a higher safety level and a lower resolution of just 14 mm for finger protection. Further advantages: - High degrees of protection IP67 and IP65 - Temperatures from -30°C to +55°C- Quick & easy installation and replacement thanks to M12 connectors and the use of unshielded cables- No programming required- User-friendly diagnostics via LED status display with alignment aid- Type 2 and type 4 light curtains approved in accordance with- EN IEC 61496-1/-2- ANSI / UL 1998- Safety light barriers for body protection- Safety light curtain for finger and hand protection- Accessories such as support columns with deflecting mirrors and swivelling brackets allow the light curtain to be rotated, for example, as well as more secure floor mounting with precise adjustment Further information on the products can be found in the product flyer. The corresponding article list can be found under Article list. If you have any further questions, please do not hesitate to contact your sales team.Contact the sales force

M12 SMT PCB connector from PROVERTHA

Tue, 10 Dec 24 00:00:00 +0100

M12 SMT circuit board connector – RuggedizedThe design of the Ruggedized-series fulfils both the requirements for high functional reliability and optimum routing on the PCB. The conductor tracks can be routed vertically and horizontally through and out of the connector on all sides. With an installation height of just 16 mm, this connector offers a space-saving solution and the new tamper-proof M12 housing supports both push-pull and screw locking.The ruggedized connectors are versatile and can be used in industrial automation, industrial Ethernet networks and railway applications thanks to the available standard codings (A, B, D, X). Their special contact design with elastic connection contour and larger SMT connections, in combination with the mounting brackets and their four large connection pads, ensure high resistance to transverse and shear forces. As a result, they offer maximum functional reliability and prevent the connections from tearing off under heavy loads.Further data: - IP67- Temperature range -40°C to 125°C (without O-ring)- Maximum connection reliability at the contacts of the PCB connection, e.g. in the event of vibration or shock in accordance with IEC 61076-2-101 and -109- High current carrying capacity- are designed for processing in the fully automated SMT processM12 SMT circuit board connector 90° – RuggedizedWith an installation area of just 15.5 mm x 5.5 mm and a height of 14 mm, the 90° versions of PROVERTHA set new standards in miniaturisation and offer maximum functional reliability thanks to the special contact geometry. The tamper-proof M12 housing supports push-pull and screw locking, enables a sealed arrangement of the interfaces and is therefore ideally suited for use in Ethernet switches, for example.These angled connectors, which can be processed automatically in the SMT process, offer maximum flexibility thanks to selectable coding positions. Manufactured from high-performance thermoplastic, they offer high current carrying capacity and tracking resistance. M12 SMT circuit board connector – SlimlineThe SMT slimline circular connectors from PROVERTHA in M12 format with spring-loaded contact connection are ideal for critical mechanical PCB interfaces. The connectors offer a compact design and are compatible with circular connectors from other leading manufacturers. They are available in unshielded and shielded versions and offer a 30% higher resistance to tear-off of the connections under mechanical stress compared to conventional M12 SMT connectors.With a height of just 17 mm or 18 mm, they are particularly suitable for applications with limited installation space. The M12 installation housing enables a sealed arrangement of the interfaces and supports push-pull and screw locking. The slimline connectors are optimised for the automated SMT process and are available in A, B and D codings.If you have any further questions, please do not hesitate to contact your sales representative who will be happy to prepare a personalized offer for you.Contact the sales force

Weller ZeroSmog Shield Pro solder fume extraction system

Wed, 20 Nov 24 00:00:00 +0100

Increase productivity and ensure a healthier working environment with the innovative Weller ZeroSmog Shield Pro solder fume extraction system! Clean air in the workplace promotes employee health and increases concentration - and that's exactly what this state-of-the-art system offers.The ZeroSmog Shield Pro has been specially developed to effectively remove pollutants and odors generated during soldering. With powerful particle and gas filtration (EPA E10 and activated carbon), the system ensures a fresh and clean working environment. Thanks to its compact, stackable design, it fits seamlessly into any workspace without taking up valuable space.Highlights of the Weller ZeroSmog Shield Pro:Effective filtration: clean air thanks to highly efficient particle and gas filtration, including odor removal.Quiet operation: Despite the powerful fan, the device is pleasantly quiet at just 50 dBA.Compact design: Save space on the workbench - the device is stackable and can be perfectly integrated with Weller soldering stations.Automatic Stop & Go: As soon as the system is connected to a Weller soldering station, filtration starts and stops automatically when the soldering iron is used.Easy maintenance: Changing the filter is quick and uncomplicated, so you can concentrate fully on your work.With a maximum air flow rate of 32 m³/h and a vacuum of 490 Pa, the Weller ZeroSmog Shield Pro is ideal for demanding soldering work.Technical data:Dimensions: 269.5 x 212 x 110 mmWeight: 2 kgOperating noise: 50 dBA (59 dBA at maximum speed)Power consumption: 20 WScope of delivery:ZeroSmog Shield Pro extraction unitEPA E10 filterpower supply unitGet the Weller ZeroSmog Shield Pro and make clean air in the workplace a priority!If you have any further questions, please do not hesitate to contact your sales representative who will be happy to provide you with a personalized quote.Contact the sales force Further information on the product can also be found on the Weller Tools website:ZeroSmog Shield Pro | Weller Tools

Huber and Suhner EV-C 2 connection system

Fri, 08 Nov 24 09:31:11 +0100

The EV-C connection system introduced in 2019 has been further developed by Huber und Suhner and now offers the RADOX EV-C 2 maximum reliability and improved protection against vibrations. Thanks to a pre-coated thread, it ensures greater tightness and increased mechanical resistance. The system also reduces installation time on the vehicle and offers an improved sealing concept as well as a shorter thread for applications with thin walls. The materials of the EV-C 2 have been specially selected to meet the requirements of the RoHS 3 Directive (EU 2015/863) on the restriction of hazardous substances in electrical and electronic equipment.Developments in the field of electric vehicles mean that heavy-duty vehicles such as e-buses and e-trucks are increasingly being integrated into everyday life. However, the high-voltage connections in e-vehicles are often exposed to high mechanical loads, which can affect the reliability of the entire high-voltage system - especially under extreme operating conditions. The new RADOX EV-C 2 minimizes the risk of system failures and high-voltage hazards that can be caused by vibrations and other mechanical influences.The RADOX EV-C 2 is the latest addition to HUBER+SUHNER's EV-C portfolio and continues to offer the proven benefits of its predecessor, such as outstanding shielding attenuation, protection against contaminants such as dirt, dust, moisture or chemicals and the prevention of cable displacement or twisting during operation. In addition, the EV-C 2 uses the proven RADOX technology, which is based on an electron beam cross-linking process for cables. The combination of this technology with the improved EV-C 2 results in an optimal connection system for high-performance applications.With options for single-core standard and flex cables as well as multi-core cables, the system offers a wide range of configuration options for the M20, M25 and M32 interfaces used in electric vehicles. The EV-C 2 has been externally tested to the latest automotive standards and can be ordered as a high voltage cable assembly with a choice of other validated connectors. The solution is now available and in series production.If you have any further questions, please do not hesitate to contact your sales representative who will be happy to provide you with a personalized quote.Contact the sales force

binder solutions

Tue, 05 Nov 24 00:00:00 +0100

The binder company offers not only the classic connector, but also a comprehensive service for the development of innovative technical solutions, from the initial idea through to series production, via the binder solution line. The entire development process is covered - from pre-development, analysis and process development through to validation and verification.We at Börsig actively support you and also cover the storage and logistics side so that you have everything from a single source, from pre-development to analysis and process development through to validation and verification.Particularly noteworthy is the ability to develop and implement both prototypes and series production entirely from a single source. This means that the customer is supported from the initial concept idea through to the manufacture of prototypes and final series production.Examples of fields of application:1. e-mobility and smart grid:For the e-mobility sector, the company develops DC high-voltage charging systems that have to meet particularly high safety requirements. These systems have a modular structure and offer a flexible, customizable design. One particular aspect is user-friendliness - even for users without technical expertise. From prototypes to series production, the systems are designed to be safe and intuitive in order to avoid hazards such as fires.2. printed electronics:This uses a special pad printing process that enables the direct application of electrical functional layers to three-dimensional or structured surfaces. Printed sensors such as touch, temperature or force sensors as well as heating applications and conductor paths can be realized in various forms in this way. The process is particularly suitable for applications where flexibility and freedom of form are crucial. The development of initial functional samples through to products ready for series production is a key aspect of the range of services.3rd IoT distributor:For the requirements of Industry 4.0, binder presents the IoT distributor from the “Concept Connectors” series.This solution supports data-controlled processes and smart applications such as monitoring functions, the recording of usage data and convenience functions.binder solutions thus offers special solutions in a wide variety of application areas, including automation, measurement and control technology, medical technology and many other areas.If you have any further questions, please do not hesitate to contact your internal sales representative who will be happy to prepare a personalized offer for you. Contact our office staff

TE Connectivity: DEUTSCH DT Colored Connectors

Wed, 23 Oct 24 00:00:00 +0200

Deutsch DT connectors are powerful and reliable connections that are used in many different applications. Protection against moisture, dirt, extreme temperatures and reliability even under strong vibrations are just a few of the advantages of this product range.The new brown, green and blue colors provide visual identification, which can help to avoid confusion of connections and thus also enable the identification of different systems.The housing made of thermoplastic material, which has been awarded V0 certification, impresses with its high resistance to a wide temperature range and resistance to UV radiation. The silicone seals on the cables and interfaces on the back ensure that neither dirt nor moisture can penetrate and therefore meet protection class IP68.Further advantages:High degrees of protection IP67, IP68 and IP6K9K (with rear panel)Uses the powerful DEUTSCH size 16 contact systemDesigned for extreme temperatures (-55°C + 125°C) and vibrations at motor levelMade from technical synthetic resin materials that are flammable in accordance with UL94 V-O Further information on the products can be found in the Product FlyerYou can find the corresponding article list here If you have any further questions, please do not hesitate to contact your sales representative who will be happy to prepare a personalized offer for you.Contact the sales force

Discover Push-X - the new wiring experience

Tue, 08 Oct 24 00:00:00 +0200

Phoenix Contact presents Push-X: the pioneering innovation in tool-free conductor connection. This technology enables easy contacting of all conductor types, without tools and with minimal effort. The pre-tensioned contact spring forms the centerpiece that effortlessly connects both rigid and flexible conductors, with or without ferrules. Making contact is child's play by gently tapping the release surface. Connected conductors are released in a similar way to push-in technology, by pressing the orange-colored trigger. This revolutionary technology optimizes wiring efficiency for manual and automated processes.Advantages of Push-X technology:Quick installationMore flexibilityHigh ease of useEasy loosening and clampingHigh compatibilitySafe wiringProduct overview:The XT terminal blocks are the first of their kind with a front-accessible Push-X connection. This enables clear and uncomplicated wiring. Initially available with a nominal cross-section of 2.5 mm², they are suitable for connecting conductors from 0.5 mm² to 4 mm². Product list XT terminal blocksThe XTV terminal blocks with side connection are available for nominal cross-sections of 6, 10 and 16 mm² and enable easy wiring of conductors with cross-sections from 0.5 to 25 mm².Product list XTV terminal blocksThe new XPC 1.5 PCB connectors are compatible with the COMBICON PCB connectors with a 3.5 mm pitch and also feature the innovative Push-X technology, which allows conductors up to 1.5 mm² to be connected. Further connector variants for 2.5 mm² and 4 mm² will soon follow the XPC 1.5 already available.Product list PCB connectors XPC 1.5Thanks to the innovative Push-X technology, the Push-X functional terminal blocks can be wired almost effortlessly. These include transformer terminal blocks as well as disconnect and knife disconnect terminal blocks. Product list Push-X function terminalsIf you have any questions or require additional information, please do not hesitate to contact our office staff, who will be happy to provide you with a personalized quote. Contact the sales forceYou can download the Push-X technology brochure here.

ERNI VolTron 1000V connectors

Tue, 17 Sep 24 00:00:00 +0200

The new and innovative ERNI VolTron 1000V connector from TE Connectivity has been specially developed for use in battery management systems (BMS) and battery disconnect units (BDU) and meets the highest performance and reliability requirements.It is ideal for applications where continuous high-voltage measurement is required, especially in automotive and power electronics. With a maximum operating voltage of up to 1000V and a dielectric strength of 2,500V (LV215) / 3,700V, it offers safety and precision even in the most demanding environments.Thanks to its compact design and reduced connector height, the connector is particularly suitable for applications where space is critical. In addition, its CTI 600 materials and gold-plated contacts are designed for a long service life and ensure absolute reliability even at extreme temperatures from -55°C to 150°C.The outstanding features also include vibration resistance, primary and secondary locking and the SMT connection. With at least 500 mating cycles, the ERNI VolTron 1000V connector is robust and durable.It also meets the requirements of the LV215 and USCAR 37 standards, making it an ideal choice for use in modern battery architectures. Discover the ERNI VolTron 1000V connector and other ERNI products from TE and benefit from the quality and innovative power in the field of high-voltage technology. Further information on the product can be found at ERNI VolTron 1000 | TE Connectivity. If you have any further questions about ERNI products, please do not hesitate to contact your sales representative who will be happy to provide you with a personalized quotation. Contact to the sales team

Further Development of EtherCAT-P by Conec

Wed, 04 Sep 24 00:00:00 +0200

EtherCAT is an Ethernet-based communication technology known for its high transmission speed, used in automation technology for real-time synchronization. EtherCAT-P extends this technology by integrating a 24V power supply. This combination allows both data and power to be transmitted over a two-wire cable pair, leading to a compact and cost-effective device connection.On a second cable pair, data and the peripheral voltage (Up) for actuators are also transmitted. This results in an efficient and space-saving wiring solution. EtherCAT-P provides a significant extension for industrial real-time Ethernet systems (Industrial Ethernet) and presents an attractive alternative to other technologies like Power over Data Lines (PoDL) or Hybrid Single Pair Ethernet (SPE).Although EtherCAT has not yet achieved the highest market share in industrial communication, it has shown remarkable growth rates in recent years. EtherCAT-P is likely to support this trend. Furthermore, market relevance is expected to increase as EtherCAT-P interfaces are implemented in automation modules by well-known manufacturers.With simplified wiring compared to Industrial Ethernet and higher data throughput rates compared to traditional fieldbus systems, EtherCAT-P forms a technological bridge on the path to SPE, which is expected to take some time to materialize in practical applications.Key Advantages at a Glance:RobustIP67 and good chemical resistanceCompact connector systemData and power over one data pairVariable connection and installation options on the device sideIf you have any questions, our sales team, both internal and external, will be happy to assist you.Contact to the sales team

SCHLEGEL Modular Contact Blocks: Screw and Push-In

Tue, 20 Aug 24 00:00:00 +0200

Powerful contact elements often face the challenge of achieving a low installation depth within limited space. The MK Series from SCHLEGEL offers the ideal solution: minimal size with maximum performance.Thanks to the module holder for up to three individual modules, the contact blocks can be configured individually—whether for normally open (NO), normally closed (NC) contacts, illumination elements, or additional connection modules. The MK Series is compatible with all modular contact blocks from SCHLEGEL and fits into 22.3 mm and 30.5 mm mounting holes. With a lifespan of up to 1 million switching cycles, the robust contact elements ensure long-lasting reliability.The modules are available in two variants:MK with screw terminals: suitable for up to 3A and 480VMKP with push-in connection: provides high contact stability even under strong vibrations and reduces wiring time.SCHLEGEL's MK products are now available from stock.*Link to the product video of the MK Series with screw terminals*Link to the product video of the MK Series with Push-In connectionIf you have any questions, our sales team, both internal and external, will be happy to assist you.Contact to the sales team *Privacy Notice:When you access the YouTube video, personal data (such as your IP address) will be transmitted to Google LLC, the operator of YouTube. Google may process this data in the USA. Please be aware that the USA does not currently provide a level of data protection comparable to that of the EU. For more information on data processing and privacy by YouTube, please refer to Google's privacy policy at https://policies.google.com/privacy.By clicking on the video, you consent to the processing of personal data. If you do not agree, please refrain from playing the video.

Installation connectors from Phoenix Contact

Tue, 06 Aug 24 00:00:00 +0200

The IPD, PRC and QPD installation connectors and distributors offer you an uncomplicated and flexible way to connect cables. Depending on your requirements, you can choose between simple cable connection, convenient power distribution or compact device connection. With robust housings and protection classes up to IP69K, Phoenix Contact guarantees reliable power transmission, even in outdoor and damp areas.Your advantages at a glance:Precisely fitting connection technology for every application: Whether fast IDC contact, simple push-in technology or proven screw connection Quick and easy installation: You don't need any special tools for assembly.Flexible power distribution: Use fixed and pluggable variants for your specific requirements.High reliability: The housings with protection ratings up to IP66/IP68/IP69/IP69K and impact resistance IK08 ensure long-term safety.End-to-end protection of the electronics: the enclosures remain closed even when the supply cables are connected.H and Y distributors available for all three installation systemsMain features IPD installation connectors and distributors:With push-in connection on the device side (tool-free)On the field side with push-lock connection (tool-free)3- and 5-pole variantsBayonet quick-locking mechanismVoltage up to 690 VCurrents up to 20 AConnector conductor cross-section: 0.5 mm² ... 2.5 mm²Protection class: IP66, IP68, IP69KMain features QPD installation connectors:QUICKON quick connection technology (IDC)3/4/5-pin Voltage up to 690 VCurrents up to 40 AConductor cross-section from 0.5 mm² to 6 mm²Protection class: IP66/IP68/69KImpact resistance: IK07Temperature range: -40 °C ... +100 °CMain features PRC installation systems:Screw or crimp connectionRated voltage up to 690 V Rated current up to 35 AConductor cross-section: from 1.5 mm² to 6 mm²Protection class IP66/IP68/IP69KImpact resistance: up to IK082- to 7-poleUp to 2,000 mating cyclesColored and mechanical codingChoose one of these installation systems and benefit from easy handling, high flexibility and maximum reliability.All installation systems at a glanceIf you have any further questions, please do not hesitate to contact your contact person in the office and/or in the field, who will be happy to prepare a personalized offer for you.Contact to the sales team

HARTING Han-Modular® RJ45 Domino Modules

Mon, 15 Jul 24 00:00:00 +0200

HARTING presents the RJ45 modules as the latest development in the Han-Modular® Domino module series. This allows you to combine your network applications with other applications in one connector to save space.Whether in automation, robotics, mechanical engineering, railroad technology or wind turbines - you can combine power, signals, data or compressed air as well as pin and socket contacts in one module.The special thing about the domino modules is that they consist of two separate fields, the so-called "cubes", like a domino. These have a plug-in face with two almost square surfaces and can be individually configured to meet your specific requirements. Each module consists of a cube with a small tab and a large tab for fixing in the holding frame and is joined together by an interlocking mechanism.Thanks to its compatibility with the Han-Modular® series, the Domino system can be easily integrated into existing systems. Existing housings, holding frames and connector modules can be supplemented and continue to be used. The RJ45 range consists of four different modules or eight variants, each with one small and one large tab (1 / 2):Han Domino RJ45 cube, IDC cat5 M.1 - 09 14 945 1003Han Domino RJ45 cube, IDC cat5 M.2 - 09 14 945 2003Han Domino RJ45 cube, gender changer F.1 - 109 14 945 1101Han Domino RJ45 cube, gender changer F.2 - 09 14 945 2101Han Domino RJ45 cube, IDC cat6 M.1 - 09 14 945 1002Han Domino RJ45 cube, IDC cat6 M.2 - 09 14 945 2002Han Domino RJ45 cube for patch cable M.1 - 09 14 945 1001Han Domino RJ45 cube, patch cable M2 - 09 14 945 2001 The advantages at a glance:Up to 50 % space saving thanks to smaller and lighter connectors, both during production and transportationCost reduction during installation and operation of machines and systemsMaximum flexibility thanks to free configurationShorter installation times thanks to the combination of several individual connectorsReduced personnel costs thanks to shorter assembly timesCompatibility with the Han-Modular® seriesSustainability through consistent modularization The Harting Han-Modular® RJ45 Domino modules will soon be available from stock. If you have any further questions, please do not hesitate to contact your internal sales representative who will be happy to provide you with a personalized quotation.Contact to the sales team

Robust Ethernet Buccaneer connectors from the 600 series

Mon, 08 Jul 24 00:00:00 +0200

The 600 series Ethernet Buccaneer connector from Bulgin is robust, powerful and has been specially developed for harsh operating conditions where conventional Ethernet interfaces often fail. This makes them perfect for outdoor, industrial and military applications. They are available in both unshielded and shielded versions, which provide excellent shielding against electromagnetic interference (EMI).The series includes cable connectors with union nuts, coupling sockets for flying lead connections and flange sockets in various mounting versions for the device side. The connectors are available with or without dust protection caps.The 600 series connectors offer IP68 protection when mated and, with the optional sealing caps, also when unmated. This ensures maximum reliability against the ingress of dust and water and secure contacting, even under extreme conditions, in a wide temperature range and even with vibrations.Further features:compliant with Cat 5e and Cat 6aoffers data transmission rates of 10, 100 and 1,000 Mbpssuitable for POE, POE+ and POE++ideal for DATA, VOIP and IPTV in demanding environmentsservice life of more than 500 mating cyclesOperating temperature range from -40°C to +100°CProduct overview If you have any further questions, please do not hesitate to contact your contact person in the office and/or in the field, who will be happy to prepare a personalized offer for you.Contact to the sales team

binder M12 SMT connector series

Tue, 25 Jun 24 00:00:00 +0200

binder now also offers several M12 connector series for surface mounting. SMT (Surface Mount Technology) is space-saving and ideal for automated processes, which enables considerable savings.Especially for automated further processing, such as the dense, double-sided assembly of PCBs. This application can be found in automation technology, sensor technology, actuator technology and robotics.SMT: Efficient and space-savingDue to the miniaturization of electronic assemblies, surface mounting has proven itself with high component density. In contrast to classic through-hole technology (THT) or through-hole reflow (THR) technology, SMT contact pins are soldered directly onto the surface, which saves a significant amount of space. This is ideal for the tight assembly of connectors in automation technology.SMTs are usually supplied in blister tapes (tape & reel), which makes them suitable for automated processing. This automation capability and space-saving assembly offer significant advantages, especially for large quantities or complex PCBs. They also improve heat dissipation, signal integrity and reduce the susceptibility to errors during assembly.SMT product variety from binderbinder offers SMT products with 4, 6 and 8 poles and various codings, both shielded and unshielded. M12 connectors are available in various sets with flange housings, as built-in parts in blister packs or tape & reel packs.The A-coded M12 connectors of the 713/763 series, B-coded 715/766, as well as the D- and X-coded 825/876 series are suitable for various applications: A-coding for sensors and DC power, B-coding for Profibus and D/X-coding for Ethernet with up to 100-Mbit and 10-Gbit respectively.All M12 products from binder offer IP67 protection against dust and water and adapt to standard PCB drilling patterns, making it easier to switch to binder products.If you have any questions or require additional information, please get in touch with our contacts in the office or in the field.Contact to the sales team

HUBER + SUHNER RADOX® HV-CABLE

Mon, 10 Jun 24 00:00:00 +0200

HUBER+SUHNER RADOX® HV CABLESIn order to realize safe, durable and robust connections between connectors and HV cables, HUBER+SUHNER has invested in EMPT technology ( electromagnetic pulse technology ) to produce cable assemblies both in the prototype area and in smaller series production.The HUBER+SUHNER RADOX® HV CABLES with EMPT technology are used especially in AUTOMOTIVE to ensure safe connections in the vehicle.Not only the Powertube connectors from TE (we already reported) are in the HUBER+SUHNER product range.Other series such as HVP 800, HVP1100, HVP1200 and the IPT-HD Power Bolt from TE are approved and available from HUBER +SUHNER.Other well-known manufacturers are now also validated and can be assembled via HUBER+SUHNER.These include manufacturers such as :Hirschmann AutomotiveRosenbergerYAZAKIPFISTERERINTERCABLEVisit us at the Battery Show 2024 in Stuttgart (booth number G-57, hall 4, June 18 - 20, 2024) so that you too can establish a secure connection to the future in the AUTOMOTIVE sector.If you have any questions or require additional information, please do not hesitate to get in touch with our contacts in the office or in the field.Contact to the sales team

PC 6: Safe PCB connector from PHOENIX CONTACT

Wed, 05 Jun 24 00:00:00 +0200

Phoenix Contact's range of PCB connectors continues to grow with the introduction of the new PC 6 PCB connectors with screw connection. These new connectors offer increased safety in accordance with IEC/UL 61800-5-1 standards and enable finger-safe PCB and device outputs without the need for inverted plug connections.The PC 6 series is available in different pole numbers from two to six and, in addition to the standard version without locking, also offers a variant with a different colored middle flange, which saves space and can be operated intuitively. The plugs have a nominal cross-section of 6 mm² with a 7.62 mm pitch and a current-carrying capacity of up to 41 A. They have the same mating face as the LPC 6 plugs with lever connection technology. They are therefore compatible with these and also enable the simple looping through of potentials in the PC 6/...-ST-BUS plug version.Overall, the PC 6 series from Phoenix Contact offers flexible connector solutions for power electronics that meet the requirements for both safety and ease of use.Main featuresGrid: 7.62 mmCurrents up to 41 AVoltages up to 1,000 V2- to 6-poleOptionally with center locking flangeExtended contact protection in accordance with IEC/UL 61800-5-1Your advantagesCompatible plug-in face with LPC 6Extended contact protection, even when unpluggedWorldwide application thanks to the familiar screw connectionIntegrated steel over-spring in the connection area ensures high contact reliabilityIf you have any questions or require additional information, please do not hesitate to contact our office staff, who will be happy to provide you with a personalized quote. Contact to the sales team

BoVersa: Innovative housing with cooling technology

Thu, 23 May 24 00:00:00 +0200

BOPLA proudly presents its latest product: BoVersa - an advanced enclosure with a visionary approach to modern design and future-oriented cooling technology.The completely new enclosure concept not only offers a modern design, but also a variety of customization options, including an innovative lighting concept. It is aesthetically pleasing and functionally versatile, whether in the hand, on the table, mounted on the wall or on a pole.Consisting of a base, functional lid and design cover, it allows a flexible combination for any application. The choice of different colors allows individual accents and adaptation to the customer's brand identity.Wherever you use electronic enclosures - BoVersa offers a unique combination of design and functionality to meet the demands of an ever-evolving world.Technical Data at a glance:Colors:black, similar to RAL 9005white, similar to RAL 9016special colors are available on requestProtection class:IP66 / 68 (1,2 m - 2 h) according to DIN EN 60529Impact resistance IK08 according to IEC 622627 joules in accordance with EN 60079-0Materials:Plastic parts: PC UL 94 V-0 (The material is flame-retardant, self-extinguishing and suitable for outdoor use; f1 listing according to UL 746 C)Seal: PU foamedMaterials in accordance with requirement set R1 or R7 according to DIN EN 45545-2 of hazard level HL3.According to the manufacturer, the BoVersa is expected to be available from quarter 03/24.You can find even more information about the new series at NEW! BoVersa – the unbelievably versatile enclosure system | English (bopla.de)If you have any further questions, please do not hesitate to get in touch with your contact person in our office or in the field.Contact to the sales team

TE Connectivity: Corcom DC power filters of the EVX series

Tue, 14 May 24 00:00:00 +0200

The automotive industry is currently in a state of upheaval. New electric vehicles are coming onto the market every day. Fast-charging stations enable shorter charging times for electric vehicles for longer journeys. Electromagnetic compatibility is becoming increasingly important here.The charging process generates high-frequency noise due to the rectification and power control processes. This can cause interference with the vehicle or the power grid.TE Corcom's EVX series enables compliance with EMC directives and is essential for a safe power supply in high voltage and high current fast chargers. Key benefits of the EVX series are: Modern design with three high voltage levels (500V, 1000V, 1500V) Four standard high attenuation levels with and without GND caps, medium and high power levels of EMI attenuation Rated current from 150A up to 1600A Designed for high power from 75kW to 2.4MW fast chargers Power options with different GND capacitors Complies with the standard for conductive charging systems for electric vehicles IEC/EN 61851-23 Complies with UL 2202 requirements for electric vehicle (EV) charging systems Compact design with small footprint for easy installation Areas of application:EV fast charging application level 3 and higher 75kW to 2.4MW Battery energy storage solutions (BESS) Solar power conversion systems Energy conversion systemsIf you have any further questions, please do not hesitate to contact your sales representative who will be happy to provide you with a personalized quote.Contact to the sales team

Flexible radio systems from SCHLEGEL

Fri, 03 May 24 00:00:00 +0200

Wireless technology has long since found its way into our everyday lives (e.g. mobile phones, navigation systems, garage openers) and enables wireless data transmission.Radio offers clear advantages in certain areas of application - including in industry. The biggest advantage of wireless solutions is their flexibility. They can be used in places where cabling is costly, impractical or even impossible. In addition, they often facilitate the operation of machines and systems and are more cost-efficient with large numbers of participants. SCHLEGEL's innovative solutions help to optimise the benefits of wireless technology in industry and offer safety and reliability in various application areas.SCHLEGEL currently has two radio systems in its programm:proboxx - equipped enclosures with radio technology1-4 control pointsInternal battery to the proboxx - manufacture-pageBattery-free wireless push-buttonCertified according to the EnOcean standardTransmitter is located in the contact elementCan be combined with various actuating elementsMatching receivers availableIf you have any questions or require additional information, please do not hesitate to contact us and we will be happy to provide you with a personalized quotation. Contact to the sales team

UL 2237 approval for binder M12

Mon, 22 Apr 24 00:00:00 +0200

binder, a leading supplier of industrial circular connectors, now offers K- and L-coded flange parts within its 824/823 series, which have been developed in accordance with the UL 2237 standard for power applications in the North American market.This includes 5-pole flange plugs and sockets that fulfil the IP68 degree of protection. The main areas of application for the M12 components with screw locking are electrical appliance and plant engineering as well as industrial control technology.UL 2237: The standard specifies guidelines for testing connectors, cables, cable glands and fuse elements, including the grounding (bonding) path current test:This specifies that the PE (Protection Earth) path must withstand a current of 190 A for connection cross-section AWG16 or a current of 300 A for AWG 14 for four seconds without interrupting. AC applications also require an abnormal overload test with 1.5 times the rated current - the fuse of the PE path must not blow - as well as an additional connection of the PE pole to the component housing.In accordance with DIN EN 61076-2-111, the K coding stands for 5-pin M12 connectors for supplying power to AC applications such as drives or frequency converters. The limit values for rated voltage and current are 630 V(AC) and 12 A.The L-coding also describes a 5-pin interface, but is specially designed for direct current applications up to 63 V(DC) and 16 A; this includes smaller motors or fieldbus devices in industrial automation.The 5-pin flange parts of the 824 and 823 series from binder with K (4+PE) and L coding (4+FE, Functional Earth) have an M12 screw lock.The connections are designed for stranded wires.The conductor cross-sections are AWG16 and AWG14. For the AC components with K-coding, the requirements of UL 2237 have been implemented with a PE connection to the threaded ring. UL 2237 certification is currently in preparation.The mechanical service life of the flange parts is specified as >100 mating cycles. The temperature limits are -40 and +85 °C (Series 824) and -40 and +105 °C (Series 823).If you have any further questions please do not hesitate to contact your sales representative who will be happy to provide you with a personalized quotation. Contact to the sales team

Precision tools from Weller Erem

Mon, 15 Apr 24 00:00:00 +0200

Weller Erem is a leading supplier of high-quality precision tools, including side and tip cutters, pliers and tweezers. Through continuous development and innovation, the products meet the requirements of modern manufacturing methods and the needs of all customers.Weller Erem® tools are characterized by their first-class Swiss quality, specially developed for use in electronics. They also offer maximum durability. With over 1 million reliable, precise opening and closing cycles, they set the industry standard for high-performance cutters. Equipped with innovative functions such as Magic Spring™, a self-locking screwdriving system and maximum opening stop technology, Weller Erem® pliers guarantee the longest operating times, highest precision and best quality worldwide.Cutter:Precise cuts with high-precision screw systemBlades are induction-hardenedErgonomically shaped handles1 million opening and closing cycles (Magic Spring™)Tweezers:Large selection Outstanding symmetrical tip alignmentErgonomically shaped handlesPliers:Precise cuts with high-precision screw systemBlades are induction-hardenedErgonomically shaped handles1 million opening and closing cycles (Magic Spring™)If you have any further questions about Weller Erem® tools, please do not hesitate to contact your sales representative who will be happy to provide you with a personalized quotation. Contact to the sales team Further information on the product can also be found on the Weller Tools website:Precision Tools | Weller Tools (weller-tools.com)Or in the brochure

High-voltage battery switch-disconnectors from TE

Wed, 27 Mar 24 00:00:00 +0100

TE Connectivity's KISSLING high voltage battery disconnect switches are specifically designed to meet the demanding requirements of the industrial and commercial transportation industry. They offer robust solutions that meet the highest safety standards by interrupting the power supply to enable safe maintenance. With different versions including 250A (without high voltage interlock) as well as 400A / 500A (with high voltage interlock), they offer a wide range of application possibilities.The high-voltage battery switches developed by TE are designed for extreme conditions and have IP67 and IP6K9K protection classes. This makes them ideal for use in heavy-duty applications such as trucks, buses, agricultural vehicles, construction machinery, forklifts, ships and other industrial vehicles.Customers benefit from the numerous advantages of these battery disconnect switches, including full integration into high-voltage wiring systems with up to 1000 V operating voltage, reliable protection against water and dust, resistance to extreme temperatures and high shock and vibration loads. They also offer priority safety through "lockout/tagout" or removable handles.If you have any questions or require additional information, please do not hesitate to contact us and we will be happy to provide you with a personalized quotation. Contact to the sales team

Huber and Suhner PGPBX solution

Wed, 20 Mar 24 00:00:00 +0100

HUBER+SUHNER's new PGPBX solution offers communications equipment manufacturers optimized performance and reliable connections.With over 20 years of RF experience, Huber & Suhner has designed the new PGPBX to offer excellent return loss up to 6 GHz. Product manager Steven Sun emphasizes the thorough development to ensure fast and secure connections, saving time and costs. The single-sided soldered design improves mass production efficiency and streamlines the PCB design process, resulting in significant savings. The solution can compensate for axial and radial misalignments of ± 1.0 mm at a working height of 10 mm.Huber + Suhner also placed great importance on ensuring that the new solution could be adapted to specific customer design requirements, including board-to-board distances and frequencies. This makes the new PGPBX solution ideal for high-volume applications.If you have any questions or require additional information, our contact persons will be happy to assist you and provide you with a personalized quote.Contact our sales team

Overmolded HDSCS connectors from CONEC

Wed, 06 Mar 24 00:00:00 +0100

Thanks to overmoulding with suitable plastic materials, CONEC HDSCS connectors can be used in harsh environments, are reliable and guarantee a long service life. You save yourself the trouble of assembling the connectors and receive them with a robust, high-quality, precisely matched PUR cable and with a perfect, watertight cable entry.Further advantages: Tamper-proof 8-pin type C connector (standardized) for many applications Individual routing from the cable end thanks to a selection of different cable lengths (standard 2, 5, 10 m) IP67 protection from the housing to the cable Areas of application: Agricultural technology Municipal technology vehicles Off-road vehicle sector Commercial vehicles For further questions, your contacts from the internal sales department are at your disposal and will be happy to provide you with a personalized quote. Contact to the sales team

RADOX HV cabel with HIVONEX PowerTube

Tue, 20 Feb 24 00:00:00 +0100

Customized TE PowerTube pigtails with Huber and Suhner Radox HV cables available from a quantity of one.In order to manufacture and offer highly reliable high-voltage (HV) cable assembly solutions, HUBER+SUHNER has invested in electromagnetic pulse technology (EMPT) in addition to the established crimping technology. In collaboration with TE and HUBER+SUHNER, an innovative HV cable assembly solution has been developed. The PowerTube HV connectors in combination with the shielded RADOX® HV cables, assembled using the EMPT solution, ensure reliable, robust and durable electrical connections throughout the vehicle. This solution is available in two series - PowerTube 1000 (HVP-HD 100) and PowerTube 1400 (HVP-HD 1400). You can obtain these assemblies from us from just one piece at a manageable cost.With a robust design and braided shielding that efficiently handles high current loads, RADOX® HV cables offer strong resistance to various potential safety risks. They have ECE R118 approval for flame retardant propagation and ADR approval for high abrasion resistance. These cables can operate in a wide temperature range from -40 °C to 150 °C / 3000 hours, including handling peaks of up to 250 °C. This ensures reliable durability even in demanding applications.The robust properties of the RADOX® HV cables in combination with the TE connector design are crucial for high performance in assemblies and connections. By implementing EMPT technology, HUBER+SUHNER has created in-house assembly capabilities that make it possible to quickly meet market requirements for prototypes while supporting small series deliveries. Although the part numbers for pigtails are defined by standard lengths (1 m, 3 m and 5 m), customized lengths can easily be generated. By combining the TE connector and RADOX® HV cable, vibrations at motor level are a thing of the past, as a circular 360° shielding ensures high electromagnetic compatibility (EMC). Depending on the operating temperature, the TE PowerTube series is capable of handling large electrical loads up to 580 A continuous current and 1000 V as well as several wire sizes between 35 and 150 mm².Do you have any questions? Please do not hesitate to contact us for further information.Contact to the sales team

HIVONEX PowerTube with RADOX HV cable

Tue, 20 Feb 24 00:00:00 +0100

Angled - Compact - binder Series 707

Fri, 09 Feb 24 00:00:00 +0100

binder, introduces the angled flange parts of the M5 variant. Space is a crucial issue, especially in miniaturization development and design.The 3-pin or 4-pin connectors in the 707 series are equipped with dip solder contacts for PCB mounting, and a screw lock ensures that the connection is secure. When plugged in and locked, the interface complies with protection class IP68.Drones, cobots, measuring systems - the need for compact interfaces is growing with the expansion of these markets. In these and related fields of application, highly specialized, individually tailored products are being designed. Maximum reliability is a core aspect of development. Customer requirements for connection technology primarily address flexibility, robustness and consistently high quality.The angled M5 flange parts offer special design features such as slightly splayed positioning pins for anti-twist protection and a deeper O-ring for improved sealing. The component width is just 7.5 mm, which makes it easier to use in confined spaces.Guido Werner, Product Manager at binder, is convinced of the potential of the small circular connector design. He emphasizes the superior quality of "Made in Germany" and highlights the robustness of the 707 series.The 707 series right-angle flange connectors are specified for 60 V rated voltage and 1 A current. They withstand surge voltages of up to 1.5 kV and are protected against dust and permanent immersion (1.8 bar for 24 hours) in accordance with IP68. Their operating temperature is between -25 °C and +85 °C, and they achieve a mechanical service life of more than 100 mating cycles.For further questions, your contacts from the internal sales department are at your disposal and will be happy to provide you with a personalized quote.Contact to the sales team

INS 265 design kit from PTR Hartmann

Tue, 30 Jan 24 00:00:00 +0100

PTR Hartmann is a leading manufacturer of connection technology and terminal blocks for industrial applications. With the new product INS265 Designkit, the company offers a housing for DIN rails that is individually configurable and meets the highest standards of quality and reliability.The DIN rail enclosure INS265 is available in the standard width of 6.2 mm. The width can be individually expanded up to 15.0 mm. The corresponding circuit board is custom-designed and soldered to the 6 contact points of the housing. This ensures optimal connection of the electrical components and reliable transmission. If no connection is desired at one or more of the 6 connection points, the openings are closed with blind plugs.Thanks to PTR Hartmann's engineering, the INS265 DIN rail enclosure is not only high-quality but also particularly robust and durable. Therefore, it is ideally suited for use in demanding environments and applications where the highest reliability is required.Technical details at a glance: DIN rail enclosure with housing widths ranging from 6.2 to 15.0 mm Up to 6 connection options Push-In connection Customizable circuit boards housing options: Separation knife LED prism Grounding foot Actuator for slide switches Universal opening for, e.g., USB-C connection Opening for rotary switches Side housing openings Laser marking on the conductor entries Laser marking on the side walls Various colors As accessories, insulated bridges, as well as labeling clips in different colors, are available.Download BrochureProduct details & product konfigurator:For further questions, your contacts from the internal sales department are at your disposal and will be happy to provide you with a personalized quote.Contact to the sales team

TE Connectivity: High Density BNC Connectors

Thu, 18 Jan 24 00:00:00 +0100

New: High Density BNC Connectors for Maximum ConnectivityTE Connectivity is once again setting the standard in the world of connectivity technology with the introduction of its ground-breaking High Density BNC connectors. These little wonders are not only smaller than traditional BNC connectors, but also allow up to four times the number of connections in the same footprint. The compact design of these connectors has been specially developed to save space while offering maximum performance. In large video systems, broadcast systems and video signal applications, they offer a flexible solution for demanding connectivity requirements.A special highlight is the customized locking/unlocking tool (2446195-1), with which the cable connectors can be effortlessly connected and disconnected from the and disconnected, even in very confined spaces. The bayonet lock ensures a secure connection and the innovative tool also makes it easier to also makes it easier to lock the plug connections.Product features:Versions with 50 Ohm and 75 Ohm impedance availableup to 4 times the cabinet density compared to standard BNC connectorssuitable for conventional broadcast cables - 20% lighter than standard BNC connectors51% smaller than standard BNC connectors and 39% smaller than mini BNC connectors.bayonet lock with quarter turn and locking function-faster and easier installation and removal of connectors in limited spaceoptimized for 12G-SDI broadcast video solutionsdeveloped for the CoaXPress 2.0 and SMPTE ST 2082 standardsfrequency range of the connector DC-12 GHzIP67 waterproof chassis connector availableLandingpage TEWhitepaperProduct overviewIf you have any further questions, please do not hesitate to contact your sales team who will be happy to provide you with a personalized quotation.Contact to the sales team

HUBER+SUHNER Radox OFL now available

Fri, 22 Dec 23 00:00:00 +0100

Whether offshore, onshore, oil & gas, petrochemical or chemical refineries, as well as for applications that require fire and flame retardant properties, the new OFL series sets new standards.The OFL family was developed specifically for offshore and onshore applications to provide the best possible protection against external adversities. A weight and size reduction of up to 60% with a small bending radius (3-4 x D for fixed installation and 5-6 x D for free movement) also gives the OFL series advantages on the market.A wide temperature range from -50 degrees to +130 degrees, high mechanical and abrasion resistance, weather and ozone resistance, as well as moderate resistance to sludge, oil, acid, and fuels, are strong selling points for the new series.The new series is available now.If you have any questions or require additional information, our office staff will be happy to assist you and provide you with a personalized quote.Contact our sales team

Industrial communication from Phoenix Contact

Tue, 19 Dec 23 00:00:00 +0100

In the world of industrial automation, reliable communication solutions are crucial to ensure smooth operation, maximum efficiency and safety. Phoenix Contact's comprehensive portfolio of industrial communication products covers various key aspects, from robust Ethernet switches to advanced industrial routers.Ensuring reliable data transmission from the field to the control level is at the heart of industrial communication solutions. With modern technologies such as Industrial Ethernet and wireless technologies, Phoenix Contact offers integrated solutions that increase the availability and security of networked systems. Their network protocols and fieldbus systems, including PROFINET, OPC UA, PROFIBUS and INTERBUS, enable efficient communication between different devices.Industrial Ethernet Switches:The Industrial Ethernet switches offer flexible solutions for setting up high-performance networks in demanding environments. With Gigabit options, Power over Ethernet (PoE), IEC 61850 certification and DIN rail mounting, they enable versatile networking and simple segmentation of industrial networks. The robust design ensures reliable performance under extreme conditions.Product overviewIndustrial routers for remote maintenance and cyber security:The industrial routers enable the secure connection of different networks via cable or mobile radio for remote maintenance and security purposes. With integrated VPN and firewall functions, mGuard protection against cyber attacks and mobile radio support (2G/3G/4G/5G), they offer comprehensive solutions for secure and efficient network connectivity. The robust design and remote management tools ensure reliability and easy maintenance.Product overviewIf you have any further questions, please do not hesitate to contact your sales team who will be happy to provide you with a personalized quotation.Contact to the sales team

Börsig is official distributor for GEORG SCHLEGEL products

Wed, 13 Dec 23 00:00:00 +0100

GEORG SCHLEGEL GmbH & Co. KG is a leading supplier of control devices for controlling machines or operating devices. For more than 75 years, SCHLEGEL has been developing, designing and producing emergency stop switches, enclosures, control panels, pushbuttons and switches as well as RFID systems, modular bus systems, panel jacks and terminal blocks for many industries. SCHLEGEL products, all exclusively "Made in Germany", are characterized by their high quality and award-winning design.The electronic distributor Börsig from Neckarsulm now has the official distribution rights for the high-quality, robust and reliable product solutions from SCHLEGEL. Stefan Börsig, Managing Director of Börsig GmbH, comments: "Börsig is a partner of market-leading manufacturers. We remain true to this line with the Schlegel brand."SCHLEGEL products are used in a wide range of industries worldwide, particularly in the machine tool sector, in medical technology, in construction machinery and logistics as well as in shipbuilding and vehicle construction.SCHLEGEL and Börsig As an electronics distributor for electromechanical components, the family-owned company Börsig has been offering connectors, relays, switches, cables and other electrical components from premium manufacturers since 1969. Authorization as an official distributor for SCHLEGEL products demonstrates the manufacturer's confidence in Börsig as a sales partner. The products are an ideal addition to the portfolio, enabling Börsig to offer its customers even more opportunities for personal and technical advice. Wolfgang Zoll, Sales Manager at SCHLEGEL: "We are looking forward to the cooperation with Börsig, which will further increase our presence on the markets."What makes SCHLEGEL products stand outWith over 8000 standard products, SCHLEGEL offers variants for all common connection technologies, installation depths and labeling types for its control devices, panel jacks and systems. SCHLEGEL products are designed for a long service life and many are also designed for use in harsh working environments.The SCHLEGEL product world is coordinated with each other, and elements of the assemblies can be combined with each other in a modular system. SCHLEGEL also works with customers to develop individual solutions for specific requirements.Nice & good: SCHLEGEL pays particular attention to the design of its products. Over 100 national and international awards confirm the company's high level of design expertise. "Good design combines form and functionality in an outstanding way, without compromising on the technical requirements of the target application," emphasizes Wolfgang Zoll.The certified management system at SCHLEGEL guarantees quality and traceability. Consistent optimization of production processes and the use of new technologies ensure consistently high manufacturing accuracy.Advantages of BörsigBörsig has invested in an extensive stock package of the SCHLEGEL portfolio to ensure reliable availability and short delivery times. In addition, the products can be ordered from Börsig outside of packaging units and without a minimum quantity surcharge.SCHLEGEL information at BörsigContact to the sales team

HARTING Han® Q Hybrid: for power, signal and data

Fri, 08 Dec 23 00:00:00 +0100

Are you looking for a compact, powerful and versatile connector for your machinery, robotics, interlogistics or automation? Then the HARTING Han® Q Hybrid insert is just right for you.This insert is an extension of the Han®3A portfolio and is therefore compatible with all size 3A housings. HARTING Han 3a connectors offer robust construction and protection against environmental influences in industrial environments. The flexible configuration adapts to different applications, while compliance with industry standards ensures reliable integration.HARTING Han® Q Hybrid is an innovative connector solution characterized by its versatility and performance. This hybrid connector system combines data, signals and power via a single connection. This saves you time and money.Use for crimp contacts: 4+PEx Han E®: 20A, 600 V 4x Han D®: 10 A, 250 V 4x M12 for data element: Cat. 5, 2 A, 32 V 4 coding options Download data sheetIf you have any further questions about the HARTING Han® Q Hybrid, please do not hesitate to contact your sales team who will be happy to provide you with a personalized quotation.Contact to the sales team

Börsig tip: Glenair‘s earth bond system

Thu, 30 Nov 23 00:00:00 +0100

In our informative video, Mr. Yumruk presents the effortless application of the earth bond system in conjunction with the "3 in 1" PMTXX hand pliers.Glenair's earth bond system offers numerous advantages: Effective discharge of electrical currents into the ground or soil. Uncomplicated application without additional work steps on the structures, such as welding, pressing together, cleaning or other surface treatments. Installation possible during any production phase. A secure conductive connection is always guaranteed, as the inner borehole surface is contacted and not the surface of the sheet metal. The bonds can be used in various places, even on uneven and curved surfaces. The PMTXX hand tool is characterized by the following features: Processing of different sizes (M6, M8 and M10). Easy adjustment thanks to matching color codes. Automatic release after reaching the set tensile force, recognizable by an audible click sound. Single-handed operation for maximum ease of use. With the combination of the innovative earth bond system and the practical PMTXX hand pliers, processing grounding expansion bolts becomes a straightforward task.See for yourself how Mr. Yumruk demonstrates how easy and efficient this solution is in our video. If you need more information or have any questions, please do not hesitate to contact us.Contact to the sales team

Power and Signal - PBC15 series from binder

Mon, 06 Nov 23 00:00:00 +0100

Power Bayonet Connector PBC15.binder introduces a compact and robust circular connector with M15 thread ,which closes the gap between the common M12 and M23 connectors and is ideal for supplying three-phase motors and frequency converters. With three voltage contacts for phase supply, two signal connections and one PE protective contact, the PBC15 complies with the DIN EN IEC 61076-2-116 standard.With ratings of 630 V and 16 A, this connector is ideal for supplying power to small to medium-sized drives. The shieldable variants are suitable for use in electromagnetically stressed environments, for example in intralogistics, factory and process automation as well as in mechanical engineering.Despite its compact design, the PBC15 allows easy mounting thanks to screw terminals. A special design ensures a secure connection of the PE pin to the housing. This powerful and user-friendly connector meets the requirements for electrical connectivity typically used for industrial power supply and power applications and complies with the DIN EN IEC 61076-2-116 standard.For the time being, binder offers cable sockets and plugs in unshielded and shielded versions.For further questions, your contact persons from the inside sales department will be happy to assist you and create your personal offer.Contact to the sales team

HUBER+SUHNER – Lead-free SMA connectors

Tue, 24 Oct 23 00:00:00 +0200

HUBER+SUHNER presents an environmentally friendly alternative for its high frequency (HF) SMA connectors. These environmentally friendly connectors are now available through the company's distribution network.With impressive expertise built over decades in connectivity, HUBER+SUHNER's SMA interface is valued worldwide and used in a variety of industries, including communications, defence, aerospace and test and measurement, as well as other industrial applications. The lead-free connector solution has been developed to rival conventional connectors in terms of both electrical performance and mechanical properties. This extends in particular to the connection strength and the precise fit. The SMA connectors impress with an impressively wide frequency range of up to 18 GHz, excellent return loss and high mechanical robustness.Lead is usually added to alloys to improve their machinability, serves as a lubricant and machining agent. If improperly handled and released, lead can harm both human health and the environment. Legal regulations already exist in Europe to restrict the use and release of lead in products and into the environment, including the EU's RoHS Directive (2011/65/EU), which focuses on hazardous substances in electronic components, and the EU's REACH Regulation (EC) No 1907/2006, which regulates the registration, evaluation, authorisation and restriction of chemical substances. The latter has included lead as a "Substance of Very High Concern" (SVHC).By introducing this lead-free SMA connection solution, HUBER+SUHNER demonstrates its pioneering role and meets the changing regulations in every respect.As a reliable technology partner, Huber and Suhner already offers sustainable solutions for various industries. These solutions focus on high performance, reliability and long-life products, while ensuring the health and safety of employees, customers and the environment.For further questions, your contact persons from the inside sales department will be happy to assist you and create your personal offer.Contact to the sales team

New DC connectors from Phoenix Contact

Wed, 18 Oct 23 00:00:00 +0200

Phoenix Contact has launched a brand new range of ArcZero series DC connectors that provide secure connection and disconnection under load. These innovative connectors provide a reliable and efficient solution to your DC connection needs. Whether you are in industrial, renewable energy or other applications, these new products will exceed your expectations.Learn more about the new DC connectors from Phoenix Contact at the following link: Link to product pageHighlights of the new DC connectors: Diversity: The connectors are suitable for a wide range of applications, from photovoltaic systems to building automation. Reliability: Phoenix Contact is known for its high-quality products that stand the test of time. These connectors are no exception. Efficiency: Phoenix Contact's DC connectors are designed for easy installation and maintenance, resulting in time and cost savings. Sustainability: These connectors are environmentally friendly and support green energy generation and use. Fetures in Overview: Nominal cross section: 1,5 mm² … 6mm² Nominal tension: 400 V / 800 V Nominal voltage: 20 A Protection classes: IP66 / IP 68 (24 h / 2 m) / IP69 / IK08 International approvals: UL 2237 (8 A only), VDE (DIN EN 61984, 60669-2-1) Plugging cycles: >1.000 We invite you to visit the manufacturer's product page for more information and to discover the technical specifications of the DC connectors.If you have any questions or would like additional information, please do not hesitate to contact our inside sales team who will be happy to provide you with your personal quote.Contact to indoor serviceContact field service

From the cable assemblies for municipal technology

Wed, 27 Sep 23 00:00:00 +0200

In-house engineering by BörsigDue to the discontinuation of a standard component that the customer had in use, the specialists at Börsig were approached to find a solution at short notice that would meet the technical requirements of the application in a municipal vehicle.In order not to disrupt the customer's assembly processes, a plug-and-play solution was required. For this purpose, Börsig had metal support plates laser-cut and powder-coated for the project. The pushbutton switches selected by the customer and laser-engraved according to his requirements were also to be sealed at the back. In a two-stage process and with the aid of a project-specific plastic sleeve, our employees cast the C&K products in a capillary-proof manner prior to installation.The technically upgraded pushbutton switches were then installed and fitted for the customer with the appropriate SUPERSEAL 1.5 connectors from TE Connectivity.As usual, a 100% inspection including logging was carried out by the experienced colleagues of our production at the Neckarsulm site to ensure the supply of our customer with 1A goods.To the used products:C&K - Pushbutton switch series ATPS22The ATPS22 series pushbutton switches offer outstanding performance against vandalism and are corrosion resistant. The pushbutton switches are also dust-water resistant with IP67 protection. With 1,000,000 switching cycles and their rugged design, they are the ideal choice for this project in terms of durability and robustness as well.TE Connectivity - SUPERSEAL 1.5 series connectorsThe series is also characterized by a high degree of sealing (IP 67), which is achieved via seals in the mating area, as well as via single wire seals on the back. Developed for the demanding environments in vehicle construction and for easy assembly, the 3-pole connector found its optimal field of application here.If we have aroused your interest in assemblies from Börsig, which are characterized by quality, competence and experience in the overall process, please feel free to contact us.

Trelleborg Cable Gland Plates MH- & FL-series

Wed, 06 Sep 23 00:00:00 +0200

Trelleborg has a wide product portfolio of cable entry systems in the Cable Entry Solutions division.Trelleborg cable entry plates are metal or plastic-reinforced cable entry systems that enable quick and easy installation of multiple cables, wires or hoses without connectors. In confined spaces, these can be safely installed in control cabinets, housings or machines.Whether in plant engineering, the energy sector, control panels and control cabinets - whatever the field of activity, Trelleborg's cable entry plates are an ideal protection for your cables.The FL series, unlike the MH series, is further reinforced with a galvanized steel metal insert.With the MH- and the FL-series Trelleborg Cable Entry Solutions has a wide range of cable entry plates that meet many requirements.Your advantages at a glance: Easy assembly High line density Hygienic design due to smooth surfaces Suitable for outdoor and indoor applications Double sealing allows IP protection despite bent cables Here you will find the technical details and an overview of the products:MH-SerieFL-SerieSelection assistanceIf you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

Angled Conectors: binder Series NCC 720 and 770

Tue, 29 Aug 23 00:00:00 +0200

Angled plastic connectors with snap-in and bayonet locking are structurally challenging as they are prone to mishandling. binder has developed a safe and rugged field-attachable angled version for the miniature 720 series, suitable for applications with tight mounting conditions. The miniature 770 NCC (Not Connected Closed) series is now also available in angled form and has variable cable outlet orientation.These particularly compact angled connectors are used in a variety of appliance, building and system applications. The angled versions of the 720/770 series offer a reliable and space-saving alternative to the straight versions, especially where secure electrical connections need to be made in confined spaces.The 720 series mechanically locks the electrical connection by engaging the snap hooks in a specific opening. But if the connector is pulled off at an angle to its axis rather than axially, this can destroy the plastic snap hooks. To avoid this error in the application, the developers at binder have inserted an angle between the contact body and the angle housing. Even if an application of force occurs at an angle to the connection axis, the snap hooks are protected.Thanks to the additional threaded ring, the following expedient claims can be managed: Based on this idea, Binder can also offer the angled version of the 770 series with numerous identical parts. The user has the possibility to determine the direction of the cable outlet himself, because the contact body can be rotated in steps of 90 degrees. There are usually difficulties when connecting cables to enclosures with a 90 degree angle. It is often difficult to bend the cables 90 degrees. Therefore, a 100-degree angle has been used for the new enclosures, which makes it easier to install the cables.The series is designed for voltages from 60 V to 250 V and currents from 2 A to 7 A. For the three- to twelve-pole interfaces, the cable connection is made by soldering. They meet IP67 protection (mated) and can withstand over 500 mating cycles.NCC right-angle connectors can be used in compact hand-held operating devices, medical devices for home use with patients, and laboratory measuring instruments that need to be installed in a particularly space-saving manner, such as in close proximity to a wall. Solder connections are also available on the 8-pin interfaces. The rated voltage and current are 175 V and 2 A. Thanks to binder's NCC technology, flange sockets achieve IP67 protection not only when mated, but also when unmated, which lasts for more than 5,000 mating cycles.If you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

Board-to-Board connector FR 1,27 up to 28 Gbit/s

Mon, 21 Aug 23 00:00:00 +0200

Phoenix Contact is expanding its portfolio with the Finepitch FR series of board-to-board connectors. With a pitch of 1.27 mm, these innovative connectors achieve impressive data rates of up to 28 GBit/s, which represents a significant increase in performance.The success of this series lies in its intelligent component design and quality-driven manufacturing, which ensure high data integrity and nominal impedance in customer applications.The flexibility of the Finepitch FR series is demonstrated by the scalability of the board-to-board and wire-to-board connectors for even pole counts from 6 to 100. Mezzanine and coplanar applications are feasible as well as mother-daughter connections.The sophisticated contact design allows flexible PCB alignment and ensures compatibility with the previous FP 1.27 series as well as other market competitors.The gold-plated contact points ensure long-term stable signal transmission with currents of up to 2.3 A, which further increases the reliability of data transmission.If you have any further questions about the Finepitch FR from Phoenix Contact, please do not hesitate to get in touch with your contact person in the internal sales department who will be happy to prepare your personal offer.Contact to the sales teamAdditional information:Product informationProduct overview

Versatile M23 circular connectors

Wed, 16 Aug 23 00:00:00 +0200

The M23 circular connectors - The reliable and robust solution for high performance requirementsDesigned to meet high demands, the high-quality M23 circular connectors offer an ideal and safe solution for demanding industries such as industrial automation, transportation, energy and renewable energy, as well as in measurement and test engineering. The connectors prove their performance even in the most extreme environments and conditions.Learn more about our manufacturers' versatile technology and product range on the M23 circular connectors landingpage.Our sales teams are ready to answer your questions and discuss individual solutions for your specific requirements.

Börsig Tip: The QR Codes from binder

Tue, 25 Jul 23 00:00:00 +0200

Binder prints a QR code on each product package. When you scan it, you will be taken to a website where you can find all the useful information for the product.In the video, our product manager Sven Birner explains what information is hidden behind the QR code.

WXsmart soldering station from Weller Tools

Thu, 20 Jul 23 00:00:00 +0200

Weller Tools is a renowned manufacturer of high-quality soldering tools and soldering stations. With decades of experience and innovative technology, Weller Tools offers solutions for precise soldering in various industries. The products stand for quality, reliability and efficiency.WXsmart is an advanced combination hand soldering platform that offers maximum connectivity and traceability. It acts as the brain of the workbench by combining various soldering applications into one station. With its smart soldering tips and tools, it enables Smart Soldering 4.0, saving time, cost and space. The various connection options, including WLAN or LAN, ensure easy access at all times. In addition, the system offers high security through built-in cybersecurity and has maximum connectivity with IoT standards for easy traceability and remote access via mobile devices.Overall, WXsmart offers an innovative solution for hand soldering that covers all aspects of the soldering process and provides users with maximum control, intelligence, security and connectivity. With its modular design and ability to integrate with existing systems, WXsmart ensures a high level of investment security. It is ideal for different users in different industries and offers numerous tools and features to meet individual requirements.Advantages: maximum connectivity built-in cybersecurity Smart Soldering 4.0 Total Process Control (TPC) These benefits make WXsmart a future-proof solution for many industries such as electronics, medical device manufacturing, aerospace, automotive, LED and solar technology.If you have any further questions about WXsmart from Weller Tools, please do not hesitate to contact your sales representative who will be happy to prepare your personal offer.Contact to the sales teamMore information about the product can also be found on the Weller Tools website

ERNI products from TE Connectivity

Thu, 13 Jul 23 00:00:00 +0200

We now carry an extensive stock of ERNI products from TE Connectivity. This gives you access to a wide range of high-quality components and connectors from ERNI.ERNI, a brand of TE Connectivity, is known for its innovative solutions in the field of electronic connectivity. The product range includes connectors, PCB connectors, board-to-board connectors, cable connectors and much more. These are characterised by their high quality, reliability and durability making them the preferred choice for engineers, electronics manufacturers and users worldwide.With cross-industry applications, ERNI products open up opportunities in various industries. Whether in the automotive sector, telecommunications, industrial automation or medical technology. Their high quality, adaptability and compatibility have established them as the preferred choice to meet the specific requirements and standards of these industries.As an authorised distributor, we offer the complete range. By working closely with TE Connectivity, we can ensure that you always have access to the latest and most innovative ERNI products with us. Our stock is regularly updated to meet your increasing demands and needs.Advantages once again at a glance: High quality Reliability and durability Wide product portfolio Innovative solutions Compatibility with common standards Tailor-made solutions according to customer requirements You can find the product selection guide under Guide to the ERNI Product Selection Tool.If you have any further questions about ERNI products, please do not hesitate to contact your contact person in the office who will be pleased to prepare your personal offer.Contact to the sales team

EU agreement on uniform USB-C ports

Tue, 04 Jul 23 00:00:00 +0200

The European Union has decided that uniform USB-C connections will serve as the standard for numerous devices in the future. This is to ensure that consumers can use a safe and uniform method for charging and transferring data. The decision also includes regulations for the maximum current flow, cable diameter and positioning of the connectors to ensure compatibility between USB-C connectors from different manufacturers and devices.You can find more information about the right products for your application here

The new HPC charging cables of the CHARX family

Tue, 20 Jun 23 00:00:00 +0200

In the field of electromobility, Phoenix Contact offers comprehensive solutions for charging electric vehicles. The product portfolio includes charging plugs, charging cables, charging stations and the associated accessories. The products are characterized by high quality, reliability, and safety and meet the common international standards.The new CHARX connect professional family from Phoenix Contact revolutionizes high power charging (HPC) with sustained 375 kW without the need for cooling. The CCS charging cables feature an increased conductor cross-section of 4 x 50 mm² and enable the safe operation of HPC charging stations at temperatures of up to 40 °C with 375 A. Even for short periods, significantly higher charging currents are possible in boost mode, resulting in particularly short charging times and making the charging of electric vehicles at e-charging stations suitable for everyday use.The uncooled charging cables not only offer impressive performance, but also intelligent functions and maximum safety. They are prepared for four-wire measurement technology to enable charging processes to be accounted for securely and in compliance with calibration regulations. By measuring the power dissipation in the charging cable, the transmitted energy can be accurately recorded.The safety of the CCS charging plug is further improved by an innovative two-chamber sealing system. The spatial separation of the two power contacts DC+ and DC- reliably prevents short circuits from occurring. In addition, separately available repair kits enable fast and cost-effective maintenance, during which the mating face including the power contacts can be replaced without having to replace the entire charging cable.Advantages at a glance: Without liquid cooling Preparation four-wire measuring technology High safety due to two-chamber sealing system Robust design Fast and inexpensive maintenance For further questions on the topic of High Power Charging (HPC) or generally on the topic of E-mobility from Phoenix Contact, your contact persons from the inside sales department will be happy to assist you and prepare your personal offer.Contact to the sales teamProduct overviewOverview CHARX products

DT Highspeed Sealed Connector

Wed, 07 Jun 23 00:00:00 +0200

TE Connectivity's DT Highspeed Sealed Connectors are designed specifically for use in industrial and commercial vehicle applications.The sealed connectors with transmission speeds of 100 Mbit/s to 1 Gbit/s and a range of 15 to 40 meters offer outstanding signal integrity. This makes them ideal for use in large vehicles.In particular, they are suitable for use in applications requiring additional cameras, sensors, advanced network architectures, advanced information and display capabilities, and high-bandwidth data transmission lines.Product features: Transmission speeds from 100 Mbps up to 1 Gbps. Range from 15 up to 40 meters Jacket shielded twisted pair cable (STP) Cable size 0.35 - 0.50 mm2 (22 - 20 AWG) IP67, IP69K and USCAR2 sealing performance Operating temperature -40°C to 125°C Connections cable-to-cable or cable-to-board Terminal system DEUTSCH size 20 contacts Existing crimping tools Vibration Vibration class V1 Flammability UL 94 V-0 IEEE 802.3bw standard Application examples in the vehicle (cabin & chassis): Camera Data transmission lines Radar / Lidar Displays Gateway / switch Sealed control You can also find more information at:Sealed Ethernet Connector for up to 1 Gbps Product Overview:List of Sealed Ethernet Connector for up to 1 Gbit/s Models & Products | TE ConnectivityIf you have any further questions about DT Highspeed Sealed Connectors, please do not hesitate to contact your sales representative who will be happy to prepare your personal offer.Contact to the sales team

Managed Single Pair Ethernet-Switch

Wed, 24 May 23 00:00:00 +0200

With Single Pair Ethernet (SPE), it is possible to transmit Ethernet via only one pair of wires, thus ensuring a cost-effective and space-saving connection of sensors.Thanks to the new Single Pair Ethernet switch from Phoenix Contact, it is now also possible to integrate modern sensors and field devices directly into the Ethernet network. The FL Switch 2303-8SP1 represents the first switch from Phoenix Contact to support modern sensors and terminal devices with single pair Ethernet interface. Using the 10Base-T1L standard, which is universally applicable and allows distances of up to 1,000 meters, the managed switch offers single pair Ethernet (SPE) on eight ports.The connected devices can optionally be supplied with power via the two-wire cable using the PoDL (Power over Data Line) standard and 24 V DC Power Class 11. This allows sensors in production, infrastructure and building automation to be easily integrated directly into the Ethernet network without gateways.Three classic Ethernet ports with 100/1000 Mbps are available to connect the overlaid network in star, ring or line topologies. The managed switch is particularly suitable for automation protocols such as Profinet and offers network redundancy as well as relevant security features.Advantages at a glance: The switch can be used universally with all Ethernet and IP-based protocols long distances up to 1000 meters are possible uncomplicated installation and thus low effort direct Ethernet/PROFINET integration If you have any further questions about the Managed Single Pair Ethernet switch from Phoenix Contact, please do not hesitate to contact your Phoenix Contact sales representative who will be happy to provide you with a personal quotation.Contact to the sales teamFurther information about the product can also be found on the Phoenix Contact website:Press release:First managed switches for Single Pair Ethernet | PHOENIX CONTACTProduct overview:FL SWITCH 2303-8SP1 - Industrial Ethernet Switch - 1278397 | Phoenix Contact

Bocube – versatile, halogen-free enclosures

Tue, 16 May 23 00:00:00 +0200

The Bocube electronic enclosures from Bopla convince with a wide range of sizes and combination options and can be used without any problems in the fields of railroad engineering, mechanical engineering, automotive engineering, medical and building services engineering, among others.The enclosures are available in ABS (single color, gray) and PC UL 94 V0 (single color, gray or with a crystal-clear lid). The matching hinge latches are available in six different color variants. The hinges can be easily clamped in place and thus serve as a closure for the enclosure. Using a screwdriver, the two hinge locks can be easily opened again to completely remove the lid afterwards. Alternatively, only one of the two sides can be opened. In this way, the closed side is automatically used as a hinge and the lid can be opened to the respective side.The housings comply with the following specifications, among others: Railroad standard DIN EN 45545 UV protection Almost all variants UL listed Flame resistance ULV94 V-0 IP protection classes IP66 or IP68 according to IEC/EN 60529 Halogen-free Easily recyclable, since made of single-grade plastic Housing colors light gray or graphite gray Special colors possible on request Suitable mounting material available You can find even more information about the products atBocube | BOPLAOr in the video:https://youtu.be/8cvUxL9tM7kIf you have any further questions about the halogen-free Bocube electronic enclosures from Bopla, please do not hesitate to get in touch with your contact person in the office who will be pleased to prepare your personal offer.Contact to the sales team

Protective Caps for CPC Connectors

Wed, 26 Apr 23 00:00:00 +0200

Bring color into the game.TE Connectivity has developed special disposable protective caps for its CPC series, which provide perfect protection against contamination during storage and transportation. These protective caps are highly temperature-resistant and can withstand temperatures of over 80°C without any problems.The cost-effective protective caps can be fitted onto all CPC plugs and sockets in an unconnected state to keep your connections and cables safe and protected. Additionally, they provide the option to securely fasten your cable assemblies.Various colors such as orange, black, red, and yellow are available to allow for quick and easy identification of the connections. With the disposable protective caps from TE Connectivity, your connections and cables are always optimally protected and securely stored.If you have any further questions about the products, please do not hesitate to contact your contact person in the internal sales department who will be happy to prepare your personal offer.Contact to the sales team

New crimp-based connector series CONNEXIS

Mon, 17 Apr 23 00:00:00 +0200

Phoenix Contact offers a wide range of reliable PCB terminal blocks and connectors. The wide-ranging product portfolio covers almost all applications.The introduction of the new CONNEXIS series of crimp-based wire-to-board connectors has optimized automated production. This ensures fast and, above all, precise connections.The product range includes connectors and base strips in horizontal or vertical configurations as well as panel feed-throughs. These can be used for both device connections and flying leads. The crimp contacts are available for conductors with AWG 28 to AWG 14. The connectors in the D21, D31 and D32 portfolio have pitch dimensions of 2.5 mm, 3.81 mm and 5.08 mm, respectively, making them suitable for various signal and low-voltage supplies.To avoid mating errors, Phoenix Contact offers these connectors and base strips coded. In addition to X and Y coding, Z coding is also available. Optical marking of the connectors is also possible. Customers have the option of choosing from a variety of individual imprints.All advantages at a glance: Error-free plugging with permanently integrated coding Fast and safe assembly due to individual printing Simple, time-saving production Expandable application due to different contact surfaces Link to product overviewIf you have any further questions about the Connexis products from Phoenix Contact, please do not hesitate to contact your contact person in the internal sales department who will be happy to prepare your personal offer.Contact to the sales team

Change in metal quotation - switch to Westmetall

Tue, 21 Mar 23 00:00:00 +0100

Dear business partners,from 01.04.2023 Börsig GmbH will, due to drastic increase of the cathode surcharge and the increased transport costs of our suppliers, switch to the copper rate of Westmetall.The cathode surcharge is already included with Westmetall. We will only add 1% for administrative costs.The new calculation will come into effect as of 01.04.2023.Your current prices will remain valid.Thank you for your understanding.If you have any questions, please do not hesitate to contact us.Your Börsig - TeamContact to the sales team

Provertha M12 adapter with X to D and D to X coding

Tue, 07 Mar 23 00:00:00 +0100

Die PROVERTHA Cables & Solutions GmbH as a developer and manufacturer in the field of railroad technology, industrial automation, industrial communication, industrial electronics and in the automotive industry has released the M12 adapter with X to D and D to X coding, a compact adapter solution to enable the connection of two worlds into one functioning system.Pin X8-coded / Socket D4-codedConnection between Gigabit devices (Cat6A) and 100Mbit cabling (Cat5/5e)Pin D4 coded / Socket X8 codedConnection between 100Mbit devices (Cat5/5e) and Gigabit cabling (Cat6A)Technical data: ≥ 250 mating cycles -40°C to +105°C IP67 (when locked) M12 locking nut with combination knurl Your advantages at a glance: Robust and compact adapter solution Small outer diameter Full metal housing enables effective shielding Cost and time saving Connection of two worlds through Plug&Play If you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

SDE CRIMP hand tool from TE Connectivity (TE)

Thu, 09 Feb 23 00:00:00 +0100

TE Connectivity has released the SDE CRIMP tool system, a new and improved hand tool. In contrast to its predecessor system, this one impresses with increased flexibility and better performance. The new frame is also more ergonomically comfortable to grip and therefore offers greater ease of use, efficiency and quality during the crimping process.The frame (PN 2362810-1) of the crimping tool can be ordered individually. Likewise, the dies are available individually in various designs. A new feature of the SDE CRIMP system is that you can now also purchase all dies as a set already mounted in the pliers frame under one item number.Börsig GmbH already has stock of some of the new SDE Crimp products. Therefore we can deliver a large part of the common articles from this range immediately from stock.The dies of the ERGOCRIMP series will, with a few exceptions, only be available until the beginning of March 2023. If you still have a need for dies of this predecessor model, please contact your sales representative.Here is an overview of the main advantages of the SDE crimp system: Price advantage through set purchase of all versions Versatility through the dies Die inserts exchangeable Motor supportive Ergonomic handling Greater leverage due to longer handle Mr. Cem Yumruk, Head of Product Management, explains the advantages to you in the linked video.You can find even more information at:TE Tooling TE Tooling (SDE CRIMP)For further questions, your contact persons from the inside sales department will be happy to assist you and create your personal offer.Contact to the sales team

Blind plugging: Connectors for medical devices

Tue, 31 Jan 23 00:00:00 +0100

ELC - Easy Locking Connector of Series 570 by binder, facilitates the connection in medical technology.The guidance on the connectors allows for blind plugging, provides contact safety and intuitive operation. The ergonomic housing meets protection class IP54. Therefore, the Series 570 ELC is the first choice in the field of medical connectors.binder is certified according to DIN EN ISO13485 and thus meets the high standards in medical technology regulated by the EU Medical Device Regulation (MDR).The series has been designed for more than 5,000 plug cycles as it often needs to be re-plugged or replaced in clinical and home care settings.The advantages at a glance: Blind plugging Contact safety Protection class 54 Ergonomic housing Use on medical devices for: Hospitals Doctor’s offices Care facilities Emergency medical services, ambulances Link to the product catalogueLink to the product overviewFor further questions, your contact persons from the inside sales department will be happy to assist you and create your personal offer.Contact to the sales team

50 years of Combicon - PCB Connection Technology

Thu, 19 Jan 23 00:00:00 +0100

Since 1972, Phoenix Contact has offered the world's largest selection of PCB terminal blocks and connectors for the transmission of signals, data, or power.Users around the world use products from the Combicon portfolio in inverters, advanced control, or advanced smart home applications. Famous innovations include the first PCB connection box with push-fit spring connectors. Through continuous development, the company has repeatedly set standards worldwide and responded to trends such as miniaturization, increased productivity, and efficiency.Another important milestone is the 2021 launch of the modular PCB terminal series SPT, whose individual components can be combined to form a terminal. To make the nearly limitless possibilities easily understandable and quickly available, Phoenix Contact has for the first time implemented a fully digitalized process chain from configurator to production.Advantages: High reliability Great flexibility High material quality Versatile connection technology Long service life Customized PCB connections possible Anniversary page of PHOENIX CONTACTProduct overviews:PCB terminal blocksPCB connectorsModular PCB terminal blocksCustomer-specific PCB connectionsE-PaperFor any further questions about Phoenix Contact's Combicon products, your inside sales representatives are available and happy to create a personalized offer for you.Contact to the sales team

HARTING har-flex® - the PCB Connector

Tue, 10 Jan 23 00:00:00 +0100

You need signal, data or power for your PCBs? No problem with the HARTING har-flex® PCB connectors. Here you have a wide range of options with different designs, numbers of poles and even a miniaturized design. They are available with SMT and THR hold-downs. Hold-downs increase the robustness of the connectors and reduce the load on the contacts. With requirement level 1, har-flex® enables a reliable electrical connection for at least 500 mating cycles and is small, flexible and robust.har-flex® PCB Connector for Signalshar-flex® Signal PCB connectors in the proven 1.27 mm pitch are ideal for miniaturized industrial applications. There are different versions from the number of poles 6 to 100 in steps of 2. Various designs, as straight, angled or with cable connection, give you individual options. Customized variants are possible on request.har-flex® PCB Connector for Powerhar-flex® Power has been developed for the transmission of high currents from 18 A to 29 A. Flexible manufacturing concepts are possible here for SMT and THR designs due to numbers of poles from 2 to 12. They are available in both straight and angled versions and can be used as parallel boards (mezzanine), with extender cards and in motherboard-to-daughtercard configuration. Due to the same form factor, har-flex® power and signal PCB connectors can be used together on one PCB.har-flex® Hybrid PCB Connectorhar-flex® Hybrid makes it possible to combine signal and power contacts on one PCB connector, saving space and effort. They are available in straight and angled versions and can be used with parallel boards (mezzanine), with extender cards and in motherboard-to-daughtercard configuration.har-flex® HD - Card Edge PCB ConnectorsThe one-piece printed circuit board connectors of the har-flex® HD - Card Edge series with a contact pitch of 0.8 mm allow you to directly plug in printed circuit boards with a thickness of 1.6 mm. Due to the small number of contact points, data rates of up to 25 Gbps can be used in high-speed applications. Individual requirements can be met with pole numbers from 20 to 140 and optional hold-downs (SMT or THR).Overview BrochureProduct videoLanding PageIf you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

Improved NCC 770 series with new standard

Tue, 13 Dec 22 00:00:00 +0100

The 770 NCC (Not Connected Closed) series from binder sets new standards in the usual high quality. With an IP67 class in the unplugged state, the popular series clearly stands out from the from the bayonet connector segment. A spring-loaded cover closes the contacts securely and protects them from environmental influences. When mated, the connector meets the requirements of the IP67 class as usual.Developed for medical and industrial applications, binder not only improves the NCC-770 series in terms of protection class, but it can now also be ordered assembled with molded UL-approved cable. You can choose between 2 meter and 5 meter cable length and cable color black or white. Special cable lengths are also possible. White cables are mainly used in medical technology.The advantages at a glance: IP protection class IP67 in unmated state easy handling due to bayonet locking (5000+ mating cycles) no more assembly necessary UL approved PUR / PVC cables Link to the product overviewIf you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

Lead-free connectors according to RoHS

Mon, 05 Dec 22 00:00:00 +0100

Phoenix Contact offers a significant number of connectors in the M5 to M58 series. Due to the company's ongoing environmentally conscious orientation, it was decided at a very early stage to convert the connectors to a lead-free* variant.Lead-free defines the RoHS (Restriction of Hazardous Substances) directive of the European Parliament to the limit value of 0.1 percent. Lead is a toxic heavy metal that is used in manufacturing because of its easy formability and low melting point for processing.In the meantime, Phoenix Contact has already converted a large number of connectors to lead-free*. A conversion to almost 100% of the product portfolio is planned by the end of 2022.Due to this conversion, our customers already have the possibility to purchase electronic connectors according to the upcoming compliance requirements todayClick here for the product listIf you have any further questions about the lead-free* alternative products from Phoenix Contact, please do not hesitate to contact your contact person in the internal sales department who will be happy to prepare your personal offer.Contact to the sales team* The term lead-free refers to the future limit of 0.1 percent in the European Parliament's RoHS (Restriction of Hazardous Substances) Directive.

TE Connectivity KISSLING Products

Wed, 02 Nov 22 00:00:00 +0100

Now new in our portfolio - KISSLING products from TE ConnectivityDo you work in harsh environments and have demanding applications? With KISSLING products TE Connectivity now offers the perfect solution.Power relays and switches from KISSLING are designed for high current, high voltage and switching applications. They offer a wide range of products, including standard and customized options. The portfolio also includes high-performance shrink technology for high-voltage distribution blocks. In addition, relays and switches can withstand harsh operating environments such as shock, vibration, extreme temperatures and moisture. KISSLING relays and contactors are gasless relays designed for long life under extreme operating conditions. They are sealed with technology that meets or exceeds IP67 and IP6K9K standards. They have a voltage range of 12 to 600 VDC and a continuous current range of 20 amps to 1000 amps.With single coil or dual coil systems and monostable or bistable solenoid circuits, the relay range meets a variety of industrial requirements. However, we also know that our customers' individual needs and customized solutions are an important part of our business. Ultra-compact and lightweight variants are available for space and racing applications. The complete relay portfolio includes high power relays, intelligent relays, industrial power relays and special relays such as electronically controlled relays and time delay relays. KISSLING switches control the flow of current between the battery and accessories. They are sealed with IP67 and IP6K9K (steam cleaning) technology, making them a reliable solution for longer life under extreme operating conditions. The full line of switches includes HMI switches, rugged enclosed switches, piston switches and micro switches. We also offer battery switches from 200A to 500A.Switches and battery switches are designed for commercial vehicles, special vehicles, factory and industrial applications, especially for start-stop systems in various mobile applications and control cabinets, as well as remote control capabilities. If there is no suitable product in our portfolio, we will work with KISSLING to develop a solution that meets your requirements.Technical details about relays: from 50A ...up to 1000A DC power switching under load 12V 800VDC continuous voltage with 100% duty cycle wide product range non latching with latching with / without electronics without gas filling KISSLING relays Technical details of the switches: IP65 to IP67 (IP6K9K) sealing optional integrated control functions optional integrated electronic controls robust construction extended lifetime KISSLING switchesIf you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

HIGH PERFORMANCE SMT KEYSWITCH

Wed, 26 Oct 22 00:00:00 +0200

With the SMT Keyswitch KS12 S, the premium switch manufacturer C&K Switches complements its already well-known KS series with an illuminated variant.The KS12 S also has the usual C&K, high quality workmanship and is haptically very appealing. Ínformation about the switching status can be quickly and reliably detected by the user even in complete darkness thanks to the integrated illumination. The new SMT Keyswitch can be sealed up to IP67. Thus, it is also ideally suited for use in harsh environmentsThe K12S is available with red/green/orange or white LED illumination.Application areas of the K12S series: Automotive (motorcycles) Medical sector Off-road transport Applications in harsh environments Lead free soldering Technical Data: Switching capacity: 100mA Electrical life: Between 200,000 and 1,000,000 cycles Contact resistance: < 100 milliohm Insulation resistance: > 1,000 megohms Dielectric strength: > 300 Vrms Operating temperature: -40°C to 85°C Solderability: Compatible with lead free soldering A comprehensive portfolio of different switch types as well as other illuminated switches like pushbuttons can be found on theC&K manufacturer homepageYou can find even more information about the K12S series at: C&K homepage – K12S SeriesFor further questions about the new K12S from C&K Switches, your contact persons from the inside sales department will be glad to help you and will prepare your personal offer.Contact to the sales team

Harting Han-Modular® Domino Modules

Tue, 27 Sep 22 00:00:00 +0200

You already use the Harting HAN series, need even more functions in your connector, but have no more free, available space? No problem with the Harting Han-Modular Domino System.Make two out of one - the Han Domino module is composed of two separate fields, just like a domino. You can mix the individual inserts, called "cubes", as you wish.If you use monoblocks or HAN Modular, you can easily replace the inserts with the HAN Domino System.Since it is compatible with the HAN Modular series, you can also exchange only individual components here and replace one slot of the Modular system with two Domino systems. This gives you, for example, an additional data, power or signal line in the connector you are already using.Your existing holding frames, existing housings and connector modules can thus be supplemented with up to twice as many functions and continue to be used.You can also use the same functions of a Modular connector in a connector of the smaller size by using the Domino modules and thus save space.You can configure these as you wish and tailored exactly to your needs.The advantages at a glance: Compatible with the Han-Modular® series -Up to 50 % space savings due to smaller and lighter plug-in connections, both during production and transport Cost reduction in the installation and operation of machinery and equipment Maximum flexibility due to free configuration Shorter installation times due to the combination of several individual plug-in connections Reduced personnel costs due to shorter installation times Sustainability through consistent modularization Target markets: Automation Robotics Machine building Railway manufacturing Wind turbines Additional information: Brochure Product videoIf you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

HARTING for the control cabinet - rear mounting

Tue, 13 Sep 22 00:00:00 +0200

Do you want to plan your control cabinet compactly and wire it faster with innovative solutions? Then Harting's rear mounting may be just the right solution.Rear mounting allows you to prefabricate your cable harnesses and control cabinet units separately, insert them into the control cabinet housing with one click, and do it easily from inside the control cabinet. This eliminates the need for installers to route cables through the wall cutout and add-on housing before mounting the contact inserts.Instead, the contact inserts are inserted into a plastic holding frame that snaps into the housing with the help of tabs, so the pre-assembled insulating bodies snap into the bulkhead mounting housing directly from behind using the "click and mate" principle.Harting offers various housings from the HAN B Rear-Fit, EMC, Yellock, ES Press series as well as the Han-Eco series for the control cabinet wall. For these, you can use monoblocks as usual, the modular system or also the new HAN Domino system.With the Han-Snap you can plug the already pre-assembled cables directly inside the control cabinet. This is simply installed on the top-hat rail.The advantages at a glance: time and cost savings compact and space-saving practical and easy handling reduction of material and assembly costs Product videoComparison of rear mounting vs. standard mountingHarting information website Harting brochureIf you have any further questions about Harting's rear mounting, please do not hesitate to contact your contact persons in the office and they will be pleased to prepare your personal offer.Contact to the sales team

MCON connector system from TE Connectivity

Tue, 16 Aug 22 00:00:00 +0200

The MCON connector system from TE Connectivity consists of flat plug and socket contact, as well as housing and connector. MCON products are primarily used in electrical and electronic applications. These meet the standards of the automotive industry.The latest generation connectors also offer waterproof and highly resistant designs for motor vibration and operating conditions up to 150 °C. The products are available in various versions.Applications: Airbag/Safety Engine sensors and devices Exterior lighting, sensors and actuators Equipment under the hood- Gear actuators and solenoids Chassis subsystems Advantages: High reliability - for many years of use Resistant to high vibration load Excellent design prevents quality problems Reduces manufacturing and maintenance costs Integrated secondary locking device Polarization, various codings Modular housing Product page at TEProduct overviewProduct catalogue MCON If you have any further questions about TE's MCON products, please do not hesitate to contact your contact person in the office and we will be happy to prepare your personal offer.Contact to the sales team

M8x1 / M12x1 panel feedthroughs

Tue, 02 Aug 22 00:00:00 +0200

The panel feed-throughs with rear-connected cable from Conec offer the possibility to distribute data with M8x1 / M12x1 connectors to the inside of control cabinets or devices. A connection to other components such as an industrial PC or a programmable logic controller can be made there directly using connectors. The M12x1 variant offers a choice of screw locking or the quick locking system with bayonet lock - a secure connection without tools with just a quarter turn.The flanges are available as an overmolded coupling version with various codings. This enables, for example, Industrial Ethernet transmission (100 Mbit/s or 10Gbit/s) or EtherCatP protocol transmission.Your advantages: Mounting thread or quick locking system with bayonet lock Optional 360° shielding IP67 (mated condition) Labeling on request and different color versions Link to the productsIf you have any questions, your contact persons in the office or in the field will be happy to assist you and prepare your personal offer.Contact to the sales team

The new SDE Crimp tooling system

Wed, 20 Jul 22 00:00:00 +0200

The new innovative SDE CRIMP hand tool system from TE Connectivity impresses with an even more robust design and the modular die platform. The tools are used in the industrial, automotive, industrial and commercial transport, household appliance or energy sectors, among others.The SDE CRIMP system will almost replace the previous ERGOCRIMP system. The crimping tool has a two-component handle for better ergonomics and increased leverage due to a longer handle. In addition, the grip force can be individually adjusted. Die inserts can be easily replaced with a simple screw and pin system. Depending on the model, some pliers also have a tilting mount.Here is an overview of the main advantages of the new system: Versatility thanks to SDE inserts Die inserts can be easily changed Top, rounded jaw increases strength Motorized support Ergonomic handling Greater leverage due to longer handle Crimping of loose contacts Frame with positive lock A : Some versions of the SDE tool sets include a standard locator (A) or a foldable positioner (small image) for contact placement and correct positioning of the wires to be crimped. B : The rounded design of the upper jaw increases strength and provides even force distribution. C : Die sets are easily interchangeable with a simple pin and screw system D : The modular SDE.system allows a quick change of tools from manual to motorized hand tools. E : Frame with positive lock reduces quality problems associated with under crimping by releasing the terminal only after the crimping operation is complete. F : Bi-material handles provide better control and ergonomics for repetitive crimping operations. G : Extended handle provides greater leverage, reducing operator effort. H : Grip force can be adjusted for operator comfort when crimping different terminals. More informationen can be found at:TE Tooling (in general)TE Tooling (SDE CRIMP)IMPORTANT NOTICE: According to TE Connectivity, the predecessor models of the ERGOCRIMP series will only be available for approx. 3-6 months. The changeover to the SDE system will take place in three stages until September 2022. For further questions regarding the new tooling system SDE CRIMP or the old system PRO-CRIMPER, your contact persons from the internal sales department will be happy to assist you and provide you with your personal offer.Contact to the sales team

Printable heat shrink identification sleeves

Tue, 19 Jul 22 00:00:00 +0200

In order to meet high requirements for the marking of conductors and cables, TE Connectivity offers, as one of many different marking solutions, the printable shrink sleeves. These are available in both conductor format (-SCE) and continuous format (-CT/continous).The printing is robust and remains legible even in harsh environments.Made of polyolefin, the heat shrink markers have a 3:1 shrink ratio, are fast shrinking and suitable for many diameters.FEATURES AND BENEFITS Thermotransfer printable Durable marking Light weight for aerospace applications Material and printing performance meet military standard 3:1 shrink ratio CSA certification UL approval If you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Your contact to us:Contact to the sales team

Trelleborg Splitting Entry System with IP66

Fri, 08 Jul 22 00:00:00 +0200

The Splitting Entry System from Trelleborg Cable Entry Solutions has been revised and is now available with IP66 protection in the variants MC1 (for one cable) and MC2 (for two cables).Whether in switchgear, central inverters, industrial energy storage (ESS /BESS), power conversion systems or UPS systems, if you have a large cable diameter, Trelleborg divisible cable entries are the ideal solution.Cables with already pre-assembled connectors are no problem, due to the divisible design. By detaching the inserts, these are also possible for the most diverse cable diameters from 8mm to 64 mm, and can also be reduced afterwards. The handling is simple and easy to assemble almost without tools.Increased to IP66, it is fully dustproof and protected against strong jets of water, also suitable for a temperature range of -40°C to +90°C, making it ideal for outdoor use. With its self-extinguishing property according to UL94-V0 and its freedom from halogens (supplied with a yellow card), it rounds off the profile even further.Listing with UL is currently underway and is expected to be completed by the end of the year.If you already use the old version, you can easily switch to the improved version, as they are identical in form, fit and function. The previous version will only be phased out towards the end of the year and is still available during a transition period. The improved version will be available from July 2022.If you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Your contact to us:Contact to the sales team

ZMT Sealed Snap Series from C&K Switches

Tue, 05 Jul 22 00:00:00 +0200

Why the ZMT series fits perfectly for automotive and medical applicationsLow or high currents?It doesn't matter to the ZMT. With a range from 0.1 A to 5 A, the switch integrates into basically any system.Space problems?he ZMT Mini-Snap can be embedded in many applications thanks to its small dimensions and is the solution when space is at a premium. For example, the switch is used in car doors, seats or mirrors. In the medical sector, it is often used in infusion pumps or handheld devices, for example. The switch can also be used in many industrial applications.Your applications place high demands in terms of safety and functionality?The ZMT is extra sealed, thus dust-protected, achieves protection class IP67 and guarantees the operational safety of your application with a cycle of at least 500,000 actuations.Design-in to existing projects?C&K offers the possibility to customize the ZMT in various ways. This allows the ZMT to be perfectly integrated into your, possibly already planned, project and design.Technical data: Dust protected IP67 protected (encapsulated wires only) From 0.1A to 5A max. (ultra-low current available) AC or DC rating voltage (3 A @ 30 VDC) A comprehensive portfolio of different switch types as well as further switches like pushbuttons etc. can be found on the C&K manufacturer homepageFor further questions about the new ZMT Snap switch from C&K Switches, your contact persons from the Börsig office service will be happy to assist you and prepare your personal offer.Your contact to us:Contact to the sales team

The new AMPSEAL 16 for high temperatures

Tue, 28 Jun 22 00:00:00 +0200

The AMPSEAL 16 high temperature connector is designed to withstand extreme heat conditions up to 150°C. It has a higher flammability rating of UL94 V-0 in engine applications, exhaust aftertreatment and transmission control.In addition to its extensive features, the new connector offers two sealing options for SAE and and ISO cables, as well as four different color codes to prevent mismating.The pre-assembled AMPSEAL 16 high-temperature connector provides a cost-effective, easy extension to this extensive product line. This makes it suitable for a wide range of applications.Application areasThe AMPSEAL 16 high temperature connector is suitable for a wide range of applications including power generation, railroad and marine. Trucks Buses Agricultural vehicles Construction machinery and vehicles Special vehicles Motorcycles Sport boats Power generation Tramways Shipping ApplicationsThe AMPSEAL 16 high temperature connector is designed for engine, exhaust aftertreatment and transmission control applications and extends the original application areas of the AMPSEAL 16 product series. engine control exhaust aftertreatment Auxiliary drive cooling systems engine compartment engine sensors Transmission control The advantages of AMPSEAL 16 high temperature connectors at a glance: Extended temperature range of up to 150° for exhaust aftertreatment and powertrain applications Higher flammability rating according to UL94 V-0 Different housing colors improve ease of installation The four color codes prevent mismating Reduced installation time due to pre-assembled one-piece construction - with the AMPSEAL 16 connector's protected interface Two sealing options for SAE and ISO cables If you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

M12 press-fit connector system from Provertha

Tue, 21 Jun 22 00:00:00 +0200

PROVERTHA Cables & Solutions GmbH as a developer and manufacturer in the field of railroad technology, industrial automation, industrial communication, industrial electronics and in the automotive industry has developed a manipulation-proof and flexible connector with the new patented M12 press-fit connector system.Your advantages at a glance: Higher manufacturing tolerances of the bore on the housing due to assembly via a patented flexible press-fit zone Manipulation and vibration resistance (without hexagon) Extremely robust due to high holding forces and connection via crimped cable strands Determination of the cable outlet direction without additional effort (by alignment of the coding) Compact design Effective shielding due to metallic crimp connection Technical Data: IP67 (in locked state) ≥ 250 mating cycles -25°C to +85°C M12 locking thread Available Variants:M12 press-fit pin A-coded 4 pole M12 press-fit socket D-coded 4 poleAccessories: Press-in tool and protective capsIf you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

HARTING Han-Modular Domino Modules

Fri, 10 Jun 22 00:00:00 +0200

Harting presents the popular Han-Modular® series in combination with a world first, the Domino module.With this you can achieve both space and weight savings of up to 50%. Whether in automation, robotics, machinery, web manufacturing or wind turbines; you can combine power, signals, data or compressed air, as well as pin and socket contacts in one module.Just as a domino is made up of two separate fields, the Domino module is also made up of two separate fields, called "cubes". These have a plug-in face consisting of two almost square surfaces and can be configured as you wish and exactly to your needs.Each module consists of a cube with a small tab and a large tab for fixing in the holding frame and is plugged together via a toothing.It is compatible with the Han-Modular® series, so you can easily integrate the Domino System into existing systems; existing housings, holding frames and connector modules can be added and continue to be used.The advantages at a glance: up to 50% space savings due to smaller and lighter plug-in connections, both during production and transport cost reduction during installation and operation of machines and systems maximum flexibility through free configuration shorter installation times due to the combination of several individual plug-in connections reduced personnel costs due to shorter installation times compatible with the Han-Modular® series Sustainability through consistent modularization Link to the product videoIf you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

NearFi – contactless transmission technology

Thu, 05 May 22 00:00:00 +0200

The NearFi products from Phoenix Contact enable a new contactless transmission technology for protocol-independent Ethernet communication. The transmission takes place via an air gap between the two couplers. Up to 50 W and 100 Mbit/s can be transmitted simultaneously through this gap.The air space between the two couplers can also be replaced by materials such as glass, plastic or wood. This enables a wide range of possible applications. Probably the greatest advantage of this technology, however, is that there is no classic wear due to mechanical movement.The housing is equipped with two M12 connectors so that Ethernet and voltage can flow simultaneously. The housing also has an IP65 protection class and is thus protected against dirt, dust and water jets.Getting NearFi transmission up and running is very simple. Both a base and remote coupler are required. Both do not require separate configuration before use and can therefore be deployed just as quickly as conventional connectors. The couplers visually signal by a green LED indicator that the mating has worked properly. The couplers do not have to be exactly on top of each other.Because of the inductive energy, the couplers can also supply other end devices such as I/O stations or switches with energy.Advantages at a Glance: Contactless Protocol independent High performance Flexible LED ring for visual diagnosis Protective housing IP65 Typical Applications: Robot tool change Material handling systems Driverless transport systems Handling and lightweight robots Clean room systems Nearfi TechnologyProduct overviewProduct video If you have any further questions about the "NearFi" products from Phoenix Contact, please do not hesitate to contact your contact person in the office and we will be happy to prepare your personal offer.Contact to the sales team

IP67 Snap-In Connectors of Binder Series 720 and 620

Wed, 27 Apr 22 00:00:00 +0200

Your applications take place in harsh environments and you are looking for a reliable connector? The connectors of the miniature series 720 and the subminiature series 620 offer the possibility to realize IP67 protected connections even in confined spaces. Both series have a precisely manufactured plastic housing. The practical snap-in locking mechanism enables uncomplicated plugging and unplugging of the connection. With the IP67 protection class achieved when mated, the connectors of the 720 and 620 series ensure a reliable connection even in particularly damp and dusty environments. The already well-known series have already proven themselves in numerous industrial applications. Some examples are security and monitoring systems, lighting systems e.g. in the garden area, heating systems used in industrial greenhouses, as well as in stadium seat heating systems. Both series are also available in the gray-white color typical of the medical technology sector. Visible soiling thus becomes more clearly visible.For better recognition when using multiple connections, both series are available in different color coded variants. The miniature series 720 is available in the number of poles 3-12 and has a plug diameter of 16mm. Connectors of the subminiature series 620 are again significantly smaller with a diameter of only 11.5 mm and available in the number of poles 3-8.Additional information:Link to the videoDownload data sheet series 620Download data sheet series 720For further questions about the series, as well as the complete product portfolio of the manufacturer Binder, your contact persons from the office will be happy to assist you and prepare your personal offer.Contact to the sales team

HARTING VarioBoot RJ45 - the patch cable solution

Thu, 21 Apr 22 00:00:00 +0200

Whether in automation, robotics, in machines or wind turbines; the Harting VarioBoot RJ45 is a perfect solution for your control cabinets, electrical enclosures or Ethernet connection panels.You don't know yet in which direction it should go? No problem, the Harting VarioBoot RJ45 can be adjusted up to 20 times; angle changes in all directions up or down / left or right up to max. 90° without interference or transmission loss are no problem due to its adjustable RJ45 head.It offers a transmission performance of up to 10Gbit/s Cat.6A; protection class IP20, has robust locking levers, is compact, flexible and has a low overall height.A quick pull on the bend protection sleeve and a click in the desired direction is all it takes for the cable to find another path.Various cable jackets are available for FRNC, PVC and PUR cables. In addition, the HARTING VarioBoot is compatible with HARTING's Han-Modular® series.The Harting VarioBoot RJ45 is available in different versions:Harting VarioBoot RJ45 system cable 4x 2x AWG 26/7 HARTING VarioBoot RJ45 Preferred directions left/right HARTING VarioBoot RJ45 Preferred directions left/right Features: Transmission up to 10 Gbit/s Overmolded Locking lever protection Adaptable and changeable cable outlet Flexible, small space requirement Standards and approvals: IEC 11801 IEC 61156-6 IEC 60332-1 Flame retardancy IEC 60754-2 Halogen free IEC 60754-2 non-corrosive IEC 61034 low smoke Technical characteristics Number of cores 8 Core structure 4x 2x AWG 26/7 Steckverbinder 1 HARTING VarioBoot RJ45 Preferred directions left/right Steckverbinder 2 HARTING VarioBoot RJ45 Preferred directions left/right Temperature limit -20 ... +60 °C unmoved, 0 ... +60 °C moving Protection class according to IEC 60529 IP20 Transmission characteristics Cat. 6A, class EA up to 500 MHz Data rate 10 Mbit/s, 100 Mbit/s, 1 Gbit/s, 2,5 Gbit/s, 5 Gbit/s, 10 Gbit/s Cable material FRNC (LSZH) Cable color grey, red, yellow, green, blue Cable lenght 0,3 m / 0,4 m / 0,5 m / 1 m / 2 m / 3 m / 5 m / 7,5 m / 10 m / 15 m / 20 m / other cable lengths on request Harting VarioBoot RJ45 cable assemblies 4x 2 Twisted Pair HARTING VarioBoot RJ45 Preferred directions top/bottom HARTING VarioBoot RJ45 Preferred directions top/bottom 4x 2 Twisted Pair HARTING VarioBoot RJ45 Preferred directions left/right HARTING VarioBoot RJ45 Preferred directions left/right 4x 2 Twisted Pair HARTING VarioBoot RJ45 Preferred directions top/bottom HARTING VarioBoot RJ45 Preferred directions left/right Features transmission up to 10 Gbit/s overmolded Locking lever protection Adaptable and changeable cable outlet Flexible, small space requirement Standards and approvals IEC 11801 IEC 61156-6 Technical characteristics Number of cores 8 Core structure 4x 2 twisted pair Connector 1 HARTING VarioBoot RJ45, preferred directions top/bottom or left/right Connector 2 HARTING VarioBoot RJ45, preferred directions top/bottom or left/right Temperature limit -30 ... +75 °C unmoved, -5 ... +50 °C moving Protection class according to IEC 60529 IP20Schutzart nach IEC 60529 IP20 Transmission characteristics Cat. 6A, class EA up to 500 MHz Data rate 10 Mbit/s, 100 Mbit/s, 1 Gbit/s, 10 Gbit/s Cable material PUR (polyurethane) Cable color yellow Cable length 0,5 m /1 m / 2 m / 3 m / 5 m / 7,5 m / 10 m / 15 m / 20 m / other cable lengths on request Further information:Product videoDownload Product instructionIf you have any further questions about the Harting VarioBoot RJ45, please do not hesitate to contact your sales representative who will be happy to prepare your personal offer.Contact to the sales team

INDUSTRIAL mini I/O Connectors

Thu, 07 Apr 22 00:00:00 +0200

TE Connectivity's Mini I/O connector system is the ideal solution for your industrial application where high reliability is required due to harsh environmental conditions. The portfolio consists of right-angle and straight PCB and cable connectors. Due to the space-saving design, the connectors are only a quarter of the size of conventional RJ45 connectors and offer a variety of cable versions. Another advantage is the metal latch spring. This prevents unintentional disconnection of the network connection. This minimizes the risk of downtime. The field-installable version of the Industrial Mini I/O connectors also features a penetration termination that minimizes the time required to connect the wires. Field installation is possible in any environment with just a single tool. The advantages at a glance: Simple and fast cable assembly on site High reliability in harsh environmental conditions Space-saving design Wide range of cable versions available Wire-to-wire connections possible Prevention of mismating through coding Meets Cat5e requirements when used in an Ethernet application. If you have any further questions, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

E-mobility - central cornerstone of the future

Tue, 29 Mar 22 00:00:00 +0200

Since the end of 2020, Phonix Contact has significantly expanded its e-mobility portfolio. The aim of this expansion is to be able to offer the customer everything from a single source. Under the "CHARX" brand, one can find all components from the charging socket to the controller to the charging cable. This is nicely illustrated by the different areas "CHARX power", "CHARX control", "CHARX protect", "CHARX manage" and "CHARX connect". Under "CHARX connect" there are both DC and AC charging cables. The AC charging cables, among others, are available in the standardized types "Type 1", "Type 2" and "GB/T". The cable length can vary between 1.5 and 15m depending on customer requirements. Since March 2021, there is also the "UL certified" variant for the North American market.The DC charging cables - HPC provide a fast charge of 100 km in only 3-5 minutes charging time. This is made possible by a charging power of 500,000 watts and an environmentally friendly water-glycol mixture.The "CHARX control modular" offers the possibility of individual control in the application, regardless of whether it is a single wallbox, a charging station or an entire charging park.In July 2021, Phoenix also launched a new "Type 2" socket for charging with LED display and temperature measurement. This socket offers significantly more safety and easier installation. The LED light can be customized (illuminated or flashing).Furthermore, the "STEP POWER" series has been extended to meet the e-mobility standard.Advantages for Phoenix Contact's e-mobility offerings: Large product portfolio of the "CHARX" brand Easy setup, commissioning and maintenance Future-oriented Latest technologies Standard-compliant charging points and interfaces Flexible Expandable Phoenix Contact has been a member of the German Federal Electromobility Association since 2021 in order to develop even faster and to be able to participate even better in standardization.You can find even more information about the series in the brochureor at the websiteIf you have any further questions about the "CHARX" family from Phoenix Contact, please do not hesitate to contact us and we will be happy to prepare your personal offer.Contact to the sales team

Multitalent M23 circular connector

Tue, 08 Mar 22 00:00:00 +0100

The M23 circular connector from Phoenix Contact proves to be a real all-rounder in signal and power transmission thanks to its wide selection of designs and pole patterns. The M23 is also available as a hybrid connector combining both. This allows you to transmit the signal and power function via just one connection. This saves space and costs. The right solution is therefore available for every customer requirement.This is what distinguishes the M23 connectors Easy and fast assembly Versatility Flexible connection High safety Fast locking Possible versions Signal connectors Power connectors Hybrid connectors Different connection types, such as crimp or solder connection Number of poles from 6 to 19 Power maximum 150A and 630V Protection class up to IP67 possible depending on design more information about the productsCatalogueVideo about the M23 hybrid circular connectors from Phoenix Contact on Youtube If you have any further questions about the M23 circular connector family from Phoenix Contact, please do not hesitate to contact your contact person in the internal sales department who will be happy to prepare your personal offer.Contact to the sales team

Change in metal quotation - no more DEL copper quotation

Thu, 24 Feb 22 00:00:00 +0100

Dear business partners,since 14.02.2022 there is no more publication of the DEL Copper Note. The copper calculation with reference to the DEL Note as a basis for calculation is therefore no longer possible. In order to create transparency as quickly as possible, we are announcing the following procedure for copper calculation.Our new basis for copper calculation is the LME quotation (London Metal Exchange/ lme.com / +3%) of the previous day. Price conversion also based on the previous day's price (issued via European Central Bank) Your currently agreed prices remain valid. Thank you for your understanding.If you have any questions, please feel free to contact us as usual.Thank you very much.Your Börsig TeamContact to the sales team

Impact of the war in Ukraine on our supply capability

Thu, 24 Feb 22 00:00:00 +0100

Currently the consequences of the war in Ukraine are still unforeseeable.Where we can, we would like to create the best possible transparency through the letter linked belower.Link to pdf

Securing clip for 620/720 series prevents cable pull

Tue, 22 Feb 22 00:00:00 +0100

Binder is responding to the increasing demands in terms of the safety of cable connections in the field of medicine and automation with the securing clip for the 620 and 720 subminiature/miniature series.The clip is a successful accessory that provides additional protection for existing connections without much effort.The securing clip has three locking lugs that cause a clearly perceptible click when attached. In order to simplify the assembly, the clip has a marking.The clip can be reused and repositioned as desired. This gives you the opportunity to significantly increase the security of your connections in seconds.To protect the connection again extra against deliberate loosening, the clip can be additionally secured with a commercial cable tie. For this purpose, there are two small openings on the clip. Once attached, this makes it much more difficult to remove the cable connection intentionally or unintentionally. In environments with heavy pedestrian traffic and with particularly sensitive devices, e.g. a hospital, this is an aspect that should not be neglected. The securing clip is available in black and white to match the series and comes in a pack of 10.Tobias Kreiss, product manager for Binder products at Börsig, explains how to use the clip in the linked video.If you have any further questions about the new safety clip from Binder, please do not hesitate to contact us. We will be happy to prepare your personal offer.Contact to the sales team

Single Pair Ethernet (SPE) - Trend in Digitalization

Mon, 07 Feb 22 00:00:00 +0100

The Single Pair Ethernet (SPE) connectors from Phoenix Contact offer high-performance data transmission with simultaneous power supply to end devices. If you want to invest in your building cabling or in your industrial application in a future-oriented and smart way, then Single Pair Ethernet (SPE) is exactly the right solution. Why Single Pair Ethernet (SPE)?Single Pair Ethernet (SPE) connectors fully offer a more cost-effective alternative to existing Ethernet connections. Both the higher speed of data transmission and the space-saving concept of the connectors score points. These advantages make SPE connections an optimal solution for Industry 4.0 or IIoT (Industrial Internet of Things).Application possibilities Building Automation industrial automation Robotics Railroad industry lighting Advantages of Single Pair Ethernet Cross-application Efficient Standardized connectors according to IEC 63171-2 (IP20) and IEC 63171-5 (IP67) Transmission rates of up to 10 Mbit/s at up to 1000 m Transmission distances of 40 m at up to 1 Gbit/s Power up to 50 W plug & play Single and multiports Continue to use existing cabling AwardThe connectors from Phoenix Contact were awarded the "Best of Industry Award 2021".Further information on the products can also be found at the Phoenix Contact websiteOr directly in the Phoenix Contact e-paperIf you have any further questions about Single Pair Ethernet (SPE) from Phoenix Contact, please do not hesitate to contact your Phoenix Contact sales representative who will be happy to prepare your personal offer.Contact to the sales team

Hummel Hybrid Circular Connectors

Mon, 31 Jan 22 00:00:00 +0100

The Hummel Hybrid circular connectors are an ideal single cable solution (OCT-One Cable Technology) in industry, automation and robotics.Hereby Hummel enables the transmission of power, signals (analog) and data/Ethernet (digital) in one hybrid solution.You save space, time and money because you only need one cable and one connector instead of two or three. With fewer cables, you also have less weight and less cabling effort. Optionally, however, several cables can also be brought together in one connector.Protected by a metal housing, the connectors are also ideal for use in harsh environments. The housings are made of brass or die-cast zinc, and INOX versions are also available as screw versions. The IP protection is IP 67 and IP 69K (both when mated). UL, CSA and VDE product approvals have already been obtained.Hummel has various hybrid solutions for all connector series in its program, because due to the modular system, a wide range of housing designs and versions are available. Both with screw or quick-lock and with TWILOCK-S: pluggable with Speedtec.Hummel hybrid products: M40 Hybrid circular connector M40 Hybrid 2 x Ehernet M40 Hybrid 6x Ethernet Circular connector M23 Hybrid Type 1 M23 Hybrid Type 1 4 x Ethernet Circular connector M23 Hybrid Type 2 M23 Hybrid Type 2 4 x Ethernet Circular connector Hybrid M16 (12+3) Click here for the overview on the Hummel product pageClick here for the product videoTo our overview of HUMMEL productsIf you have any further questions about the Hummel Hybrid circular connectors, please do not hesitate to contact your contact person in the office. They will be pleased to prepare your personal offer.Contact to the sales team

D-Sub hood with patented multiple locking system

Mon, 24 Jan 22 00:00:00 +0100

PROVERTHA Cables & Solutions GmbH as a developer and manufacturer in the field of railroad technology, industrial automation, industrial communication, industrial electronics and in the automotive industry has released the new 217DCN - FLEXLOCK® series, a nickel-plated full metal hood for high-quality EMC applications with a patented multiple locking system.This features: Screw locking (thumbscrew, combination slot, Allen) or. Quick Lock® push-pull locking (one-hand operation secured by audible feedback). Other options for cable-to-cable connections: Locking with insert nut Assembly of D-Sub halves by "snap-together" design Connection only by snapping in Only 2 pre-assembled cover screws necessary at the cable exit (time and cost saving) Secure locking by retaining springs in spring steel design Internal cable clamp IP 20 protection class Cable outlet 45° and 180° For a temperature range from -55°C to +90°C For harsh environments Available in the following sizes and packaging: 9-pole (size 1 / cable diameter 3 - 9.5mm) In preparation: 15-pin (size 2 / cable diameter 3 - 8.5mm) In preparation: 25-pin (size 3 / cable diameter 3 - 8,5 mm) Complete set in bag As bulk packaging for large series If you have any further questions about the new D-Sub hood from Provertha, please do not hesitate to contact your contact partner in the office and we will be pleased to prepare your personal offer.Contact to the sales team

Record earnings in fiscal year 2021

Tue, 18 Jan 22 00:00:00 +0100

Neckarsulm, January 2022 - Electronic distributor Börsig achieves record sales in fiscal year 2021, representing growth of more than 28% over the previous year and also the best result achieved since the company was founded in 1969. Börsig GmbH looks back on a very positive development in the 2021 financial year (01.10.2020 - 30.09.2021). The sales target for 2021 was exceeded by 15%. Managing Director Stefan Börsig commented: "I am very pleased to see how the company has developed over the past years. This confirms the investments we made in personnel, further training, restructuring and optimization of internal processes."Thomas Engler, Sales Director of Börsig GmbH, also expects a good order situation for the coming business year. He mentions the continuing shortage of raw materials and the ongoing effects of Corona as the reason for this. "We recognized at an early time that there would be supply difficulties and have considerably expanded our storage capacity in order to be able to purchase and stock as much goods as possible. This ensures delivery reliability for our customers, which is gratefully appreciated by them," said Mr. Engler. "At the same time, warehouse stocking is not everything. This success would not have been possible without the entire team in logistics and all other departments, who did an outstanding job and also did everything possible in the home office to help our customers. We would like to thank all our colleagues for their efforts in this turbulent year," continues Mr. Engler.Börsig is a specialist distributor for electromechanics and cooperates with more than 20 premium manufacturers in this segment. Various internal sales teams - at headquarters in Neckarsulm as well as in the sales offices in Soest (North Rhine-Westphalia), Freiberg (Saxony) and the subsidiaries in Vienna (Austria), Brno (Czech Republic) and Lódz (Poland) - as well as a network of field employees provide personal customer service with high technical know-how. The central warehouse at headquarters realizes sales outside packaging units with a wide range of shipping service providers and options.

ATPS22 - Vandal proof pushbuttons

Tue, 14 Dec 21 00:00:00 +0100

With the new ATPS22 pushbutton, C&K Switches is expanding its product portfolio around the existing ATP series.The new pushbutton impresses with its particularly high resistance to vandalism. This is achieved by a specially designed, short housing and the use of high-quality materials in production. The ATPS22 has been tested under harsh environmental conditions and is also ideally equipped for all other conditions. The switch achieves protection class IP67.Why the ATPS22The above-mentioned features result in a high potential of saving time and further resources when using the ATPS22, which remain after possible damage, threatening product recalls and repairs. Furthermore, the ATPS22 ensures the functionality of your system due to its indestructibility.Advantages of the ATPS22 series at a glance Suitable for indoor and outdoor use Vandal proof due to short housing Corrosion resistant Lightweight and robust Available in different versions Easy mounting Cost savings due to particularly long service life. Life cycle of 1,000,000 pushes Typical application areas Alarm and security systems access control systems service switches bus and rail vending machine industry elevator systems However, the classic design and appealing stainless steel look of the new ATPS22 also allows it to be perfectly integrated into all other systems that place equal importance on durability and high-quality appearance.Available in many color and symbol variations.See also the C&K video on the ATPS22 seriesIf you have any further questions about the new ATPS22 series from C&K, please do not hesitate to contact your C&K sales representative who will be happy to provide you with a personalized quotation.Contact to the sales teamYou can find even more information about the new series and other products of the manufacturer C&K under:C&K Homepage

New high current pin up to 400 A for your test system

Fri, 03 Dec 21 00:00:00 +0100

With 30 spring-loaded contacts and designed for 400A continuous current, the new HSK5455 high-current pin from PTR Hartmann GmbH perfectly meets the increasing demands of the industry for ever more stable performance in contact tests, even at high currents.The HSK5455 offers very high contact reliability even in the presence of vibrations and transverse forces, making it particularly suitable for use under harsh conditions. The specially designed probe head compensates axial tolerances with a deflection of up to 3.0 °. The materials used also guarantee a long service life and a particularly low voltage drop during testing. The HSK5455 is suitable for contacting prismatic battery cells, battery modules and battery packs, as well as for contacting busbars.By sliding on a cable lug at the end of the contact, the electrical connection can be made, thus enabling quick connection and disconnection. In order not to hinder the movement, a highly flexible conductor is recommended for the connection.Mechanical data Maximum stroke 7.00 mm Working stroke 5.00 mm Spring preload 24.00 N Spring force at working stroke 30.00 N Electrical data Maximum current load 400.0 A Typical contact resistance ≤ 0.2 mOhm Materials Housing Brass, silver-plated Spring Stainless steel, uncoated Piston Copper alloy, silver-plated If you have any further questions about the new HSK 5455 high-current pin, please do not hesitate to get in touch with your contact person in the office who will be pleased to prepare your personal offer.To the contact details of the sales teamOnline product requestFor more information about the new series, please visit: https://www.ptr-hartmann.com

Illuminated symbols of the Series 82 pushbuttons

Mon, 22 Nov 21 00:00:00 +0100

EAO, the expert partner for innovative, intuitive and reliable Human Machine Interfaces (HMIs), is expanding the 82 series to include pushbuttons with illuminated symbols. In addition to the modern design, this series also offers a high front protection class (IP65/IP67) and a long service life.High-contrast and brilliantly illuminated symbolsIn many applications, even in harsh environments, it must be immediately apparent whether a machine or device is switched on or off. The luminous symbols serve as status indicators or help locate the pushbutton. Illuminated symbols with single or bi-color LEDsThe symbols illuminate with red, green, blue, white or red/green LEDs for high contrast and visibility. By means of different symbols (standard symbols - more on request) it is immediately visible which device is switched on or off.Link to series 82 product videoLet us advise you and contact us. We will be happy to provide you with a suitable offer.To the contact details of the sales teamOnline product request

The new Bocube enclosure from BOPLA

Fri, 12 Nov 21 00:00:00 +0100

With the Bocube, manufacturer BOPLA offers a switch housing for all common applications. Thanks to the use of high-quality plastic or aluminum, the Bocube is significantly lighter than the housings commonly available on the market. Anyone who takes a look at older switch enclosures will quickly notice the damage that a few years of weather-related corrosion and other external influences can cause to the enclosures commonly used in industry. With the Bocube, problems of this kind are a thing of the past. Thanks to its material and design, the Bocube provides a very high level of corrosion protection, which can also significantly increase its service life.The Bocube is also perfectly suited for tight installation situations. If desired, the enclosure can be assembled completely without screws. The Bocube can be opened with a standard flat-blade screwdriver and closed by hand.Extensive range of accessories and variety of models:Bopla offers 25 different sizes and more than 150 standard models for the Bocube. The Bocube is available in many different color combinations. The housing can be easily customized thanks to its extensive range of accessories.Also available: the Bocube Alu for harsh conditions:Made entirely of aluminum, the Bocube ALU is even more robust and resistant to external influences and mechanical stress. The enclosure meets the requirements of protection class IP69. The Bocube ALU is a visually high-quality alternative to the standard enclosure.All Bocubes are manufactured using the latest production techniques and to the highest quality standards.The following linked videos impressively demonstrate the advantages of the Bocube:Video 1: The Bocube – handlingVideo 2: Variants and accessoriesVideo 3: The Bocube Alu

Börsig founds subsidiary in Poland

Fri, 22 Oct 21 00:00:00 +0200

The subsidiary with offices in Lodz enables the holistic support of customers in Poland and neighboring countries.After founding Börsig Austria GmbH in 2014 and Börsig s.r.o. in the Czech Republic in 2018, the electronic distributor is now opening its third subsidiary in Poland, expanding further in the direction of Eastern Europe. "Many of our German customers have production and administration facilities in Eastern European countries," explains Thomas Engler, Sales Manager at Börsig GmbH, adding, "In order to continue offering these customers holistic support, we have decided to expand further into Eastern Europe."Location LodzThe Lodz location was chosen by the electronic distributor because of its convenient location in an up-and-coming Polish metropolis. "The location ensures the intensive and individual support of the customers directly on site as well as the area-wide distribution" says Alexander Angelopoulos, Commercial Manager at Börsig GmbH. Initially, a new employee will be trained in the processes and products of the electronic distributor, to enable the full consultancy and support of the customers. The goal is to gradually expand the sales activities even further and to increase the number of sales employees over the next few years as orders grow.About BörsigBörsig is a specialist for electromechanics and cooperates with more than 20 premium manufacturers in this field. Different sales teams at the headquarters in Neckarsulm, in the sales offices in Soest (North Rhine-Westphalia) and Freiberg (Saxony) as well as in the subsidiaries in Vienna (Austria) and Brno (Czech Republic) plus a field service, enable a personal customer service with high technical know-how. The central warehouse at the headquarters realizes sales outside packaging units with a wide range of shipping service providers and options.

10-year anniversary of sales office north

Fri, 15 Oct 21 00:00:00 +0200

Sales Office North in SoestIn October 2011, the Sales Office North in Soest started with one employee. In the meantime, there are eight employees at this location, plus one sales representative. A sales area is supported that stretches from the middle of Germany to the far north."Looking back over the ten years, we see steady growth in this sales area. Especially in the greater Ruhr area, many machine builders are located, which we can serve perfectly from Soest," says Thomas Engler."Despite Corona, we are experiencing good demand. With our colleagues in the North Sales Office, we are also close to the customer in this region and are experiencing an upswing in the economy," says Mr. Börsig. In the small framework of an excellent dinner, the employees from the location celebrated this pleasing event with the company owner Mr. Börsig, sales manager Mr. Engler and sales office manager Ms. Fröhlich.

Börsig celebrates 30th anniversary in Saxony

Thu, 16 Sep 21 00:00:00 +0200

On 28.06.1991 Börsig GmbH opened its first sales office with two employees in Freiberg. Through the sales office located there, the trade with connectors, cables, cable assemblies and other components should be expanded throughout Germany and the customer-oriented consulting and support should be intensified. In the meantime, the sales office comprises six colleagues and achieves a share of 12% of total sales. In view of the current situation with Corona, the anniversary was celebrated in a small circle in Freiberg. Mr. Börsig and Mr. Engler (Sales Manager) met with the colleagues in Freiberg to look back, but also to look forward "It is nice to see that our sales office in Saxony is so successful. After the first years after the reunification were difficult, the success turned out to be due to the high commitment of the colleagues on site," said Stefan Börsig, owner of Börsig GmbH."We were able to win Mr. Graw for us this year, and with his experience in sales and in the electrical industry, we look to the future with confidence that the sales office will remain on the road to success," says Mr. Engler, sales manager at Börsig GmbH.Börsig GmbH has been an authorized partner of well-known premium manufacturers of electromechanical components since 1969. The trade with plug connections, relays, switches, cables, tools and plastic articles takes place world-wide. Börsig GmbH now has around 170 employees working at its headquarters in Neckarsulm and its sites in Freiberg (Saxony), Soest (North Rhine Westphalia), Vienna (Austria) and Brno (Czech Republic).

Cable entry systems from Trelleborg

Wed, 01 Sep 21 00:00:00 +0200

Get more out of your application with Trelleborg Cable Entry Solutions!The divisible cable glands enable the installation of assembled and already connected cables in the applications. This is possible even after the initial installation of the system. Due to the special onion ring technology, the corresponding cable diameters from 8 to 67mm can always be inserted with an exact fit and IP55 protection. In addition, strain relief is ensured during installation in the same work step. Especially for rigid cables with large cable diameters, the assembly is considerably easier and faster, thanks to the divisible cable entry system!Your advantages: Flexible assembly even after initial installation for cables with assembled connectors Maximum diameter up to 67mm Simple and fast introduction of trunk lines Time savings of over 60% compared to conventional systems Onion ring technology enables precise cable insertion Vibration proof Areas of application: Mechanical and plant engineering switchgear construction Renewable energies (wind, PV, energy storage) Ship and traffic engineering Let us advise you and contact us. We will be happy to provide you with a suitable offer.To the contact details of the sales teamOnline product request

Off through the wall! Control cabinet bushings

Mon, 16 Aug 21 00:00:00 +0200

Binder now offers control cabinet bushings suitable for the M12 and M12 Power product series 713, 813, 814, 823 and 824. Suitable for these connectors, the bushings enable the connection of signal, data and supply cables and comply with the DIN EN 61076-2-111 standard. The bushings are space-saving, robust and easy to handle. Pre-assembled cables can be connected. This eliminates the need to route cables and wire connectors in the control cabinet. Assembly and maintenance can thus be made more efficient and process-safe.The main area of application is in automation technology, where reliable connections for signals, data or power supply are essential.The advantages at a glance: Industrial standard M12 Sealed (IP67) Connection of pre-assembled cables Process safety Complies with DIN EN 61076-2-111 standard Below are the product specifications and the different control cabinet feedthrough series:Product specifications: Meets the requirements of IP67 protection class Mechanical life >100 mating cycles Operating temperature range -40 °C to +85 °C Panel feedthroughs 713 Series A-coding 3 to 8 poles 3 to 5-pole: Rated current 4 A at 40/250 V Rated impulse voltage 1500/2500 V 8-pole: Rated current 2 A at 30 V Rated impulse voltage 800V Panel feedthroughs 813 Series T-coding 4-pole Rated current 12 A at 63 V (DC) Rated impulse voltage 1500 V Panel feedthroughs 814 Series S-coding 2 and 3 poles each + PE Number of poles 2 + PE: Rated current 16 A Rated impulse voltage 630 V Number of poles 3 + PE: Rated current 12 A Rated impulse voltage 6000 V Panel feedthroughs 823 Series L-coding 4-pole + FE (functional earth) Rated current 16 A at 63 V (DC) Rated impulse voltage 1500 V Corresponding connectors with connection cross-sections of: 1.5 mm2 (AWG 16) with ferrule, 2.5 mm2 (AWG 14) without ferrule Panel feedthroughs 824 Series K-coding 4-pole + PE Rated current 12 A up to 630 V Rated impulse voltage 6000 V Let us advise you and contact us. We will be happy to provide you with a suitable offer.To the contact details of the sales teamOnline product request

EAO: Series 84 IO-Link Touch

Mon, 02 Aug 21 00:00:00 +0200

With the 84 IO-Link Touch series, EAO introduces extremely versatile control elements for human-machine interfaces (HMI). In addition to the standard version, machine designers can choose between stainless steel and hygienic versions, especially for harsh industrial applications. Operating and signaling functions can be configured completely freely and thus tailored to the desired application: Illumination, symbols and even the switching function can be selected as required. The 84 series is a perfect component for machines and systems in the Industry 4.0 philosophy. It is easily networked with modern control systems via the integrated 5-pin M12 screw connection and the IO-Link communication interface.Your advantages at a glance: Freely configurable HMIs with IO-Link interface (Industry 4.0) Optional illumination of standard or customer-specific symbols RGB illumination with LED in 16 million colors, adaptive to ambient brightness Capacitive actuation with different sensitivities Low space requirement with only 25.8 mm installation depth IP67 protection class Typical fields of application are in automated production for control systems and control cabinets of all kinds. Especially in the food and beverage industry, in packaging plants or robot transport systems, but also in control stations in industrial logistics or in mobile medical devices and in transmission systems for telecommunications, the HMIs ideally play out their strengths.Link to product videoAre you interested in these products?Find out more directly from your contact person:To the contact details of the sales teamOnline product request

CONEC: Overmolded CPC connectors

Wed, 14 Jul 21 00:00:00 +0200

The reliable CPC connector series, proven in many industries, is now also available from CONEC in overmolded versions in the 13-7, 13-9 and 17-3 designs specifically for agricultural and automotive engineering. Areas in which robust and sealed connectors are traditionally required. The CPC connectors, which all have a quick-locking mechanism with threaded support and positive latching, have significantly smaller dimensions than an Isobus connector, for example. In addition, special counterparts have been added as termination caps, which have a locking loop as standard, which can be attached to the cable of the connector to be protected and thus cannot be lost. Alternatively, a steel cable can be used for fastening. When mated (mating part or cap), the overmolded connectors reliably meet the IP67 degree of protection. Versions with single and double wires for Y-distributors are available. Optionally, the standard open cable ends can be fitted with further connectors (e.g. DT, Superseal) on request. Also optional are wired end caps for bus termination.Your advantages at a glance: Compact design with IP67 protection class (plugged in or with protective cap) Connection of two lines to one connector for Y-distribution possible Use in harsh environmental conditions Continuous protection of the housing and the cables Examples of applications include agricultural and construction machinery, emergency vehicles, road construction machinery, and the transportation industry. They are also used in control, regulation or robotics technology as well as in power supply and injection molding and machine tools.Are you interested in these products?Ask your contact person directly for more information:To the contact details of the sales teamOnline product request

CONEC: DT and Superseal as Y-distributor

Tue, 15 Jun 21 00:00:00 +0200

Conec's flexible distribution systems, which are available in different cable lengths and configurable cable ends, make it possible to design systems that are more compact and thus save space. Signals and power are distributed to two additional connectors and are therefore especially popular in so-called "daisy chain" applications. Here, several components are connected in series by means of a BUS system and controlled by only one source.Currently, the versions with double output are offered with a PUR cable in various lengths and a strand cross-section of 0.75mm². The DT version is already available in 2-pin, 4-pin and 6-pin versions, the Superseal versions in 2-pin, 3-pin and 4-pin versions.Further versions are already being planned. In addition, Conec reacts as usual flexibly and professionally to customer requests and implements customer-specific requirements without delay.End cap for unused connectorsThe versions with double cable outlet are supplemented by an end cap, which realizes a protection class of IP67 / IP69K for unused connectors of the application and protects them against contamination. It is optionally possible to integrate resistors and shorting bridges in the cap, for example to realize a terminating connector for a CAN bus system. A hole on the cap offers the possibility to integrate a fixing tape and to make the termination cap captive.Your advantages at a glance: Compact design with protection class IP67 / IP69K Can be used for linking connectors or as a Y-distributor Can be used as terminating plug Continuous protection from the housing to the cable Use in harsh environments Tamper-proof, tested assembly Can be used in bus systems The fields of application mentioned are, for example, agricultural and construction machinery, emergency vehicles, road construction machinery or the transport industry.Are you interested in these products?Ask your contact person directly for more information:To the contact details of the sales teamOnline product reques

Robust housing series from BOPLA

Mon, 07 Jun 21 00:00:00 +0200

With the new Polysafe housing series from Bopla, you can reliably protect your equipment from external impact. The vandal-proof and corrosion-resistant housing is particularly impact-resistant and resistant to external forces thanks to the use of glass-fiber-reinforced polyester. The anti-burglary system integrated into the housing provides additional security and also allows the Polysafe series to be used in public areas. All external parts of the housing are made of plastic. This, together with the protective cover inside, ensures optimum protection of the interior of your control cabinet against moisture and dripping water penetration.The doors can be hinged on both the right and left and can also be changed if necessary. The locking system offers a protection class of up to IP66.The enclosures are available in eight sizes from 300 x 250 x 140 millimeters to 800 x 600 x 300 millimeters (L x W x H). The enclosure series is available from stock in light gray, (similar to RAL 7035) and in special colors on request.Advantages of the Polysafe series at a glanceSuitable for indoor and outdoor useVandal-proofCorrosion resistantLightweight and robustTemperature resistant up to 960°CSelf-extinguishingBurglary protection180° door openingLock with double rod insertAvailable in 8 sizesEasy installation (external screw channels)Approx. 10 years maintenance freeExtensive range of accessoriesYou can find even more information about the new series at:Polysafe BrochurePolysafe WebsiteTechnical InformationPolysafe AccessoriesIf you have any further questions about the new Polysafe series from Bopla, please do not hesitate to contact your contact person in the office and we will be happy to prepare your personal offer.Your contact:To the contact details of the sales teamOnline product reques

Harting: Innovations at Han-Modular®

Mon, 31 May 21 00:00:00 +0200

Harting's Han-Modular® series combines power, data and signal transmissions that can be inserted into heavy-duty industrial connectors via a holding frame. The portfolio not only offers extreme diversity, but is also constantly being further developed. At the same time, it convinces with its simple modular principle.Harting meets the high dynamics in the market for energy storage systems, which requires more and more conditions, with the right solutions. Compared to the original 200A / 800V systems, the new 300 A module has a higher power density of up to 300A / 1200V. In addition, it is downward compatible with the proven 200 A variant and existing systems can be easily upgraded. Both the socket and the pin side are touch-proof.Integration of 10 Gbit/s Ethernet in modular connectorsIt is not only in the office sector that consumers are demanding higher transmission rates for data interfaces. For the industrial environment, Harting developed an M12 module that can be integrated into all common bus systems, such as Profibus, Profinet and CANbus. Two D- or X-coded connectors fit into a single module. This makes this solution not only more robust, but also more space-saving than the RJ45 alternative.New Han® Shielded Power ModulWith this module, the shield connection succeeds directly at the 360° shield plate and offers safety for every application. The three-pole module including a PE contact is connected to the shielding over a large area and offers the perfect solution for typical three-phase loads. In addition, there are two signal contacts that could monitor temperatures, for example. Harting tested the application on frequency-controlled three-phase motors in the laboratory, proving great performance and shortened installation times.Are you interested in thes products?Find out more directly from your contact person:To the contact details of the sales teamTo the Harting NewsOnline product request

NEW in our Portfolio: Trelleborg Cable Entry Systems

Tue, 25 May 21 00:00:00 +0200

Trelleborg is a world leader in engineered polymer solutions that seal, damp and protect critical applications. The electronic distributor Börsig from Neckarsulm has the official distribution rights for the high-quality, reliable and smart cable management systems of the Trelleborg Industrial Solutions business area. Trelleborg cable entry systems are used wherever protection against water, dust and moisture is needed. The products are used in panel construction segments, transportation technology, renewable energy generation, mechanical engineering, even in the food & beverages industry and in telecommunication infrastructure. Trelleborg and Börsig As an electronic distributor for electromechanical components, the family-owned company Börsig has been offering connectors, relays, switches, cables and other electrical components from premium manufacturers since 1969. The authorisation as official distributor for Trelleborg cable glands is a sign of appreciation and trust, and shows the confidence of the manufacturer Trelleborg in Börsig as a distribution partner. The products ideally complement the portfolio and enables Börsig to offer its customers even more options in personal and technical advice.What makes Trelleborg products stand outThe cable entry solutions are metal or plastic-reinforced systems for the routing of low and medium voltage cables as well as various wires and tubes. Due to their defined dimensions, the products can be used for a wide range of standard applications in industrial environments. Trelleborg solutions eliminate the need for separate seals or conduits, which is making them very easy to handle. The broad variety of the product portfolio offers countless benefits to ensure a simple, quick and flexible installation of the infrastructure.The cable grommets, cable entry plates and modular systems have a high level of protection to global market requirements and can be used almost without tools. Depending on the series, they meet the requirements of protection classes from IP54 up to IP67. This means, that they secure the function of your equipment also in demanding environmental conditions.Advantages at BörsigBörsig has a high storage capacity for Trelleborg products, so that high availability and short delivery times can be guaranteed. In addition, the products can be ordered from Börsig outside of packaging units and without a minimum quantity surcharge.Product overviewCable grommetsCable gland platesModular cable entry systemsSplitting entry systems For further questions about the TRELLEBORG cable entry systems, your contact persons from the internal sales department are at your disposal and will be pleased to prepare your personal offer.Your contact at Börsig:To the contact details of the sales teamOnline product request

C&K illuminated toggle switches - it's getting colorful

Tue, 18 May 21 00:00:00 +0200

With the ILT series, the renowned switch manufacturer C&K Switches launches the world's first "illuminated" toggle switch in a metal housing. The elegant design and the integrated light function make the switch a successful addition to the toggle switches currently available on the market.C&K stands for high quality and innovation and this is once again clearly visible here. But not only because of the appealing design, the ILT series is suitable for a wide range of applications. The switch is housed in a robust enclosure that can be used in harsh environments and can also be easily integrated into visually sophisticated designs.The ILT series makes control panel operation much easier, not only in darker environments, but also the switching status can be clearly seen at a glance. Some application examples include heavy equipment, industrial instruments, measuring devices, LED lights, elevators and escalators, medical equipment, security systems, telecommunications systems and more.The illuminated toggle switch is easy to install and available in the following six different colors: White Red Green Blue Yellow Purple Technical Data: Contact power: 20A Electrical service life: 10.000 Insulation resistance: 500V DC 1000M Ohm min Dielectric strength: 1 Minute 1500V AC Operating temperature: -25°C bis +85°C Contact resistance: 50m Ohm max A comprehensive portfolio of different switch types as well as other illuminated switches like pushbuttons can be found on the C&K manufacturer homepageYou can find even more information about the ILT series at:Data sheet ILT SerieClick here to watch the video about the ILT SeriesHomepage C&K Switches – ILT SeriesFor further questions about the new ILT series of C&K Switches, your contact persons from the internal sales department are at your disposal and will be pleased to prepare your personal offer.Your contact at Börsig:To the contact details of the sales teamOnline product request

SUPERSEAL PRO Connectors from TE

Thu, 06 May 21 00:00:00 +0200

Börsig GmbH is an authorized distributor for connectors for commercial vehicles (ICT) from TE Connectivity.The progressive electrification does not stop at the sales market of commercial vehicles. To cope with the upheaval in this important sector, the premium manufacturer TE Connectivity has found a simple and cost-effective solution, especially for applications with flying assembly (cable-to-cable).The 2-pole Superseal Pro scores not only with its low weight and high reliability, but also with its practical design, which enables simple plugging and unplugging of the connector.Advantages: TPA (Terminal Position Assurance) Pre-locking and improved design of the front seal The contact positioning assurance and the housing are installed. Therefore, no additional mounting is required. The front seal remains securely in position during the mating process. High degree of protection With end housing, degrees of protection of IP67/IP68/IP6K9K are achieved. Color and key coding of the TPA Different coating and wire size options for the contacts are available for different applications. In addition to color coding, various key coding options are also available to eliminate accidental mismating. MCON 1.2 SWS contacts are used MCON 1.2 SWS contacts provide a current carrying capacity of up to 17 A (80 °C) and the contacts are vibration resistant according to USCAR V2.

Börsig is the official distributor of C&K Switches

Wed, 05 May 21 00:00:00 +0200

Börsig is the official distributor of C&K SwitchesC&K offers a wide range of pushbuttons, rocker, toggle and rotary switches for a variety of applications. The high quality switches are recognized by electronic design engineers around the world, and almost a century after its foundation in 1928, C&K is still one of the best known and most trusted names in the E-Mech switch industry.The electronic distributor Börsig from Neckarsulm now holds the official distribution rights for the high-quality, robust and reliable switch solutions.C&K's products are used in the automotive, industrial, medical and consumer goods sectors, among others. More than 55,000 standard products and 8.5 million switch combinations are available for electronic product manufacturers. C&K and Börsig As an electronic distributor for electromechanical components, the family-owned company Börsig has been offering connectors, relays, switches, cables and other electrical components from premium manufacturers since 1969. The authorization as official distributor for the C&K switch solutions shows the manufacturer's confidence in Börsig as a sales partner. The products ideally complement the portfolio and so Börsig can offer its customers even more options in personal and technical advice.What distinguishes C&K ProductsWhether it's for a universal paddle switch assembly for a fire alarm, a compact start/stop button for a boat application, a switching mechanism for a surgical device with a specific actuation pressure, or a customized snap-action switch module with multiple positions for temperature adjustment, C&K delivers the best possible solution. C&K strives for complete customer satisfaction through continuous improvement and flawless performance. The company achieves this through a combination of automated assembly systems, ongoing training programs, internal audit teams, Six Sigma design methodology, process capability analysis, statistical process control and supplier quality initiatives.Advantages at BörsigBörsig stocks a large quantity of the worldwide known C&K switches, so that a high availability as well as short delivery times can be guaranteed. In addition, the products can be ordered from Börsig outside of packaging units and without a minimum quantity surcharge.Download press releaseProduct overviewBrochure

Now even better: The Han 1A connector series

Mon, 26 Apr 21 00:00:00 +0200

With this connector series, Harting enables a secure, robust connection in the smallest possible space, thus following the trend towards miniaturization.In contrast to the previous smallest series from the manufacturer Harting (size 3A), the new size 1A saves users up to 30% more space. This was achieved without sacrificing either the electrical characteristics or the ease of assembly; on the contrary!The modular system allows switching of the inserts to the respective housing and offers different possibilities of data, power and signal transmission. Due to the "Mate & Click" principle the mounting of the connector can be done in a few seconds. Currently the inserts are available with crimp and screw connection to offer an ideal solution.Typical applications include mechanical engineering and robotics, energy and traffic engineering, as well as automation and transportation.Your advantages at a glance: Compact design saves space Mate&Click principle saves time Robust, despite a low total weight High resistance to shock and vibration High chemical resistance Versatile use Colored coding elements available Inserts available for data, signal and power transmission Data transmission up to Cat. 6A IP65 protection possible To the video of the HARTING Han® 1AIf you have any further questions, please do not hesitate to contact your contact person in the office and we will be happy to prepare your personal offer.To the contact details of the sales teamOnline product request

Expansion of the HUBER und SUHNER Sucoflex 500 series

Mon, 19 Apr 21 00:00:00 +0200

The cable assemblies around the Sucoflex 570S are 70GHz assemblies with a long lifetime of more than 20'000 bending cycles. The Huber and Suhner Sucoflex 570S also offers excellent insertion loss (6.48dB) and phase (±3°) and amplitude (±0.05dB) stability during bending and movement.The Sucoflex 570S with an impedance of 50 Ohm operate in a temperature range of -55°C to +165°C and are ideal for use in a wide range of applications in laboratories and test centers.Features Applicable at frequencies up to 70 GHz Excellent insertion and return loss, phase stable High flexural fatigue strength Accurate and repeatable measurements Long service life - lower measurement costs Customized lengths in short delivery time Technical spezifications Sucoflex 570S Frequency: 70GHz Connector: 1,85mm Bending cycles: more than 20.000 Temperature range: -55 - +125 °C Impendance: 50 Ohm Return Loss: 16 db Bending radius: 25,4mm static Further frequency ranges of the Sucoflex 500S series and informationCatalogue microwave cablesBrochure Sucoflex 500If you have any further questions about the new Sucoflex 500S series, please do not hesitate to contact your contact person in the office and we will be happy to prepare your personal offer.To the contact details of the sales teamOnline product request

LEAVYSEAL connectors for the heavy-duty vehicle industry

Mon, 29 Mar 21 00:00:00 +0200

Börsig GmbH is an authorised distributor for connectors for heavy-duty vehicles (ICT) of TE Connectivity. This category also includes the connection solutions of the LEAVYSEAL connector series, which is characterised by different housing sizes, several connection types and a variety of configuration options for the heavy-duty vehicle industry. The products are available from stock.With reliable locking lever system and for harsh environments TE Connectivity, the world's largest manufacturer of connectivity solutions, offers connectors in the LEAVYSEAL series that are designed for harsh environments and thus meet the high demands of the commercial vehicle industry. To ensure stability and reliability, the LEAVYSEAL connectors are equipped with lever locking. Correct alignment as well as locking of the contacts is achieved by an integrated secondary locking mechanism. The latest additions to the series include housings with cable outlet opposite to the standard housing, which offer more flexibility in design-in, and housings with smooth cable inlet, which prevent damage to the cable sheath when sheathed cables are used. End housings, mounting adapters, sliding latches and protective caps for the mating area are available as accessories for the series.Flexible solution for a wide range of applicationsThe LEAVYSEAL connectors from TE Connectivity can be used flexibly. They are available in versions for 15, 18, 21, 22, 25, 26, 28, 29, 31, 39, 46, 62, 92 and 120 contacts. Furthermore, they allow the combination of different contact sizes in one housing. These sealed connectors with rectangular thermoplastic housings are suitable for flying leads, flange or PCB mounting. The products of the LEAVYSEAL series are mainly used in the fields of trucks, buses, off-road vehicles, construction machinery, agricultural machinery, dump trucks, forestry vehicles, yachts / sport boats and motorbikes.Technical properties: Temperature resistance from -40 °C to +140 °C Protection class IP67 and IP69K with cover Flammability class UL94 V-0 Voltage up to 42 V AC/DC Current up to 40 A Mechanical life up to 20 cycles (tin), up to 50 cycles (silver) or up to 100 cycles (gold) If you have any further questions about the LEAVYSEAL connector series from TE Connectivity, please do not hesitate to contact your sales representative who will be happy to provide you with a personal quotation.Video: Overview of LEAVYSEAL connectors and assembly instructionsDownload: LEAVYSEAL connection solutions catalogueTo the contact details of the sales teamOnline product request

Market launch NCC Subminiature Series 670

Mon, 15 Mar 21 00:00:00 +0100

Binder now offers the NCC subminiature series 670 with bayonet lock, especially for the applications and needs on the market. This series can also be called "the little sister" of the well-known 770 series. The compact design allows the use in special space requirements. More than 1000 mating cycles are guaranteed. Just like the larger version of the 770 series, the smaller version offers IP67 protection when mated. Unplugged, the 670 series achieves IP54. Due to the smaller design, the subminiature version has five poles, while the miniature 770 series is equipped with eight poles. Both series have a high resistance to external influences. The temperature range, for example, extends from -25 °C to +85 °C.For an optimal assignment of the connections, the connector is available in different colour variants (bayonet lock/sleeve). The new subminiature series from Binder has a wide range of applications and is suitable for all applications in confined spaces. The connectors are easy to handle, safe and offer a high number of mating cycles with perfect resistance to external influences.Technical data: Bayonet lock Cable aperture: Cable plug 3 - 5 mm Flange connectors with solder and dip solder contacts Flange parts unplugged IP54 IP67 when mated Can be screwed from front and rear 1000 mating cycles Available immediately!If you have any further questions about the new NCC Subminiature Series 670 from Binder, please do not hesitate to contact your sales representative who will be pleased to prepare your personal quotation.You can find more information at:https://www.binder-connector.com/en/products/subminiature-circular-connectors/bayonet-ncc-2Your contact:To the contact details of the sales teamOnline product requestDownload Binder brochure

The plug-in connection for energy storage systems

Mon, 15 Feb 21 00:00:00 +0100

A sustainable use of renewable energies, such as solar or wind can be achieved through the use of energy storage systems (ESS) only. With a time delay they enable the use of the energy generated as needed. For the optimal and modular construction of an energy storage system made of lithium-ion cells, Harting has developed the Han® S single-pole connector series, which can transmit rated currents of up to 200 amps and 1500 volts.Maximum safety with a great designThe red color for the positive pole and black for the negative pole and the additional mechanical coding prevent incorrect plugging in any case and offer advantages for service and maintenance. During assembly, the touch-proof contacts are inserted into the high-quality, 360° rotatable plastic housing and then screwed in place. The use of the Harting-typical locking clip is intuitively accessible.Compliance with all relevant UL standardsThe search for a high-current battery connector that meets the relevant UL and railway standards has finally come to an end. The Han® S is the first of its kind to meet the following standards, among others: UL 4128 for connectors in electrochemical applications UL 1973 for batteries in stationary applications and emergency power supply in vehicles UL 9540 for energy storage systems and accessories Relevant railway standards for shock and vibration safety The connector series is supplemented by a bus bar pin contact in red and black. This is used to connect the battery management module (BMS) in each storage cabinet to the control line in order to send status messages to the system control.If you have any further questions about the new Han® S series from the manufacturer Harting, please do not hesitate to contact your sales representative who will be happy to provide you with a personal quotation.To the contact details of the sales teamDownload: Brochure Han SDownload: Harting catalogueImagefilmOnline product request

EAO Series 56: Universal illuminated pushbuttons

Mon, 01 Feb 21 00:00:00 +0100

The manufacturer EAO, with Swiss origin, is the expert for "Human Machine Interfaces". These are products such as keyboards, push buttons, operating systems and units. The 56 series of buttons are used millions of times around the globe in mechanical engineering, in buses and in building control systems. Thanks to the large actuating surface, the all times illuminated LED ring, the user-specific laser symbols and a wide choice of colours for the front frame, the push-button ensures a high level of operating comfort. The characteristic click immediately provides unmistakable acoustic feedback. Actuation is additionally confirmed visually by the permanent LED illumination with red LEDs. The versatile areas of application are proven, among other things, by the long service life and the low installation depth of the product. The series is complemented by lever switches, warning sounders and warning flashing lights with the same and flexible design.Buttons with and without laser symbolsIf required, a variety of customised or standard symbols from the ever-expanding ISO 7000 standards database can be laser-engraved in black on the grey anodised aluminium or plastic actuating surfaces. Optionally, the so-called "push covers" are also available without a symbol, or with a one to three-line inscription.Your advantages at a glance: Versatile design with various laser symbols and front frame colours Intuitive operation with acoustic and visual feedback Low installation depth (27 mm incl. M8x1 standard connector) with IP67 Long and reliable life (>5 million switching cycles) Easy to see even in difficult lighting conditions thanks to LED colour selection Cable length and plug type freely selectable for connection type Modular design principle in the ordering process If you have any further questions about the Series 56 from the manufacturer EAO, please do not hesitate to contact your sales representative who will be happy to provide you with a personal quotation.To the contact details of the sales teamVideo about the seriesDownload: Brochure series 56Online product request

Phoenix Contact Crimphandy - mobile stripping & crimping

Mon, 30 Nov 20 00:00:00 +0100

With the introduction of its mobile stripping and crimping machine, the Crimphandy, Phoenix Contact has created a real highlight. It is the smallest and lightest device of its kind and thus represents a solution that the industry had already been waiting for. The device enables automatic stripping and crimping in the smallest space directly on place.DIN 46228-4 is the standard for wire end sleevesFor a high-quality crimp, correct forming and correct hardness of the sleeve is essential. For this reason, DIN 46228-4 was amended in March 2020 and a maximum hardness of 105 HV (Vickers hardness) was added to the standard. Phoenix sleeves had already met this criterion before the change.Why not crimp by hand? A standard manual crimping process takes on average eight seconds. The Crimphandy from Phoenix Contact can do this in just two seconds and always with the same, best quality crimps. The time saved by the device is enormous and avoiding errors is made easy by the automatic self-monitoring of the device.Further advantages of this crimping tool The Crimphandy is equipped with a powerful lithium-ion polymer battery that can be changed quickly. Up to 2000 crimping cycles are possible with one battery charge. The integrated magazine has space for 50 wire end sleeves in strip form, allowing work to be carried out without constant interruption. The cable remains resulting from stripping are collected in an extra container so that the switch cabinet or working environment remains clear. The tool is suitable for one cross-section each and is available for the sizes 0.5, 0.75, 1.0 and 1.5 mm².Technical data: Working cycle < 2 s Conductor insertion length min. 32 mm Crimping square crimp weight 0,43 kg Dimensions W x H x L 43 x 70x 205 mm If you have further questions about Crimphansy from the manufacturer Phoenix Contact, please do not hesitate to contact one of our sales representatives. We will be glad to assist you with a personal offer.Mobile stripping and crimping machine from Phoenix ContactTo the contact details of the sales team Online product request

Hummel metal cable glands now also lead-free

Fri, 13 Nov 20 00:00:00 +0100

Cable glands made of brass may currently contain a maximum of four percent lead. This is defined in an exemption regulation of the RoHS directive. This regulation will probably expire in July 2021.Hummel is one step ahead and already offers a lead-free version with consistent quality.The proven and valued properties such as high impact resistance, high sealing, wide temperature range and safe strain relief remain unchanged.The familiar part numbers remain the same, only an addition of the two letters "LF" (Lead Free) indicates the lead-free version. The screw connections themselves are also labeled "LF" so that they cannot be confused with the standard.Future-proof productsHummel thus secures your products for the future. Due to the complete elimination of lead, these cable glands are much more environmentally friendly and save resources. The availability of the HSK-M M 12 to M 63 cable glands is therefore guaranteed for the future, even if the legal situation changes next year.To the sales team contact detailsOverview of Hummel cable glandsOnline product request

Binder: Upgrading of the HEC series 696

Thu, 05 Nov 20 00:00:00 +0100

The world-renowned connector manufacturer Binder has expanded its product portfolio. The 696 series of the HEC (Harsh Environment Connector) connector family has been supplemented by flange and cable versions with built-in protective tube adaption. These robust circular connectors from Binder were already included in the product range of the distributor Börsig some time ago.Wide range of applicationsThe circular connectors of the 696 series - HEC family are used in the following areas of application:outdoor electronic systemsmobile factory technologyagriculture and construction industry, as well as other areas where high pressure cleaners are usedtraffic guidance systemsprocess engineering plantswater treatment plantsrecycling technologyTechnical product features locking type: bayonet quick lockconnection type: Crimp contactsconnection cross section: 0.14 mm2 - 6 mm2protection class: IP67 to IP69Krated voltage: up to 600 Voperating current: up to 32 AVDE and UL approvalresistant to UV lighttemperature resistance: -40 °C to +100 °Cmating cycles: up to >1.000Your advantages at a glance robustnessresistance to harsh conditionsbuilt-in protective hose adaptation possiblevibration-proof connectionhigh reliabilityIf you have any further questions about the 696 series - HEC family from the manufacturer Binder, please do not hesitate to contact our sales team and they will be pleased to provide you a personal quotation.To the contact details of the sales teamDownload: Catalogue of the 696 seriesTo the Binder News Catalogue 2020Online product request

Han DDD industrial connectors from Harting

Thu, 22 Oct 20 00:00:00 +0200

The manufacturer Harting is a worldwide leading supplier of industrial connection technology for the three areas "Data", "Signal" and "Power". The new Han DDD contact inserts are an innovative addition to the Han series and are characterized by a very high contact density with small dimensions. With the help of the Han DDD inserts, the installation space in classic control panels can be optimized. The extension of the creepage distances by build-ups between the contacts, an improved PE connection which provides more insulation body area and the shifted arrangement of the contact pockets help to achieve a higher power density.Areas of application: Mechanical Engineering Robotics Automation Technical product features Very high contact density Connection type: Crimp connection Conductor cross section: 0.14 ... 2.5 mm² Rated current: 10 A Rated voltage: 250 V Limit temperature: -40 ... +125 °C Mating cycles: ≥ 500 Your benefits at a glance Space-saving solution Assembly time and costs are reduced Safe power and signal transmission Optionally with gold and/or silver contacts If you have any further questions about the new Han DDD contact inserts of the manufacturer Harting, please do not hesitate to contact our sales team and they will be pleased to provide you a personal quotation.To the contact details of the sales teamDownload: Catalogue excerpt of the Han DDD contact insertsOnline product request

Compact signal connector: 2.5 mm pitch SDL connector from TE Connectivity

Mon, 19 Oct 20 00:00:00 +0200

The manufacturer TE Connectivity recently expanded its product portfolio to include the miniaturized, sealed 2.5 mm SDL connectors to meet today's design requirements. The Signal Double Lock (SDL) connector system includes pin and socket housings for cable connection. The new water- and dustproof 2.5 mm SDL connectors offer a space-saving solution and are available in both wire-to-wire and wire-to-board versions. The distributor Börsig has added these products to its product portfolio.Areas of application The 2.5 mm SDL connectors can be used in many different areas, such as Small and large household appliances Industrial control systems Garage door opener Security Systems Lighting Lawn Mower Automats Technical product features: Waterproof according to IP67 protection class Space-saving 2.5 mm grid Nominal voltage: 250 V Temperature resistance: from -30 °C to +105 °C Rated current: up to 3 A UL approval, CSA certified and tested and approved by TÜV Your benefits at a glance: Solution for confined spaces Reliable signal transmission Easy and safe mounting of the contacts due to the snap-in locking construction (hearable click when positioning the contacts) Flexible design options Reduced assembly errors thanks to the polarized connections If you have further questions about the 2.5 mm SDL connector from the manufacturer TE Connectivity, please do not hesitate to contact one of our sales representatives. We will be glad to assist you with a personal offer.To the contact details of the sales teamDownload: Product flyer about the 2.5 mm SDL connectorsOnline product request

Superseal Pro connectors for commercial vehicles

Mon, 28 Sep 20 00:00:00 +0200

To meet the commercial vehicle market's demand for more efficient and powerful solutions, the market-leading connector manufacturer TE Connectivity has developed a new generation of sealed two-pole connectors. The new Superseal Pro series delivers high added value for cable-to-cable and cable-to-device connections. Application areas The two-pole Superseal Pro connectors can be used in vehicle frames, valves, sensors and lighting. They are suitable for road vehicles (trucks, light trucks & buses) as well as industrial applications and household appliances.Technical product features High protection class: IP67 / IP68 / IP6K9K (with protective housing) Easy installation with pre-mounted, color-coded TPA options Fire protection class: UL 94 V0 Current carrying capacity: up to 17 A Maximum voltage: 12 V / 24 V DC High vibration resistance according to USCAR V2 Operating temperature: -40°C to +125°C Your advantages at a glance Designed for flying assembly High reliability Practical design User-friendliness Cost-effective solution If you have any further questions about the Superseal Pro connectors from the manufacturer TE Connectivity, please do not hesitate to contact our sales team and they will be pleased to provide you a personal quotation.To the contact details of the sales teamDownload: Brochure of Superseal ProDownload: Infographic of Superseal ProOnline product request

TE Connectivity – Hirschmann antennas for outdoor use

Fri, 28 Aug 20 00:00:00 +0200

The Hirschmann Mobility (formerly Hirschmann Car Communication) product brand from the manufacturer TE Connectivity has held a leading global position in antenna technology for mobile communication for almost 100 years. The electronic distributor Börsig has expanded its product portfolio to include additional Hirschmann antennas with various applications, which are now available from stock.Product characteristics and areas of application: Automatic antenna: HIT AUTA 2050 Type: Car radio retractable antenna [FM/MW] Dimensions: 90 mm x 325 mm x 70 mm Weight: 975 g Frequency range: AM: 0.15 - 6.5 MHz / FM: 87 - 108 MHz Power consumption: 3A max. | 12V Protection class: IP 44 Can be used up to -30° Resistant chrome coloration Roof antenna: RDA 015-1450 RD/S Type: FM antenna Dimensions: 95 mm x 55 mm x 39.7 mm Weight: 151 g Frequency range: AM: 0.535 MHz - 1.705 MHz / FM: 87.5 MHz - 108 MHz Power consumption: 35 mA | 0.1 VDC Protection class: IP 69 Amplifier AM: 0 dB FM: 8±2 dB Features FLEX antenna rod Magnetic antenna: CEL 70 26 RD M Type: FM/GSM antenna [LTE] Dimensions: ∅ 30 mm x 91.4 mm Frequency ranges: - LTE (low) 698 to 862 MHz, - LTE (high): 2305 to 2690 MHz, - GSM 850: 824 - 894 MHz, - GSM 900: 880 - 960 MHz, - GSM 1800: 1710 - 1880 MHz, - GSM 1900: 1850 - 1990 MHz, - UMTS: 1920 - 2170 MHz Impedance: 50 Ohm Protection class: IP 66 Has a magnetic attachment Usable up to -40 °C Your advantages at a glance: Hirschmann Mobility products available from stock You can order outside the packaging units Growing portfolio of Hirschmann antennas Contact to the sales team If you have any further questions about Hirschmann antennas from the manufacturer TE Connectivity, please do not hesitate to contact our sales team and they will be pleased to provide you a personal quotation.To the contact details of the sales teamDownload: Datasheet for automatic antenna HIT AUTA 2050Download: Datasheet for roof antenna RDA 015-1450 RD/SDownload: Datasheet for magnetic antenna CEL 70 26 RD M FMEOnline product inquiry

HUMMEL VariaPro – Four for every application

Wed, 12 Aug 20 00:00:00 +0200

For many years HUMMEL AG has produced a wide range of cable glands which are characterised by high quality and reliability. The manufacturer's VariaPro product family includes four cable glands equipped with different features - VariaPro Rail, VariaPro Temp, VariaPro FKM, HSK-INOX-HD-Pro - which are designed for markets with high requirements.Product features and areas of application: VariaPro Rail Use in the railway sector Meets the fire protection standards DIN EN 45545-2 and 45545-3 For all trains on the European network Integrated anti-twist protection during cable installation Material: nickel-plated brass Protection class: IP 68 - 10 bar VariaPro Temp Withstands extreme temperatures: from -60 °C to 200 °C Designed for both arctic outdoor use and industrial high temperature applications Large clamping range due to reduction insert Material: nickel-plated brass Protection class: IP 68 - 10 bar VariaPro FKM Resistant to acids, bases and other chemicals Ideal for the process industry Suitable for the chemical and pharmaceutical industry and other applications with direct environmental influences Material: nickel-plated brass Protection class: IP 68 - 10 bar HSK-INOX-HD-Pro Used in the food, chemical and pharmaceutical industries EHEDG certified product Successful VDMA riboflavin test Halogen and phosphate free Suitable for high pressure cleaning Material HD housing: INOX 1.4404 Your advantages at a glance: Fulfilment of special requirements through special construction Robust design and slim structure Available in different sizes Large clamping ranges High protection class Integrated EMV connection If you have any further questions about cable glands for special applications from the manufacturer HUMMEL, please do not hesitate to contact our sales team and they will be pleased to provide you a personal quotation.To the contact details of the sales teamDownload: Flyer of the product family VariaProDownload: Extract from the catalogue of cable glands for special requirementsOnline product request

Binder: M12-A cable plug and socket with plastic threaded ring

Wed, 01 Jul 20 00:00:00 +0200

Binder is a worldwide known manufacturer of industrial circular connectors. The new overmoulded M12-A cable plugs and sockets (763 series) are mainly used in automation technology and complement the 713 series. The distributor Börsig has now added these articles to its product portfolio.As a low-cost alternative to the stainless steel threaded ring, the M12-A products are equipped with a plastic threaded ring (PA), which guarantees robustness according to the manufacturer. The vibration-resistant crimp contacts ensure reliable signal and data transmission. The overmoulded and ready-to-connect connectors are available with PUR cable.Technical characteristics of the 763 series: UV-resistant material Overmoulded and ready-to-connect cable sets Temperature resistant Cable diameter: 4.3 mm (3-pole), 4.7 mm (4-pole), 5.0 mm (5-pole), 6.0 mm (8-pole), 6.5 mm (12-pole) Protection class: IP67 / IP68 Contact surface: Au (gold) Your advantages at a glance: Simple assembly Available in different versions High protection class Robustness Secure data transmission Long mechanical life: >100 mating cycles If you have further questions about the M12-A cable plug and socket from the manufacturer Binder, please do not hesitate to contact one of our sales representatives. We will be glad to assist you with a personal offer.To the contact details of the sales teamDownload: Data sheet fo the M12-A cable plug and socketOnline product request

HUMMEL: Standard cable glands with O-ring

Tue, 23 Jun 20 00:00:00 +0200

The manufacturer HUMMEL owns a huge portfolio of cable glands for industrial applications. These glands are offered in different sizes and variants. The distributor Börsig has stock of the series HSK-K with pre-assembled O-ring from the manufacturer HUMMEL. From now on you have the possibility to order these products also outside the packaging units, in smaller quantities.Technical characteristics of the series HSK-K: RoHS and REACH / SVHC compliant Free of conflict materials Halogen and phosphorus free Fire protection class V0 according to UL 94 Vibration protection of the coupling nut Protection class IP 66 and IP 68 10 bar to DIN EN 60529 Protection class IP 69K according to DIN 40050-9 Your benefits at a glance: Different sizes and variants High protection class With pre-assembled O-ring Available outside the packaging units If you have further questions about the series HSK-K from the manufacturer HUMMEL, please do not hesitate to contact one of our sales representatives. We will be glad to assist you with a personal offer.To the contact details of the back officeDownload: Catalogue of the Hummel cable glandsOnline product request

RF Video Overlay – Stable network supply with high data rates for your home office

Mon, 18 May 20 00:00:00 +0200

Difficulties in the home officeIn the days of the Corona virus and home office, the digital communication network at home is heavily loaded: Skype conferences, webinars and other online meetings require high and fast data capacities. In most households, several family members use different online portals at the same time, which leads to a reduction in the data rate. This results in further bottlenecks - in the worst case, a breakdown in the communication network.To avoid the problems described, HUBER+SUHNER recommends a solution from its subsidiary, BKtel: the concept of RF video overlay offers end customers digital and analog television with a data rate of several gigabits per second.About HUBER+SUHNER BKtelHUBER+SUHNER BKtel develops, produces and implements active and passive components for broadband networks and has extensive know-how in the areas of fiber-to-the-home (FTTH), hybrid fiber coax (HFC) and distributed access architecture (DAA) as well as in optical signal processing (optical converters, amplifiers and fiber lasers). The company was taken over by HUBER+SUHNER in September 2019.About the concept of RF-Video-OverlayRF-Video-Overlay is a system solution that outsources the transmission of the TV signals in order to ensure the necessary capacities for other simultaneous high-peak data requests. Fiber optic networks are perfect for this transmission.Since the transmission with light waves goes through without loss of quality, a transmission of over 100 km is possible. For the conversion of the optical signals, HUBER+SUHNER BKtel has developed the XON terminal series, which can be equipped with the required termination unit (TV and / or Internet) depending on the customer's requirements.Your advantages at a glance: Relieve traffic Reliable and high quality TV broadcast Easy installation Adaptable to any network size Low operating costs Customized solutions Learn more about the concept of RF-Video-OverlayDownload: Flyer about RF-Video-Overlay-solutionsDownload: Flyer about FTTH-solutionsTo the contact to the sales team

M16 connector with X-coding from Binder

Tue, 05 May 20 00:00:00 +0200

The manufacturer Binder offers M16-X connectors of the 415 series for sensor-based and automated production facilities. Using these connectors, high transmission rates (up to 10 Gbit/s) can be achieved. In addition to cable plugs and sockets, the Binder series 415 also includes built-in sockets that can be screwed on from the front (rear wall mounting). The series is provided with protection class IP67.Areas of applicationThanks to the robust construction and the high degree of protection, the M16-X connectors have a wide range of uses for industrial sensors. They are suitable for both indoor and outdoor applications.Technical characteristics: Connector lock: screw Connection type (cable): insulation displacement Connection type (flange): dip solder Material contact: CuZn (brass) Contact surface: Au (gold) Cable passage: 5.5-9 mm Rated current (40 °C): 0.5 A Rated voltage: 50 V (AC) / 60 V (DC) Your benefits at a glance Degree of protection: IP67 Mechanical life: >100 mating cycles High environmental resistance Robust design Data transfer rates up to 10 Gbit/s If you have any further questions about the M16-X series from the manufacturer Binder, please do not hesitate to contact one of our sales representatives. We will be glad to assist you with a personal offer.To the contact details of the sales teamDownload: Data sheet for the M16-X flange socketDownload: Data sheet for the M16-X cable connectorDownload: Data sheet for the M16-X cable socketOnline product inquiry

Expansion of the rail and bus antenna portfolio at HUBER + SUHNER

Mon, 20 Apr 20 00:00:00 +0200

The cable and component manufacturer HUBER + SUHNER has expanded its rail and bus antenna portfolio by taking over Kathrein SE. With this step, the manufacturer strengthens its market leader position in the field of mobile communication for public transport. Börsig has added these products to its product range.HUBER + SUHNER has been developing and producing directional and omni-directional antennas for over 20 years. Its portfolio includes products for both indoor and outdoor-wireless connections.Your advantages at a glance:• Wide range of possible applications • Small space requirement • High performance • Developed for harsh environmental conditionsProduct features:• Frequency range from 1 MHz to 6 GHz • 5G solutions available • Robust design • Customized solutionsMore information about the antennas from HUBER+SUHNERDownload: Flyer for 5G solutionsDownload: Flyer for special communicationIf you have further questions about the antennas from the manufacturer HUBER+SUHNER, please do not hesitate to contact one of our sales representatives. We will be glad to assist you with a personal offer.To the contact data of the sales teamOnline product request

"3 in 1" hand tool from Glenair

Thu, 16 Apr 20 00:00:00 +0200

The robust grounding systems from the manufacturer Glenair are suitable for leading off electrical currents into the ground.New hand tool for 3 sizesThe PMTXX hand tool can be used to process a wide variety of grounding expansion bolts in sizes M6, M8 and M10. By matching colour codes on the changeable lugs and sleeves (on the retainer of the earthing bolt) as well as on the adjusting wheel of the permanently mounted hydraulic cylinder, the hand tool can be easily adjusted, depending on the size of the required earth connection. The hydraulic tool is one-handed and easy to operate.Technical facts at a glance:• earthing: M6 - M8 - M10 • Weight: 1,4 kg • Dimensions: 192 x 52 x 207 mm • Tractive force: 10 - 25 kN • Colour code M6: yellow • Colour code M8: blue • Colour code M10: greenYour advantages at a glance:• One hand tool for different sizes • Simple calibration and adjustment settings • Can be used with only one hand • Automatic unlocking after reaching the set traction force with an audible clickIf you have further questions about the PMTXX Hand tool from the manufacturer Glenair, please do not hesitate to contact one of our sales representatives. We will be glad to assist you with a personal offer.To the contact data of the back officeOnline product request

Terminal Strip Cutter from TE Connectivity

Wed, 08 Apr 20 00:00:00 +0200

Making loose contacts Loose contacts are always required for the production of prototypes, wiring harnesses in small quantities and for repair work. When you buy contacts on reels, it is very convenient to have the right cutting tool to make single contacts safely and easily. Traditional cutting tools, such as tin snips or side cutters, often do not cut the contacts cleanly (flush) and / or create a sharp burr that can even damage the wire insulation. TE Connectivity's new hand tool solves this problem. The pliers have been developed so that they can cut individual contacts from strips and coils with high accuracy.Easy to use In just a few simple steps you can make the necessary three settings.The adjustment of the height with two screws of a vertically adjustable plate, the depth with two screws on the horizontally adjustable side block and the contact position via a limit screw. With these setting options, you can use this hand tool to separate hundreds of different contacts from the side carrier strips.Application areas:The hand tool is suitable for applications with low requirements for loose contacts, such as prototype construction Cable assemblies in smaller quantities repairs And in a lot of areas, like among others in industrial applications in apparatus and equipment construction in aerospace applications in marine applications in the automotive industry Your advantages at a glance: Ergonomic design with good grip many different contact types can be processed Light weight of the hand tool Manual feeding of the carrier strips Good price-performance ratio with simple operation and user-friendliness Please note that this tool is only used to cut the contacts. The appropriate crimping hand tool for the different contacts must be ordered separately.If you have any further questions about the Terminal Cutter from TE Connectivity, our contact persons from the back office will be happy to help and prepare a personal offer.To the contact details of the office staffDownload: Datasheet Terminal Strip CutterOnline product request

Snap-in-connectors of Binder series 620 and 720

Tue, 07 Apr 20 00:00:00 +0200

The manufacturer Binder is one of the world's leading suppliers of circular connectors. Börsig now offers fast availability of the Binder series 720 and 620 to its customers.The products of the miniature series 720 and the subminiature series 620 are equipped with snap-in locking, which enables simple and secure connections. Thanks to the IP67 standard, these connectors are also suitable for rough environments: they are dust-protected and waterproof for a certain period of time.Technical characteristics of the 620 series:• Snap-in lock • 3-6 pin • Degree of protection: IP67 • Solder connection • Models molded onto the cable • Diameter: 11.5 mm • Color versionsTechnical characteristics of the 720 series:• Snap-in lock • 3-12 pin • Degree of protection: IP67 • Solder / dip solder connection • Diameter: 26 mm • Color versionsIn 2018, Binder added a double distributor to the 720 series. This product also has a snap-in lock to ease the handling in limited space.The manufacturer recently expanded the product range of the 720 series again: the new 4- and 6-way distributors with snap-in locking contributes to the fact that several devices can be connected via a single line.Binder 620 series data sheetBinder 720 series data sheetDatasheet of the double distributor of the 720 series from BinderDatasheet of the multiple distributor of the 720 series from BinderTo the contact details of the sales teamOnline product inquiry

Usual service although Corona

Wed, 18 Mar 20 00:00:00 +0100

Due to the expansion of the coronavirus, Börsig GmbH has taken a variety of measures in order that we can still provide you with the usual service and guarantee delivery of your ordered products.Keeping our availability by mail and telephone To ensure that our colleagues can still be contacted, some of our colleagues are working in the HomeOffice. This also includes our colleagues in our offices in Soest, Freiberg and Vienna.Product availability Due to our huge storage area, we are able to provide short-term product and delivery availability for a wide range of products.In addition, we are in active communication with our manufacturers to get information about their production and delivery situations. If open customer orders should be affected by such restrictions, we will inform you about it as soon as possible.Keeping our delivery dates to you So far our supply chain has not been affected by the virus. To take care of this, our logistics department is working in several shifts from now on to make sure that we can deliver to you on time. Further internal measures that have been taken and implemented are: Expulsion of third parties from the company building Establishment of restricted zones in the storage area Postponement of customer and supplier deadlines Travel restrictions of our employees Separate break times and keeping the table limits in the break rooms Installation of hygiene stations Contact to sales team

Phoenix Contact: Crimptool – CRIMPFOX DUO 10

Mon, 02 Mar 20 00:00:00 +0100

The high-quality crimp tool from Phoenix Contact covers a wide range of cable cross sections. TWIN sleeves and cross sections from 0.14 mm² to 10 mm² can be processed with the tool. Due to the rotating die and convenient handling, crimping work in hard-to-reach areas is possible. The tool is also available in a set. The tool bag is equipped with the crimping pliers, a matching wire stripper with integrated wire cutter, an assortment box for wire end ferrules with an insulating collar and an assortment box with TWIN wire end ferrules.Ergonomic designThanks to its balanced weight and ergonomically designed handles, the crimping pliers fit comfortably in the hand. In its category it is the most compact and lightest on the market.Rotating dieThe colour-contrasting release button allows the die to be turned in the desired insertion direction (front or side).Process-safe handlingThe crimping mechanism is self-adjusting and ensures clean crimping results with only one crimp zone for all sizes. The crimping process is secured by the locking mechanism, which can be manually unlocked if necessary.If you have any further questions about CRIMPFOX DUO 10 brand products from Phoenix Contact, our contact persons from the office are available to you and will be happy to provide you with a personal offer.Contact to sales Teams Online product requestDownload data sheet

Hirschmann Mobility now available at Börsig

Fri, 17 Jan 20 00:00:00 +0100

The product portfolio available at Börsig includes: - cellular antennas - broadcast and GNSS antennas - satellite antennas and - short range antennas.Hirschmann Mobility (former Hirschmann Car Communication) has been a global leader in the field of transmission and reception technology for mobile communication for more than 90 years.Possible fields of application are:- Automotive - Commercial, agricultural and special vehicle construction - Mechanical engineering - Industrial environmentAbout Hirschmann Mobility (former Hirschmann Car Communication)Hirschmann Mobility pays particular attention to meeting the always increasing customer requirements. The company achieves this through its own research and development work, modern testing and measuring systems and flexible development processes.5G antennas complete the product portfolio. Customers also appreciate the robustness, performance and reliability of the products.If you have any further questions about products from the HIRSCHMANN MOBILITY brand from TE Connectivity, our contact persons from the sales team will be happy to help and make you a personal offer.Contact to the Börsig sales teamOnline product request

VariaPro FKM cable gland: Resistant to chemicals

Mon, 09 Dec 19 00:00:00 +0100

The cable gland VariaPro FKM is the latest member of the VariaPro family from HUMMEL, which was specially developed for the process industry and for applications with direct environmental influences.Resistant to acids, bases and other chemicals The robust VariaPro FKM cable gland is used in applications in which the environment is dominated by aromatic and chlorinated hydrocarbons, mineral oil, petrol, oxygen, ozone or water vapour. The sealing inserts and the O-rings of the cable glands consist of the material FKM (fluorocarbon / Viton® / fluorinated hydrocarbon), which has proven itself in numerous tests and which is particularly resistant to acids and chemicals. In addition, the screw connection convinces with protection class IP68 and is therefore dust- and waterproof up to a pressure of 10 bar.The installation is very simple, as the EMC connection is already integrated in the cable gland as standard. In addition, the slim structure can also be used in narrow applications.Fields of application: Chemistry, pharmaceutical industry and biotechnologyYour key benefits:• High resistance to acids, bases and chemicals • Simple installation incl. integrated anti-twist protection • Integrated possibility for EMV connection • Space-savingTechnical product features:• Continuous service temperature: -20 °C to 180 °C • Molded seal and O-ring: FKM • Material: nickel-plated brass • Protection class: IP68 up to 10 bar • Sizes: M20, M25, M32 and M40 • Clamping ranges: 7.0 mm (M20) to 32.0 mm (M40)If you have any further questions, our contact persons for the products of the manufacturer HUMMEL will be pleased to be at your disposal and to prepare a personal offer for you.Contact to our service teamDownload: Data sheet VariaPro FKM – Hummel AGOnline request for products

HFT5000 Raychem shrink tubing for excellent protection against abrasion

Tue, 26 Nov 19 00:00:00 +0100

The heat shrinkable fabric tubing Raychem HFT5000 of the manufacturer TE Connectivity resists heavy burdens and is perfectly suitable for harsh environment applications.The fabric tubing consists of a halogen-free polyethylene/polyester construction, which is highly flexible. Due to the high flexibility HFT5000 is especially suitable for the easy and compliant installation onto awkward substrates such as bent hoses. The individual fibres are closely interwoven with each other. By this the fibres provide an excellent abrasion resistance and prevent the ingress of water, heat and humidity into the shrinkable tubing.The fabric has a shrinking ratio of 2:1 at relatively low shrink temperature and is therefore excellently suitable for heat-sensitive substrates.Areas of application: industry, automotive, aerospace, shipbuilding, defence, railwayYour key benefits at a glance: Extraordinary abrasion and cutting resistance Highly flexible and halogen-free Resistant to fuel, oil, water, dust, battery acid, battery fluid, frost protection and other common liquids Suitable for heat-sensitive substrates No fraying when cutting Technical product features: Shrink ratio: 2:1 Operating temperature: -40°C to 125°C Processing temperature: 80°C to 110°C Size range (not shrunk): 6 … 100 mm Approvals: RoHS compliant, ELV compliant, UL (E199379) certified If you have any further questions about Raychem products from TE Connectivity our service team will be pleased to be at your disposal and to prepare a personal offer for you.Contact to the service teamDownload: Data sheet Raychem HFT5000 – TE ConnectivityOnline product request

Fiber optic connectors from Bulgin

Mon, 28 Oct 19 00:00:00 +0100

Bulgin's 4000 Series (Simplex LC) and 6000 Series (Duplex LC) circular connectors provide high quality and reliable fiber optic solutions. Applications include marine, construction, aerospace and rail, server room and FTTx (fiber to the x) applications.The fiber optic connections are IP66, IP68 and IP69K certified and also offer water resistance up to a depth of 10 m (tested over 2 weeks).Data transmission with light pulses (photons) via fiber optic cables is much faster than with conventional copper cables with electrons (electrical signals). The safety aspect can also be improved by fiber optics, because intercepting or hacking is much more complex compared to other cabling types.Your advantages at a glance: Temperature range: from -25° to 70°C Protection class: IP66, IP68 and IP69K UV-resistant Immersion to water depth of 10 m possible Suitable for long-term outdoor use Safety lock prevents accidental loosening of the plug connection Contact to the service teamMore information about fiber optic connectorsOnline product request

HIRSCHMANN Antennen von TE Connectivity

Thu, 17 Oct 19 00:00:00 +0200

Der Electronic-Distributor Börsig aus Neckarsulm erhält vom weltgrößten Hersteller von Anschlusslösungen – TE Connectivity – den offiziellen Distributionsauftrag für Produkte von HIRSCHMANN MOBILITY (ehemals Hirschmann Car Communication). Die Firma HIRSCHMANN MOBILITY ist ein weltweit führender Anbieter, wenn es um Antennentechnologie für mobile Kommunikation geht.Das ProduktportfolioDas Produktportfolio, welches ab sofort bei Börsig erhältlich ist, umfasst u.a. Mobilfunkantennen, M2M und Telematiksysteme, Broadcast- und GNSS-Antennen. Durch die Autorisierung wird die enge Geschäftsbeziehung beider Partner weiter ausgebaut. TE Connectivity autorisiert Börsig für HIRSCHMANN AntennenAls Electronic Distributor für elektromechanische Bauteile bietet das Familienunternehmen Börsig seit 1969 Steckverbindungen, Relais, Schalter, Kabel sowie weitere elektrische Bauelemente von Premium-Herstellern an. Diese weitere Autorisierung nebst der DEUTSCH und Entrelec Autorisierung ist ein Zeichen von Wertschätzung und Qualität und zeigt das Vertrauen des Herstellers TE Connectivity in Börsig als Vertriebspartner. Über die HIRSCHMANN ProdukteMit einer Erfahrung von mehr als 90 Jahren haben sich die Produkte von HIRSCHMANN MOBILITY am Markt etabliert. Die Kunden schätzen die Leistung, die Robustheit sowie die Zuverlässigkeit der Produkte. Den steigenden Kundenansprüchen kann Hirschmann souverän durch seine eigene Forschung und Entwicklung, den moderneren Prüf- und Messanlagen sowie den flexiblen Entwicklungsprozessen gerecht werden. Zu den typischen Einsatzgebieten zählen die Automobil- und Nutzfahrzeughersteller, Automobilzulieferer, Industrieunternehmen sowie der Aftermarket-Fahrzeugzubehörhandel.Vorteile bei BörsigDer Electronic-Distributor Börsig hat sich bereits Produkte von HIRSCHMANN MOBILITY aufs Lager gelegt, so dass eine Verfügbarkeit sowie kurze Lieferzeiten garantiert werden können. Darüber hinaus Börsig verfügt über eine hohe Lagerkapazität weiterer Artikel von TE Connectivity. Zusätzlich können die Produkte außerhalb von Verpackungseinheiten sowie ohne Mindermengenaufschlag bei Börsig bestellt werden.Weitere Informationen zu HIRSCHMANN MOBILITY

HARTING Han® 1A connector series

Mon, 14 Oct 19 00:00:00 +0200

Harting has developed the Han® 1A industrial connector to meet the increasing demands of smaller drives and smaller devices. This connector is characterized in particular by its compact and robust design. It is space-saving and easy to assemble. The connector's versatility results from its modular design and the use of existing contacts for data, power and signal transmission creates a very flexible system for a wide range of applications. Contact inserts are available with screw or crimp terminals to provide an ideal solution. In addition, the Han® 1A features the simple "Mate & Click" principle to reduce assembly time. This means that the connector can be assembled within seconds without tools. Typical areas of application are e.g:• Mechanical engineering and robotics • automation • Energy and traffic engineering • transportation Your advantages at a glance:• Space-saving, due to the robust and compact design • Time saving thanks to the "Mate & Click" principle • Low total weight • Versatile use • Coloured coding elements available • High shock and vibration resistance • High chemical resistance • Inserts for data, signal and power transmission available • Data transmission up to Cat. 6A • IP65 Protection class possibleContact to the service teamVideo of the HARTING Han® 1A Online-Request

High performance cables: SUCOFLEX® 500

Mon, 07 Oct 19 00:00:00 +0200

The SUCOFLEX® 500 assemblies from HUBER+SUHNER are especially used in measuring and testing technology. The measuring cables are flexible and easy to use. Simultaneously they are characterized by their optimal phase and amplitude stability if exposed to flexure, movement, temperature and tensile stress.Strong, resistant and durable measuring cablesThe pre-assembled cables convince due to their excellent return loss and insertion loss up to 50 GHz frequencies. Furthermore they’ve got a very long service life, because the cables withstand more than 100.000 bendings without a quality loss. The durability of SUCOFLEX® 500 cables ensure a smooth test run and increase the cost efficiency. Thanks to the unique design the measuring cables are rugged against twisting, squashing and kinking as well as resistant against abrasion, humidity and dust.Members of SUCOFLEX® 500 family:SUCOFLEX® 526V: SUCOFLEX® 526V is the first member the of SUCOFLEX® 500 family and it’s worldwide the only VNA microwave cable with a max. 50 ppm phase variation at a temperature scale between +15 and +30 °C. Additionally it convinces with the best phase and amplitude stability for exact and stable measurements also in critical laboratory conditions.SUCOFLEX® 526S: SUCOFLEX® 526S is worldwide unique for its great phase and amplitude stability during bending as well as for its excellent return loss and insertion loss. The second member of the product family is suitable for applications such as test rack systems, and bench-top, field or RF production tests with high throughput rates.SUCOFLEX® 550S: The latest member of the SUCOFLEX® family got a higher transmission performance as well as an optimized design for even more durability.Application areas of SUCOFLEX® 500 family: Benchtop testing HF production testing Automated test equipment Vector network analyzers (VNAs) Scalar analyzers Portable test equipment HF module testing High speed digital testing (HSDT) Contact to the service teamData sheet of SUCOFLEX® 500 – HUBER+SUHNEROnline product request

Redesigned emergency stop switches of EAO series 84

Fri, 09 Aug 19 00:00:00 +0200

Emergency stop switches of EAO series 84 are proven in the market for many years. They mark up to the most important safety controls in mechanical engineering and process automation and comply two important protective functions: Personal protection as well as protection of machines against damages. Improved emergency stop switches The emergency stop switches of EAO were developed within a product update whereby many features were optimized. Dimensions and installation openings remained unchanged.Increased protection classThe front protection class was extended from IP65 to IP65/67. For ribbon cable designs the rear protection class was also increased from IP20 to IP40.Longer mechanical lifeThe mechanical life indicates how often a switch can be operated without electrical load. This feature of EAO’s emergency stop switches was increased fivefold. Initially the switches of series 84 were designed for 50.000 cycles of operation. The optimized switches are designed for up to 250.000 cycles of operation.LightningSMD LEDs (5 – 30 VDC) are used in the redesigned emergency stop switches of series 84. Due to the higher light intensity of the new and improved LED illumination the switches are more visible for the operator – even from the side.Bi-Color LED illuminationRecently, the emergency stop switches are available with red/green Bi-Color LED illumination. They are particularly suitable for applications where the operator needs an additional visual response. Thus, for example, the accurate position of an operational disruption can be indicated in the production process.Further improvements Adaption of the pressure hood Improvement of the mechanical stability If you have any further questions about emergency stop switches of series 84 from EAO our contact persons from the internal sales will be pleased to be at your disposal and to prepare a personal offer for you.Contact to the service teamDownload: Data sheet of emergency stop switches – EAO series 84Online product request

Binder ELC series 570 prevents mismating

Tue, 23 Jul 19 00:00:00 +0200

ELC series 570 of the manufacturer Binder was specifically designed for applications in various medical systems and can also be used in critical areas. The particular of this connector series is, that mismating isn’t possible anymore.Special product features of ELC With ELC series 570 Binder launches an intuitive, easy to operate locking system for connectors. Due to the shape of mating area the mating position of the snap-in locking system with snap hooks is clearly set, what prevents from mismating.The mechanical resistance of this series is designed for over 5.000 mating cycles. So that the resistant connectors of ELC series fulfill the operating requirements of most medical applications.In addition ELC provides a degree of protection according to protection class IP54 in closed state. Due to the innovative design of the associated femal panel mount connector the protection of intrusion of liquids, water splash and of inadvertently touching the contacts is guaranteed.Your key benefits • No mismating possible thanks to the intuitive locking system • Long mechanical resistance: > 5.000 mating cycles • Female panel mount connector provides protection of intrusion liquids, water splash and of touching the contactsTechnical features • Contacts: 12 • Wire gauge: 0,25 m² • Limit temperature: -25°C bis +85°C • Rated current: 2 A • Rated voltage: 150 V • Pollution degree: 2 • Protection class: IP54 • Contact plating: Gold (Au) • Mechanical operation: > 5.000 Steckzyklen • Material of housing: PA66 (polyamide)Article numbers of ELC Male cable connector: Cable outlet 4 – 6 mm: 99 1721 002 12 Cable outlet 6 – 8 mm: 99 1721 000 12Female panel mount connector, solder: 09 1724 000 12If you have any further questions about ELC our contact persons from the internal sales will be pleased to be at your disposal and to prepare a personal offer for you.Further information about ELC from BinderContact to service teamOnline request for products

Potter & Brumfield solid state relays

Wed, 10 Jul 19 00:00:00 +0200

Potter & Brumfield solid state relays of the world’s leading relay manufacturer TE Connectivity are silent, fast and highly durable.Potter & BrumfieldThe solid state relays of Potter & Brumfield’s series SSR, SSRD and SSRT are especially suitable for industrial applications, in which many switching operations are required. At the same time they convince by fast and quiet switiching.Since the Potter & Brumfield solid state relays don’t contain any moving parts, they offer a longer electrical endurance. The relays have very quick closing and opening times among a practically unlimited number of operating cycles.Solid state relays are especially featured in industrial applications such as, for example heating systems, energy supply, lighting and conveyor technology.Your key benefits Blick• Long electrical life • Silent and fast operation/switching • Shock and vibration resistance • Low power consumption and low electrical noiseTechnical prodct features• 240V AC and 480 V AC outputs • Versions up to maximum 10, 25, 40, 50 and 125 A rms • Configurations with 1 make contact (SSR / SSRT) and 2 make contacts (SSRD) • Versions, which turns on by zero or random voltage • Housing: standard „hockey puck“ • Mounting type: Chassis Mount • Operating signal lamp – LED as optical coupling (SSR / SSRT) • UL approval E29244If you have any further questions about the product range Potter & Brumfield from TE Connectivity, our contact persons from the internal sales will be pleased to be at your disposal and to prepare a personal offer for you.Contact to our service teamOnline product request

Earth Bond Systems from Glenair

Wed, 26 Jun 19 00:00:00 +0200

The reliable Earth Bond System of the manufacturer Glenair is suitable for the derivation of electrical current to earth.Easy fitting due to hydraulic assist toolingThe hydraulic setting tool with trigger-release retract mechanism is operable easy and one-handed. That means that the bolts can be fitted on constructions out of steel or aluminium from 1,5 mm wall thickness. Thanks to the innovative assembly technology of this hydraulic assist tooling, additional work steps, like welding, compression, cleaning or other surface treatments, are no longer necessary.Earth connections – phenomenal reliability, functionality and durabilityThe ground bolts of Glenair’s Earth Bond Systems can be installed during every production phase of a machine, a conveyor system, a device or a vehicle, because nothing has to be welded. A conductive connection is always guaranteed because the internal drill hole surface is connecting and not the plate surface. During the installation extreme horizontal forces (lateral forces) are being generated, which are producing a practical inextricably earth connection. The tensile strength of the earth connections (depending on the diameter of the bolt) was tested with a traction of 2.000 to 8.000 Newton (correspond to 200 to 800 kg).Fields of applicationAs the Glenair earth connections require only a one-handed adaption, many places are suitable for setting the bolt. Even in blind holes the earthing expansion bolt can be installed. The two-layer bolts made of stainless steel (with conductive copper core) are corrosion-resistant and were subjected to a 500 hour salt spray test. In various measurements around the connection point, an electrical connection resistance from 20 to 120 micro Ohm (µΩ) was measured. The systems are used, for example, in the automotive industry, in rail and military vehicles as well as in heavy-duty traffic.Your key benefits Consistent quality even on rough or bent surfaces Supports both thru-hole and blind hole installation Cost savings thanks to fast and easy setting of the earthing expansion bolt Only one person necessary for the installation and only one hand for setting the bolt Universal application: can be installed to any suitable chassis location Approved to VGV96953-11 For further questions about the Earth Bond System of the manufacturer Glenair will be pleased tob e at your disposal and to prepare a personal offer for you.Contact to our service teamOnline request for products

Binder M12-A connectors for Food & Beverage

Wed, 19 Jun 19 00:00:00 +0200

The manufacturer Binder offers A-coded M12 connectors of the series 763 and 765 for the industrial sector of Food & Beverage. The connectors are Ecolab verified and have the protection class IP69K. With this attributes these connectors are resistant to liquids. The stainless steel locking system ensures 100 % resistance against corrosion. Due to this attributes this products are the best solution for the requirements of the food industry.Areas of application The M12-A connectors Food & Beverage are especially developed for applications in the field of food und pharmaceuticals. They are also used in the chemical industry.Technical Attributes Number of poles: 3, 4, 5, 8, 12 Coding: A Thread: M12 x 1 Contact surface: Au (gold) Rated current: 4 A, 2 A, 1,5 A Rated voltage: 250 V, 60 V, 30 V Connection: overmolded Cable: TPVHF Your advantages at a glance Certified to Ecolab FDA 21 CFR conform Stainless steel locking system (V4A) Protection class: IP69K M12 in all numbers of poles More information about A-coded M12 connectors – Food & BeverageContact to your service teamOnline request for products

Entrelec terminal blocks – strong and versatile

Wed, 12 Jun 19 00:00:00 +0200

The former ABB brand Entrelec was acquired by TE Connectivity in 2018. For the world’s leading manufacturer of connection technology it is now possible to offer complete transmission systems of signals, energy and data for harsh environments.Börsig is authorized Entrelec distributorEntrelec is well established on the market for many years and particularly adapted for transmissions of energy, signals and data in harsh environments. The terminal blocks are verstalie combinable due to the wide variety of connection methods. They’re used in over 8.000 products and solutions.The Electronic Distributor Börsig is authorized distributor of Entrelec terminal blocks from TE Connectivity in the regions DACH – CZ – HU – PL – SK. As authorized distributor Börsig can offer a lot of Entrelec products directly ex stock.SNK- and SNA series from EntrelecThe two most well-known and largest series are SNA and SNK series:The terminal blocks of SNA series are available with bolt as well as with screw connection technology and are approved for standard and power applications up to 300 mm².SNK series is the new and innovative series of the Entrelec product range. One of this series special features is that the end cover and disconnect plates are suitable to various types and sizes of terminal blocks. Due to the variety of combination possibilities there is a matching solution for nearly every application.Your key benefits Suitable for various connection requirements Improved overview in the control cabinet, which enables a quick troubleshooting Due to the robust design the Entrelec terminal blocks are suitable for critical applications CE-, CB- (IEC und IECEE), IEC Ex-, ATEX-, BV Navy-, RoHS-, UL- and CSA-Certification If you have any further questions about the Entrelec product range, our contact persons from the internal sales will be pleased to be at your disposal and to prepare a personal offer for you.To the overview of Entrelec product rangeContact to our service teamOnline request for products

Signal and power cables of the RADOX® 125 family

Mon, 15 Apr 19 00:00:00 +0200

The highly flexible cable of the Radox® 125 family from HUBER+SUHNER is mainly used for industrial applications.As with the previous series, the reliable connection is maintained even under extreme environmental conditions. The second generation Radox 125 is suitable for use as a building product and meets the highest safety standards. In addition, the cable offers a high thermal and mechanical load capacity and is particularly resistant to chemicals. In addition, the service life is considerably longer than that of ordinary cables. Radox 125 is known for its very good resistance to high and low temperatures. Its resistance to oil, water and ozone, its high abrasion resistance and its high resistance to thermal pressure make it particularly resistant. Weather resistance and absence of halogen are further features of the cable.The second generation of the RADOX® 125 family All characteristics of the previous generation have also been retained in the 2nd generation. The difference is the CPR approval, as the improved plastic compound of the cable complies with the regulations of the latest EU Construction Products Regulation.Fields of Application The cable has many versatile uses, therefore there are many application examples. It is particularly suitable for the connection of motors, magnets, transformers and coils, as well as for the internal wiring of heaters, electrical devices, distribution boards in automation, control panels and sensors, and for the protected and fixed installation in pipes, directly in plaster or below, in cable ducts and also for surface cabling.Overview of Advantages: Temperature range: −40 to +125 °C Temperature range (fixed installation): −55 to +145 °C RADOX® does not melt and drip in the event of a short circuit or at high temperatures Highly flexible, halogen-free, resistant and fire-retardant RADOX® Cable sheathing (electron beam cross-linked insulation) Easy to strip and process CPR-Approval (EU Construction Products Regulation) Class ECA up to 6 mm² Class BCA for all other cross-sections If you have any further questions, our contact persons for the products of the manufacturer HUBER+SUHNER will be pleased to be at your disposal and to prepare a personal offer for you.Contact to your service teamDatasheet as PDF-DownloadOnline request for products

DEUTSCH DT Detector plug-in connector

Fri, 05 Apr 19 00:00:00 +0200

The DEUTSCH DT series from TE Connectivity was designed especially for cable-to-cable applications in motors or gearboxes. The robust plug-in connectors are sealed against ambient influences and are ideally suited for use in adverse conditions in which even small problems with the connections can be critical.Fast diagnosis thanks to LED displayThe Detector connector with LED display from the DT family confirms the power supply for the connection visually by lighting up visibly. This makes diagnosis and troubleshooting easier - especially in areas with poor visibility and accessibility of the connections.The 2-way plug has a transparent housing and a wedge socket with built-in 12 V or 24 V LED. Thanks to its robust construction, the plug is sealed against ambient influences and has been designed for requirements in the construction, agricultural, truck, shipbuilding and mining sectors.Product features: Number of contacts: 2 Type of protection: IP67, IP6K9K when used with a terminal housing Temperature range: -55 °C to +125 °C Suitable for use with all DEUTSCH contacts of size 16 (13 Amperes) LED display visible from several angles thanks to the transparent housing Colour-coded wedge socket for operating voltages of 12 V (yellow) and 24 V (red) TE part number:Socket housing:DT06-2S-SDT-CE27 (2286003-1) housing, LED, with end cap DT06-2S-SDT-CE28 (2286003-3) housing, LED, without end capWedge socket:W2S-SDT-12V (2286014-2) wedge socket, LED, 12V, yellow W2S-SDT-24V (2286014-1) wedge socket, LED, 24V, redOur contacts for TE Connectivity products will be happy to answer any further questions you may have and prepare a personal quotation for you.Brochure on the DEUTSCH DT Detector (English) Further information on the DEUTSCH series from TE Connectivity Contact to your service teamOnline product inquiry

Provertha is taking over the D-Sub production of ERNI.

Wed, 13 Mar 19 00:00:00 +0100

The manufacturer Provertha is taking over as of right now the production of all existing D-Sub products from supplier ERNI.Takeover by ProverthaAs a result of the takeover, the former product portfolio of Provertha is being supplemented in an ideal way, since the D-Sub line has been expanded with various products. The products are available in various configurations and with between 9 and 50 contacts.This will ensure that the products are available both for current and for future customers. Since we are a Provertha distributor, the former ERNI products can be requested from us using the original ERNI part numbers.Consistent qualityAs part of the takeover we also took over the existing machines and tools to make it possible for us to continue to ensure uniform and consistent quality.The PROVERTHA distributor Börsig offers in its capacity as an authorised sales partner die PROVERTHA products together with competent consulting and short delivery times.Our contacts for Provertha products will be happy to answer any further questions you may have and prepare a personal quotation for you.To the Börsig contactsMore information about Börsig

Official distribution rights: ENTRELEC terminal blocks from TE Connectivity

Wed, 27 Feb 19 00:00:00 +0100

After the takeover of the terminal block business of the ABB brand Entrelec by TE Connectivity the Electronic-Distributor Börsig from Neckarsulm holds the official distribution rights for the DACH - CZ - PL - HU - SK regions.The following connectivity technologies belong to the scope of the Entrelec terminal blocks: SNK series SNA series Solution series The SNK seriesPermits rapid installation through the direct connection function, PI spring, screw or plug-in connection. In addition, the inventory of accessories can be reduced by 50% by using standard accessories throughout instead of various connection methods.The SNA seriesProven in the market for over 60 years, the SNA series allows a large selection of functions such as, for example, knife disconnect terminals, installation terminals, mini-terminals and much more.The Solution seriesA wide variety of solutions for special applications, from which you can benefit. These include, for example, the ADO system (IDC) and spring balancer connectors and quick-connectors.The terminal blocks allow use in demanding environments and thus always ensure a robust and secure connection. They allow connection from 0.22 to 300 mm². As a result, Börsig can offer an even broader and more comprehensive product portfolio and this also makes possible orders for other than the standard packing units and without a minimum order charge.Multiple certificationThe products from Entrelec offer a wide variety of connection options and have been certified worldwide for the most varied areas of application. Among others, these include CB-, UL-, IEC-, ATEX- and CSA certification Börsig has a high storage capacity for Entrelec products and for additional articles from TE Connectivity so that it is possible to guarantee a high level of availability and short delivery times.We have put together a summary of the various terminal blocks to provide a service to our customers.Download: Broschure - Entrelec Terminal BlocksContact to Börsig More information about the company Börsig

Shrink tubing from Raychem in stock at Börsig

Fri, 08 Feb 19 00:00:00 +0100

Shrink tubes are among the main components of the Raychem product series from TE Connectivity. They are suitable for extreme environmental and weather conditions and can thus be used for a wide range of different applications such as in mechanical engineering, rail transport, energy technology or power supply. The RoHS-compliant products of the series ATUM, CGPT and RNF-100 are available ex stock from Börsig.ATUM - shrink tubes with a high stretch rate The shrink tubes of the ATUM series have a high shrink ratio of 3:1 or 4:1. This means most damage to the cable sheath can be repaired without removing the plug-type connectors. The polyolefin tubes are lined with a self-adhesive glue which sticks to numerous plastics, rubbers and metals - including polyethylene, aluminium, steel and copper.Data sheet for the ATUM seriesStandard shrink tubes of the CGPT seriesThe flame-resistant polyolefin heat shrink tubes of the CGPT series are suitable for universal use and available in the shrink ratios 2:1 and 3:1. This series is suitable for a whole range of applications thanks to the unique combination of chemical, electrical and physical properties.Data sheet for the CGPT series RNF-100 - shrink tubes for military purposesThe RNF-100 series is universal, flame-resistant and high-performance heat shrink tubing made of polyolefin. The special properties of this product series include resistance to liquids and an outstanding performance at higher temperatures. Thanks to the physical, chemical and electrical properties of this universal tubing, it is used mainly in the industry and military sectors. The shrink ratio of the RNF-100 series is 2:1.Data sheet for the RNF-100 series Our contacts for TE Connectivity products will be happy to answer any further questions you may have and prepare a personal quotation for you.To the Börsig contactsOnline product inquiry

Binder – VDE certification for the extruded-insulated variants of series 720

Mon, 28 Jan 19 00:00:00 +0100

The extruded-insulated miniature series 720 connectors from Binder have been tested and certified by the Verband der Elektrotechnik, Elektronik und Informationstechnik e.V. (VDE). The certification further underlines the quality of the Binder connectors.VDE certificate for the extruded-insulated variants of series 720The VDE mark is a sign of conformity of an electro-technical product with national and international standards and directives and confirms that it meets legal protection requirements. The test quality of the VDE mark is recognised all over the world.The extruded-insulated 3- and 5-pole variants of series 720 from Binder have been certified by the VDE. Certificates were awarded to both connectors and cables. These variants are mainly used in the lighting technology sector, where certification serves as an additional quality indicator. The VDE mark is proof of the safety of these products against electrical, mechanical, thermal and other hazards.The certification is valid for the following article numbers: 79 9149 120 03 - 3-pole male cable connector 79 9150 120 03 - 3-pole female cable connector 79 9157 120 05 - 5-pole male cable connector 79 9158 120 05 - 5-pole female cable connectorNote: The VDE mark is attached to the packaging of these items and not on the products themselves.Our contacts for Binder products will be happy to answer any further questions you may have and prepare a personal quotation for you.Mark approval for series 720 from Binder To the Borsig contact Online Product Request

Spuma RS FR from HUBER+SUHNER

Thu, 29 Nov 18 00:00:00 +0100

Spuma RS FR is the latest and most flexible version of the Spuma family from HUBER+SUHNER.New: Rotary Swaging (RS) technologyLess loss or more flexibility? Fixed or flexible wire? Thanks to HUBER+SUHNER's patented Rotary Swaging (RS) technology, these decisions no longer need to be made. The low-loss cables of the Spuma RS family impress with both flexibility and low attenuation. Learn more about Rotary Swaging technology and Spuma RS in this video.Thanks to the new TPU jacket material, the Spuma RS cable also offers the highest possible flame protection.Your advantages at a glance:- Flexibility- Low attenuation- Excellent standing wave ratio (VSWR)- Outstanding shielding- Highest possible flame protection thanks to TPU jacket- Halogen-free- 6 GHzIf you have any further questions, our contact persons for HUBER+SUHNER products will be happy to assist you and provide you with a personalized quote.Data sheet for the Spuma family from HUBER+SUHNERTo the Börsig contactsonline product inquiry

Han-Eco® from HARTING – Plastic connectors

Wed, 07 Nov 18 00:00:00 +0100

The Han-Eco® enclosure series is made of high-performance plastic, which makes it highly resistant to environmental influences and suitable for indoor and outdoor applications.This type of manufacturing also gives the series advantages in terms of weight and cost. Furthermore, the enclosure is available in four sizes.Your advantages at a glance: - Low weight- Very high robustness- Can be used both indoors and outdoors- Corrosion-resistant- Fire-resistant according to UL94 V0- Plug compatibility between metal and plasticIf you have any further questions, our contact persons for Binder products will be happy to assist you and provide you with a personalized quote.To the product video for HARTING Han-Eco®To the Börsig contact personsTo the online product inquiry

Bulgin Series 4000 miniature circular connectors

Mon, 29 Oct 18 00:00:00 +0100

The Buccaneer series from connector and component manufacturer Bulgin is renowned for providing reliable, environmentally sealed connections for power, signals, and data in demanding environments. The 4000 series is the most compact of the Buccaneer series.Versatile miniature connector for harsh environmentsThe Buccaneer 4000 series was developed to offer the features of the 6000 and 7000 series for applications with limited space. Thanks to their thermoplastic construction, these robust yet flexible miniature connectors are suitable for a wide range of power supply and data applications where fast, dust- and water-tight connections are required. The connectors also offer a long service life of up to 1,000 mating cycles.Quick and easy installationThanks to the fast-turning bayonet coupling mechanism, the miniature connectors in the Bulgin Buccaneer Series 4000 can be connected quickly and easily and replaced as needed – without the need for special tools. The series is available for various types of installation, such as rear panel, inline, stranded wire, or PCB mounting. The ability to completely replace plastic and metal circular connectors makes this connector series unique.Areas of applicationThe Bulgin Buccaneer Series 4000 is versatile thanks to its compact design. The connectors are suitable for power supply and data applications across a wide range of markets. The fast, dustproof, and waterproof connections are used in the following areas, for example:MarineIndustryRenewable energiesData and telecommunications applicationsRetailTransport and infrastructureTechnical characteristicsProtection class: IP66, IP68, IP69K (when plugged in)Number of poles: 3, 8, and 12Rated power up to 600V and 13AConnector size: MiniatureRear panel, inline, PCB, or stranded wire mountingCable diameter: from 3 to 7 mmIf you have any further questions, our contact persons for Bulgin products will be happy to assist you and provide you with a personalized quote.Data sheet for the Bulgin Buccaneer Series 4000Video about the Bulgin Buccaneer Series 4000To the Börsig contactsOnline product inquiry

696 HEC Series – Hinged Cover

Thu, 04 Oct 18 00:00:00 +0200

One of the leading manufacturers of circular connectors worldwide and longterm partner of the Electronic Distributor Börsig is Binder. The manufacturer extends his 696 HEC Series to meet user needs. Binder’s Harsh Environment Connector (HEC) is now available with hinged cover.Maximum Protection – either in unmated condition (h2)Products of 696 HEC Series are mainly used exterior in harsh environments. This is why specifications like UV resistance, degree of protection IP68 and IP69K, the opportunity of bayonet locking as well as resistance to shock and vibration are especially important.Up to now protection could only be guaranteed in mated condition, but equally important is the protection in unmated condition. Therefore many users applied a protective cover which wasn’t fixed at the flange part. The problem with this method was that the protective cover has often been forgotten or got lost. Additionally the cover was easy to get dirty and the mounting exhausting.For facilitate the use Binder extends its HEC flange socket by a version with hinged cover. The hinged cover is directly mounted to the flange socket and it’s impossible to lose it anymore. Furthermore the protection classes IP68 and IP69K are either guaranteed in unmated condition. The cover is spring-loaded what protects the flange socket without conscious closing against water, dust and other environmental influences and ensures the hinged cover to be in the right position while opening automatically. Simultaneously the new version doesn’t need more space. The installation space correspond to the original “standard design”.Key Benefits of the HEC flange socket with hinged cover (h2)Maximum protection against environmental influences in mated as well as in unmated conditionEasy and quick mounting thanks to bayonet lockingSame installation space as the original „standard design“Technical Specifications (h2)Series: 696Contacts: 4+PE, 8 (4 + 3+PE), 12Rated current: 32 A – 3 ARated voltage: 600 V – 60 VDegree of protection: IP68, IP69KTermination: crimpOur experts in Binder products will be only too pleased to answer your further questions an to provide you with a customised offerData sheet of Binder's 696 HEC Series flange socket with hinged coverIf you have any further questions, our contact persons for Binder products will be happy to assist you and provide you with a personalized quote.Contact the Binder experts at BörsigOnline product request

Rewireable Cord Connectors of MPE Garry

Thu, 13 Sep 18 00:00:00 +0200

Our partner, MPE Garry, is developer and manufacturer of connector systems. Its portfolio has been extended with two new cord connectors – a cable connector (series 729) and the matching cable socket as well as a fitting cable socket (series 730).The connectors are designed for cold conditions (IEC 60320). For example these are used for high-performance end devices, which do not generate significant heat like computers. The new rewireable rubber connectors have 3 poles. Two of the three pins are responsible for the power transmission. The third pin is the earthing of the plug, which ensures safety for the user and protects from a electric shock.Key benefits of the device plugs of MPE Garry (h2)Easy Assembly (h3)MPE Garrys rewireable cord connectors are quick and easy to install. The assembly of the new, rewireable device plugs of MPE Garry is easy and quick. Opening and closing of the connectors through a single screw.2. Secure hold (h3)The integrated strain relief as well as the protective sleeve help to protect the cable and ensure a secure hold. This stabilizes the cable and prevents it from breaking. Nevertheless, the cable remains flexible in order to participate in any expansion and compression movements.3. Compatible with standard cables (h3)The connectors are compatible with commercially available, flexible cables. Thus, the connectors can be used in a variety of ways. Technical Specifications: (h2)Polbild: T-standard sheet C19 (socket) and C20 (connector)Rated current: 16ACable connection: screwedUse with all commercially available, flexible cables H05VVF, H05RR-F or H05RN-F with the wire thicknesses 3G1,0mm² oder 3G1,5mm²UL certificationsENEC symbolData Sheet of the rewireable cable connector of MPE Garry - Series 729Data Sheet of the rewireable cable socket of MPE Garry - Series 730Contact to your Electronic DistributorOur experts in MPE Garry products will be only too pleased to answer questions you may have and to provide you with a customised offer. Contact he MPE Garry experts at BörsigOnline product inquiries

TE Connectivity: Connectors of the Dynamic series

Mon, 03 Sep 18 00:00:00 +0200

The Dynamic series from TE Connectivity has been specially developed for use in applications where high contact density and reliable transmission of signals and power are important.Large product familyThe wide product range of the Dynamic series allows use in nearly all areas. The cable-to-PCB, cable-to-panel or cable-to-cable connectors are available in many different housing designs. The components are also available in standard crimp and spring clamp versions. Standardized contacts limit the use of required application tools.Benefits at a glance: vibration and shock resistant wide range of applications audible click long service life with minimal downtime wide product family Pitch (mm)2.02.53.52.53.815.087.5SeriesD-1100D-1200D-1900D-2100D-3100D-3200D-3950TerminationCrimpCrimpSpring ClampCrimpCrimpCrimpSpring ClampCurrent (A/UL)5545151514.5Voltage Rating (V/UL)125250150250250600600Wire-to-BoardXXXXXXXBoard-to-BoardXX-XXX- Examples of typical applications: robotics data communication industrial control elevator/Escalator HMI (Human Machine Interface) etc. Our experts in TE Connectivity products will be only too pleased to answer any other questions you may have and to provide you with a customised offer. Contact to BörsigOnline product request Dynamic series video

Binder: 12-pole M8 cable and panel mount connectors

Mon, 25 Jun 18 00:00:00 +0200

Our longstanding partner Binder has expanded its product portfolio and is now offering M8 cable and panel mount connectors from the 768 and 718 series with 12 poles.M8 cable and panel mount connectors, 12 polesBinder's 12-pole M8 cable and panel mount connectors are available as from March 2018.The 768 and 718 series are available for straight cable connections. The male and female connectors are already moulded onto the cable and therefore no longer have to be assembled. The moulded cable comes in two different standard lengths: 2 m and 5 m. The single wires are already attached to the panel parts. Their standard length is 200 mm.Technical specifications Number of poles: 12 Thread: M8 Termination: PUR cable / single wires Protection category: IP67 Contact plating: Au (gold) Rated current: 1 A Rated voltage: 30 V Our experts in Binder products will be only too pleased to answer any other questions you may have and to provide you with a customised offer.Contact to BörsigData sheet Binder M8 cable and panel mount connectors, 12 polesOnline product queries

PCB terminal blocks for PROFINET by Phoenix Contact

Tue, 22 May 18 00:00:00 +0200

The provider of interface and interconnection products and solutions, Phoenix Contact, is now offering the first PCB terminal blocks for PROFINET-compliant data transmission. The products MKDS 1, SPTAF 1, ZFKDS 1.5C and SPT 2.5 are all compatible PCB terminal blocks, specially designed for connecting twisted pair conductors with cross-sections of 0.14 mm² to 4 mm². Tension clamp, screw and push-in spring connections are available for conductor connections. Products meet the requirements of the PROFINET directive (version 4.00) and safe data transmission as per CAT5 (IEC 11801) is also possible. Field of applicationIn addition to other features, the PCB terminal blocks comply with IEC 60079-7 standards and can therefore be used in explosion-proof areas. Processing industry devices can also be connected. PROFINET PCB terminal blocks have been added to the existing range of field and device connectors such as M12 and RJ45.Benefits at a glance: Suitable for twisted pair conductors with cross sections of 0.14 to 4 mm². Can be connected via spring-cage, screw or push-in spring connections. Meet the requirements of the PROFINET directive (version 4.00). Secure data transmission as per CAT5 (IEC 11801). Extend the range of existing field and device connectors, such as M12 and RJ45. Our experts in Phoenix Contact products will be only too pleased to answer any other questions you may have and to provide you with a customised offer. Contact to BörsigOnline product queries

Binder NCC female panel mount connectors fastened from back side

Mon, 07 May 18 00:00:00 +0200

The female panel mount connectors made by our manufacturer, Binder, form part of the 770 Series NCC - Not Connected Closed. Since March 2018 they've also been available with a rear assembly system.NCC - Not Connected ClosedThis female connector's particular feature is already indicated by its name, NCC - Not Connected Closed. The interfaces in this series remain closed even when unmated, without the need for any additional components such as protection caps, socketing or hinged lids. The connector's contacts are also covered by a spring-enforced door mounted inside. This protects the contacts by stopping any water, dirt or foreign bodies entering the device.Easy assembly thanks to the bayonet lockThe bayonet lock not only makes installation much easier but also prevents the contacts from being touched and thereby protects against manipulation. This locking system means the product can be used in areas where watertight connections are required and reduces costs by eliminating the need for additional components or extra assembly work.New: rear assemblySince March 2018, Binder has also offered its bayonet NCC female panel mount connectors with rear assembly, extending its scope of application to various fields and industries. This series is particularly suitable for areas where watertight connections are required, as the contacts are protected even when unmated. They are therefore often used in medical and measurement technology.Benefits at a glance: Easy assembly thanks to the bayonet locking system Rear assembly Protected against water, dirt and foreign bodies even when unmated Contacts are touch-proof; no manipulation is possible Technical specifications: Number of poles: 8 Mating type: bayonet Termination method: solder / dip-solder Protection category: IP67 (also when unmated) Contact plating: Au (gold) Temperature range: -25°C ... +85°C Rated voltage: 175 V Rated current: 2 A Our experts in Binder products will be only too pleased to answer any other questions you may have and to provide you with a customised offer.Contact to Börsig Data sheet Binder 770 Series NCC female panel mount connector Online-Request for Products

Test winner: Weller's WE1010 soldering station

Tue, 13 Mar 18 00:00:00 +0100

Our longstanding partner Weller is one of the best known manufacturers of soldering stations. Weller's new WE1010 soldering station has won the Heimwerker Praxis comparative test of electronic soldering stations (issue 1/18). 6 different soldering stations were tested and compared, rating categories such as temperature, operation and equipment. For example, the temperature accuracy, performance of the soldering iron with both new and old tin and the stability of the rod stand were all assessed. Equipment and cost effectiveness were also included in the overall test rating. WE1010 – Powerful, reliable, user-friendly, cost effectiveThe WE1010 soldering station was especially developed by Weller for the training sector, professional users and also cable assembly. The station's compact design and user-friendly menu were particularly impressive. Another advantage is the soldering station's good temperature performance. Reliably high quality and repeatable soldering results can be achieved thanks to the ability to lock in temperature settings. The WEP 70 soldering iron has a short round tip which heats up quickly and can be replaced without tools while still hot. Thanks to the handle's ergonomic design, the soldering iron fits securely in the hand and also in the safety stand. Benefits at a glance: 70W soldering iron with ergonomic design Toolless tip change ESD* safe soldering station, iron and heat-resistant silicone cable Standby mode and auto setback protect the equipment and the environment Password-protected to preserve settings *ESD= electrostatic dischargeTechnical specifications: Voltage: 230 V Power output: 85 W Temperature range: 100°C + 450°C (depends on tool) Temperature accuracy: ± 9 C° Temperature stability: ± 6C° Display: Digital LC Display Fixed settings: yes Pack contains: WE1 Soldering Station 230V WEP 70 Soldering Iron PH 70 Safety Rest for WEP 70 ETA Soldering Tip Weller WE 1010 Soldering Station Data Sheet Contact to Börsig Online-Request for Products

Foundation of Börsig s.r.o. in Czech Republic

Thu, 15 Feb 18 00:00:00 +0100

Electronic distributor from Neckarsulm (Germany) founded a subsidiary in Czech Republic. Börsig s.r.o. got its head office in Brno and enables an integral customer service in Eastern Europe.After the foundation of Börsig Austria GmbH in 2014 the electronic distributor founded his second subsidiary in Czech Republic to expand towards Eastern Europe. "Meanwhile many of our German customers own production and administration locations in Eastern European countries", explains Thomas Engler, Export Sales Manager of Börsig GmbH, and adds "we decided to expand towards Eastern Europe to still offer our integral service to these customers."Head office BrnoThe electronic distributor has choosen Brno as site in Czech Republic because of its neighbourhood to Slovakia. "The location guarantees the intensive and individual support of our customers directly on site as well as the comprehensive distribution in both countries", says Uwe Glowalla, Head of Sales at Börsig Gmbh. At first one employee should be incorporated to the processes and products of the electronic distributor. In the step the sales activities should be developed. With increasing orders either the number of sales employees should be raised up in Brno.AMPER fair participation (CZ)Börsig s.r.o. exhibits at AMPER from 20th to 23rd of March 2018 for the first time. Its an international trade fair for electrical engineering and electronics assembly.Franchised distributor for Intercontec-products in Czech RepublicBörsig is franchised distributor of Intercontec-products from TE Connectivity in Czech Republic. Unique for the products is there Plug&Play concept. Therefore the Signal-, Hybrid- und Leistungssteckverbinder are applicable variously and enable a quick and easy assemply without tools as well as the exchange of damaged items without problems. Due to that installation times could be shortened and risks of problems during the installation could be reduced.The authorization of TE Connectivity is a sign of appreciation and underlines the trust of the world's largest manufacturer of connectors. As franchised partner Börsig offers the best technical service to his customers and enables a high reliable delivery as well as a purchase beyond packaging units.Download Press Release (0,4 MB / PDF)Contact to Börsig s.r.o.

New: Binder M12 Two-piece panel mount connector

Tue, 30 Jan 18 00:00:00 +0100

Our manufacturer and longstanding partner Binder developed a two-piece panel mount connector for the M12 interface of the series 763.More flexibility due to separate componentsThe new developed M12 panel mount connector with square housing offers a more flexible assembly because the insulation insert and the housing can disassembled. This enables the flexible exchange of the insulation insert.The insulation insert is available at the Electronic Distributor Börsig with the standard number of positions of 4, 5 and 8 and a wire length of 200 mm. The gained variety through exchangeable inserts offers more flexibility and more cost-efficiency during it's assembly process.A further big advantage is the variable positioning of the coding which enables a cable outlet in increments of 45 degrees.For now the new two-piece M12 panel mount connector is available for sensor applications (M12-A). In the future the connector will also be offered with other types of coding.Technical specifications: Number of positions: 4, 5 and 8 Rated current: 4 A (3 A UL), 1,5 A (2 A UL) Rated Voltage: 250 V, 60 V, 30 V Contact finish: Gold (Au) Termination: preassembled wires AWG 24/7 Standard wire length: 200 mm• Protection rating: IP68 in mated condition Your Key Benefits: Connector Components - housing and insulation insert - can be mounted separately Easy exchangeability of the insulation insert Variable coding-positioning enables a cable outlet in increments of 45 degrees Data sheet: Binder Two-piece M12 panel mount connector of the series 763 (0,3 MB / PDF)Contact to sales teamOnline-Request for Products

HARTING Han® M Bulkhead Mounted Housings for extreme conditions

Tue, 16 Jan 18 00:00:00 +0100

Our manufacturer HARTING has revised and optimized his bulkhead mounted housing of the Han® M portfolio. In mated and locked condition the previous housings had the protection class IP65. The new ones are more resistant and offer a higher security for external influences.Han® M Housing for high environmental demandsThe new bulkhead mounted housings of HARTING's Han® M series are protecting the inner workings of connectors against powerful jets of water (protection class IP66) as well as against immersion up to a depth of one meter (protection class IP67) according to IEC 60539.The housing is accessed from the outside because of its circumferential collar which also prevents the seal from slipping inwards and outwards. Additional the seal of the new housing is more solid as the one of its predecessor and compensates unevennesses. A special flange prevents the immersion of water into the inner working and protects the connector's points of contact.The new housing of the manufacturer HARTING offers a higher protection against external influences like the immersion of water and ensures safety either under extreme conditions and weather influences.Key benefits of HARTING's new Han® M Bulkhead Mounted Housing: High corrosion protection Optimal for the exterior area Suitable for extreme conditions and weather influences Waterproof, immersion up to the depth of one meter temporarily possible (depends on protection class) Space-saving: Around one third smaller than housings of the protection class IP68 Technical specifications: Compatible with all Han® M hoods Material: aluminium die-cast Protection class: IP66 and IP67 Available in construction size 6 B, 10 B, 16 B and 24 B Operating temperatures ranging from -40°C up to +125°C Locking element out of high quality stainless steel (do not rust) Examples of typical applications: Wind turbines Cranes Switchboards Transportation technology (e.g. train) Construction machines Machinery and plant engineering Datasheet HARTING Han® M Bulkhead Mounted Housing (PDF / 0,4 MB)Contact to Börsig sales teamOnline-Request for Products

Current: Glenair grounding system

Thu, 04 Jan 18 00:00:00 +0100

The use of the setting tool is a reliable way to attach the grounding to metal. This connection system eliminates the need for work steps such as welding or pressing.The area of application is ideal for environments that only allow one-sided processing. Examples of applications can be found in the automotive industry, rail and military vehicles, and heavy-duty transport. Easy to useFirst, a hole must be drilled to the desired diameter, then the corresponding bond is inserted on one side using the setting tool. An audible click signals that the fastening process is complete. The tool can then be removed and the grounding connection installed.The Earth Bonding System is available for aluminum and steel structures with a thickness of 1.5 mm or more.Advantages at a glance:• Consistent quality• Can be used on uneven and curved surfaces• Replaceable in case of damage• Only one person is required for installation• Low weight of the setting tool• Stable connection with low electrical resistanceOur contact persons for Glenair products will be happy to answer all your questions and provide you with a personalized quote:To the Börsig contact personsOnline product inquiry

Adaptation of the HUBER+SUHNER spool concept

Mon, 20 Nov 17 00:00:00 +0100

Our manufacturer HUBER+SUHNER has optimised its delivery spool concept. All cables supplied by this manufacturer, such as its renowned RADOX® cables, are now delivered on new spools. Deliveries with these new spools started in October 2017 but, at first, deliveries using old and new spools may overlap.The new delivery spoolsDuring the development of this new spool concept, particular attention was paid to improving handling and optimising transport and storage volumes. Development also focused on sustainability and protecting the environment.The spools' materials and dimensions were also adapted. The previous spools, which were partly made of wood, have now been replaced with 100% recyclable spools made from polypropylene/polystyrene. The size of the spools has also been optimised to ensure they're suitable for Euro pallets.Key benefits of the new spools Optimised volumes Improved handling Hardwearing Environmentally friendly Learn more about the new spool conceptFor a better overview, we've produced an extra page with further information on the new HUBER+SUHNER spool concept. Here you can learn more about the new dimensions of the delivery spools and the concept's advantages, as well as comparing the old and new spools.Our specialists in HUBER+SUHNER products will be pleased to answer all your questions.More information about the new spool concept from HUBER+SUHNERContact to Börsig

DEUTSCH Series: Official distribution franchise for Börsig

Thu, 19 Oct 17 00:00:00 +0200

The Electronic-Distributor Börsig from Neckarsulm (Germany) receives the official distribution franchise for the DEUTSCH series of the manufacturer TE Connectivity.What DEUTSCH stands out forThe DEUTSCH connector series stand out with their rugged construction. Therefore they are suitable for applications in demanding environments. For example they're resistant to vibrations, extreme temperature conditions, chemicals and fluids. The reliability of DEUTSCH has been approved for more than 70 years now.DEUTSCH DT SeriesDT is one of the most popular DEUTSCH series. It was specifically designed for wire-to-wire connections. Although flange and board mounted options are available as well. Due to their thermoplastic housing and sealings made from silicone they are ideally equipped for harsh sourroundings.Download: Flyer DEUTSCH DT SeriesYour key benefits at BörsigBörsig holds a high level of stock for the DEUTSCH products as well as for other TE series. As usual Börsig is aiming for standard availability and leadtimes short as possible if at all necessary. In addition, the products can be ordered outside of packing units as well as without charge for small quantities at Börsig.To make the different series as accessible as possible we compiled an overview of all the DEUTSCH series.Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation. Overview of the DEUTSCH SeriesContact to BörsigMore information about Börsig

HARTING hinged frame plus with many advantages

Thu, 12 Oct 17 00:00:00 +0200

The well-known Han-Modular® system made by our manufacturer HARTING has been extended with the addition of the new "hinged frame plus".The Design of the hinged frames was essentially retained to ensure full compatibility with all Han-Modular® connectors as well as a high mechanical stability.What is new about the "hinged frame plus"?The new "hinged flame plus" has got an additional stainless steel spring which keeps the frame engaged, wheter it is in closed or open position. This eases the assembly of frame and connector modules.Also new is the funnel-shaped the frame window. This enables the automatic centering of all modules when closing the frame.Furthermore there is a contour at the hinged frame which keeps it together so that the fixing element is not needed any longer. At the same time this contour creates a hearable "click" when the frame is being closed.For better orientation while assembling the modules, the frame has been marked in form of a black triangleAll other lettering is now printed with better visibility so all module positions (A to F) can now be identified at first sight.Your Key Benefits: The additional stainless steel spring makes assembly easy Modules are being centered automatically when closing Compatible to all Han-Modular® connectors Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation.Contact to sales teamOnline-Request for products

Börsig is authorized partner of Bulgin

Mon, 02 Oct 17 00:00:00 +0200

Since August 2017 there is a new manufacturer in the product portfolio of the Electronic-Distributor Börsig: Bulgin. Bulgin is a world wide recognized manufacturer of connectors and components with headquater in Great Britain which appointed Börsig as authorized partner. New product portfolio of BörsigBörsig extends his product portfolio of the power- and data-connectors with the protective ratings IP66-, 67-, 68- and 69K. With the extended product portfolio the Electronic-Distributor wants to offer a more balanced and compatible product range especially for applications under extreme environemental terms.About BulginBulgin was founded in 1923 and is focused on the sectors radio, electrics and electronic. The manufacturer Bulgin is a member of Elektron technology, which is specialised of connecting and supervising concepts and products.Overview of Börsig's manufacturer Bulgin Contact to sales teamMore informations about Börsig

Börsig was voted „Distributor of the year 2017“

Wed, 20 Sep 17 00:00:00 +0200

More than 3.400 readers of the journal "Elektronik" from Germany have voted Börsig "Distributor of the year 2017" in the product category electromechanics.Assessment of the distributorsThe survey has been occured in the product categories "active components", "passive components", "electromechanics", "optoelectronics", "displays" and "embedded-systems" (hard- and software).Within the individual product categories the following criteria were assessed by grade principle: overall impression product portfolio technical competence & support delivery service product samples delivery service volume product availability product samples product availability volume Best result for BörsigIn the product categorie "electromechanics" Börsig reached its best result since participation at this readers surveyuntil now. In all seven categories the Electronic-Distributor gained a place unter the Top 10.In the categories "overall impression", "technical competence & support" and "delivery service product samples" the customers voted Börsig in the first place. The second place was reached in the categories "product availability product samples" and "delivery service volume". On its specialty "technical competence & support" Börsig got his best mark (1,37).Download: Result table - Distributor of the year 2017Gerneral Manager, Stefan Börsig, is very happy aboutr the outstanding result and says: "The result oft he readers survey shows, that our customers are very satisfied with our service and that Börsig as a medium-sizes familyowned business plays an important role in comparison tot he global player of the sector. The satisfaction of the customers confirms the technical Know-how and the successfulm cooperation of our employees. Therefore we still want to invest in our service."To the Börsig LinecardMore information about Börsig

The EAO Smart-Box is ideal for remote control units

Fri, 15 Sep 17 00:00:00 +0200

Machines or systems in industrial environments are increasingly dependent on flexible operating units with regard to functionality and / or front design. For this reason, our manufacturer EAO has developed the Smart-Box, which has a simple and customizable "Snap, Plug & Play" solution for decentralized operating units. When assembling, there is a time saving in that the operating elements are mounted on the mounting adapter without a special tool and easy snapping on. In addition, it is possible to place the device directly on a standard top hat rail without the mounting adapter. This results a unique level of flexibility in terms of number and arrangement of the Smart Boxes. EAO series 84 is very well suited for the use of control elements.The technical specifications: Protection class IP67 Operating temperatures ranging from -25 ° C to + 70 ° C Can be used in dirty environments, high humidity or severe vibration Easy snap-on mounting and M12 connection technology Your Key Benefits: Simple, compact and universal Flexible, sturdy and compact design Front design and functionality can be customized Standard assortmentTypical applications: CNC machines Semiconductor and electronics production Food and beverages Industrial lifting and handling automation Production and process control packaging systems production lines Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation.Datasheet EAO Smart-BoxContact to sales teamOnline-Request for Products

NEWS: HUBER+SUHNER: NEX10 RF connector system

Thu, 14 Sep 17 00:00:00 +0200

HUBER+SUHNER, a global supplier of electrical and optical interconnection components and systems, has created an innovative coaxial connector solution for the telecommunications market. The PIM-HF connector system was developed specifically for smaller telecommunications devices. The NEX10 is characterized by very low passive intermodulation (PIM) performance, which is increasingly demanded by users of mobile devices. This feature successfully meets the existing and future requirements of small systems for 4G and upcoming 5G networks. The separation of the electrical contact from the mechanical contact surface results in the low PIM mentioned above and high RL performance regardless of the coupling mechanism or the applied torque. Further technical features at a glance:- Small dimensions, flange height 12.7 mm- Three coupling mechanisms (push-pull, screw, and hand screw)- Optimized for ¼" cable- Operating frequency up to 20 GHzYour advantages at a glance:- A robust design with reliable performance for outdoor use- Reliable performance without installation errors- Compact components- Interface protected against installation damage- Flexibility during installation- Protection against corrosion and extreme weather conditionsDue to its design features, the miniature PIM RF coaxial connector is ideally suited for applications that require PIM stability and robustness in small dimensions.Possible areas of application are: - Remote radio equipment- Distributed antenna systems (DAS)- Small cells and building architecturesYour contact persons for HUBER+SUHNER products will be happy to answer all your questions and provide you with a personalized quote. Video to NEX10Your Börsig contactsOnline product inquiry

Binder M16 panel mount connector with square flange

Thu, 10 Aug 17 00:00:00 +0200

Our manufacturer and longterm partner Binder is extending their portfolio of the well proven M16 connectors by a panel mount version with square flange.The miniature connectors are of great importance in the industrial environement, especially for measurement and control as well as for the medical field. Unique about these M16 connectors, manufactured by Binder are the versatile designs as well as the various options of termination (solder, crimp and preassembled).Possible fields of application: Measurement technology Control technology Medical technology Technical specifications of the M16: Number of positions: 2 to 19 Thread: M16 x 0,75 Rated current: 7 - 3 A Rated voltage: 250 - 60 V Contact surface: silver (Ag) Termination: solder, crimp, preassembled Protective rating: IP67 Your Key Benefits: Versatile designs Various options of termination Also suitable for thicker mounting panels Compatible with all M16 connection cables Data sheet of the M16 panel mount connector with square flange Contact to sales team Online-Request for products

Portfolio of RADOX® anticapillary cable has been extended

Fri, 14 Jul 17 00:00:00 +0200

Our manufacturer HUBER+SUHNER has extended his range of silicone-free RADOX® anticapillary cable with new cross-sections. The anticappillary cable has been created especially for industrial applications.The lenghthways sealed conductors prevent the intrusion of fluids (e.g. water or oil) in the gap between the actual conductor (coppper) and the insulation. This minimizes damage to electronics and sensors.The cross-sections 0.35, 2, 2.5, 4 and 6mm2 have been added to the available silicone-free portfolio. Before the RADOX® anticapillary cable from HUBER+SUHNER was already offered in the cross-sections 0.5, 0.75, 1.0 and 1.5 mm2.Typical Applications: Fan motor cablings Sensor cables Cable harnesses with connection to control units Specifications: Number of insulated conductors: 1 Cross-section: 0.35 to 6 mm2 Voltage rating: 60/600 V DC Temperatur range: -55 to +150°C (3000 h) Min. bending radius: 3x cable Diameter Cables are equipped with electron beam connected RADOX® insulation material Your Key Benefits: Resistant against high and low temperatures Resistant against ozone and weather Impacts Good thermal pressure resistance Insulation is resistant against oils, fuels and hydrolysis Highly abrasion resistant Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation.Data sheet (1 MB)Contact to sales teamOnline-Request for products

Connector series 720 from Binder now VDE certified

Fri, 30 Jun 17 00:00:00 +0200

The connector series 720 from Binder has been VDE certified in June 2017. This standard examines electronic products for applicable safety and health requirements, and once again underlines the quality level of existing binder connectors.VDE certificate as an additional quality indicatorThe certificate is valid for all current catalog items of series 720. The VDE symbol is not placed directly on the product, but is shown on the binder packaging. Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation Approval of the series 720 Contact to sales team

Die Steckverbinderserie IP67 von CONEC wurde erweitert

Tue, 09 May 17 00:00:00 +0200

Unser Hersteller CONEC hat seine IP67 Steckverbinderserie um die USB 3.0-Serie erweitert. Die gesamte IP67 Serie von CONEC, eignet sich für den Einsatz in rauen Umgebungen.Der neue USB 3.0 zeichnet sich im speziellen durch eine bis zu 10-mal höhere Datenübertragungsrate als sein Vorgänger der USB 2.0 aus. Darüber hinaus wurde das erste Mal eine bidirektionale Datenübertragung in einen Universal Serial Bus aufgenommen, das bedeutet, dass der USB 3.0 gleichzeitig in Höchstgeschwindigkeit Daten lesen und schreiben kann.Passend dazu ist der USB 3.0 Typ A auch vollständig steckkompatibel zum USB 2.0 Typ A und kann bis zu sechs Geräte mit bis zu 150 mA (einzeln) betreiben. Ihre Vorteile auf einen Blick:- Datenübertagung bis zu 4,8 Gigabit (Vollduplex)- IP67 Schutzart- Maximal Leistung von bis zu 900 mA- Bajonettverriegelung (schnell und einfach)- Kompatibel mit dem USB 2.0 Mögliche Anwendungsfelder des USB 3.0:- Verkehrstechnik- Gebäudeautomation- Sicherheits- und Überwachungstechnik- Prozessautomatisierung- KommunikationstechnikIhre Ansprechpartner für die Produkte des Herstellers CONEC beantworten Ihnen gerne alle Fragen und erstellen Ihnen ihr persönliches Angebot.Zu den Börsig-AnsprechpartnernOnline-Produktanfrage

UL licensing for vein final shells of Phoenix Contact

Thu, 23 Mar 17 00:00:00 +0100

H2 UL licensing for vein final shellsThe cross section areas the phoenix Conatact vein final shells of 0,5 to 50 mm² are certificated in a lot different implementation now also UL. The UL licensing can occur only in connection with specific Crimptools and devices.The licensing serve the other high-class increase with phoenix Contact and allow a subsequent treatment also in the internaqtional application tot he costumers.Therefore, the packaging etiquettes receive from now on an additional UL logo. The oldcontinuance is sold step by step in the first quarter in 2017 from. The file UL Number is E488001.Your designated sales team will be happy to answer your questions as well as to prepare your personal quotationContact to sales team

New: Series 14 indicator compact

Mon, 13 Feb 17 00:00:00 +0100

The new compact indicator of EAO is ideal in interior and exterior spaces with high humidity and extreme temperature fluctuations.Key Benefits:• Uniform LED-ilumination • PIT connection friendly to assembly • Compact, space-saving design • Lifetime: 50.000 operating hours • 180° all-round visibility • Installation depth 9.5 mm • Protection up to IP69K and IK07 impact resistance • Voltage range between 14 to 32 VAC / DC • Current consumption of less than 50 mAThe robust and compact indicator new indicator of series 14 is ideal for use in machinery and industrial automation.Other typical applications:• Machinery and industrial automation • Robotics • Heavy duty and special vehicles • Rail vehicles • Material handling • Packaging equipmentsThe installation depth of just 9.5 mm, a small outer diameter of 33.5 mm and the polyamid seal allows application in confined spaces with reliable function.The installation of the device is simple by using a fixing nut or a screw thread in the mounting cut-out. Because of Push-in-terminals (PIT) the cable is connected quickly.Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation.Contact to sales teamOnline-Request

Phoenix Contact: Direct connectors for high contact densities

Mon, 02 Jan 17 00:00:00 +0100

The new serie is especially for applications with a high contact density. You can reliably connect 2 to 32 conductors with the SDDC 1,5 double-row direct connector.Easy InstallationFor Mounting you don´t need any tools or an additional header. The SKEDD direct connection technology enables you to connect the connectors directly to the PCB via through-contacted bore holes. The SDDC 1,5 series with a pitch of 3.5 mm is suitable for conductor cross sections from 0.2 mm² to 1.5 mm². Furthermore it is designed for currents up to 8 A and voltages up to 160 V (IEC).Your Key Benefits:- No additional header - No tools - Reduction of total costs - Saving of time - Easy Disassembly Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation. Contact to sales team Online-Request

HARTING Han® Press inserts

Mon, 14 Nov 16 00:00:00 +0100

The new HARTING Han® ES Press contact inserts with tool-free quick connection technology significantly reduce assembly time during wiring. In addition, jumpers offer the possibility of potential multiplication in the connector.The Han® ES Press is the first product in the Han E® product family that enables bridging of individual contacts for potential multiplication. Various longitudinal and transverse bridges are available, which also enable e.g. star and delta circuits for motor control.Different VersionsThe Han® ES Press is available in models 6, 10, 16 and 24 for housing sizes Han® 6 B, 10 B 16 B and 24 B. The contact inserts are compatible with the corresponding inserts in the Han® E, ES and ESS series. The current carrying capacity is 16 A. The cage clamps used are suitable for cross-sections between 0.14 mm² and 2.5 mm² and can be used with both solid and stranded wires (with or without ferrules).Easy InstallationThe Han® ES Press’s cage clamp is delivered open so that the conductor can be inserted directly and without effort. Once the installer presses the actuator into the contact chamber, the cage clamp returns to its starting position, fixing the conductor end so that the conductor is electrically connected to the contact. This connection technique permits faster termination during wiring.Features at a glance: Easy bridging functionality of contacts by means of plug-in jumpers directly on the connector Fast realisation of potential multiplication as well as star and delta bridges Rapid termination technology without tools for a time saving assembly and for optimal process reliability Mating compatible to connectors of the Han E®, Han® ES and Han® ESS product families Integrated opening for measuring probe Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation. Datasheet (0,64 MB) Contact to sales team Online-Request

Good results for Börsig "Distributor of the year 2016"

Tue, 20 Sep 16 00:00:00 +0200

The readers of the journal Elektronik from Germany have voted the "distributor of the year 2016" in the product category electromechanics. In the Elektronik readers survey customers of component distributors assessed their satisfaction with the services of their trading partner.The poll was conducted in the product categories "active components", "passive components", "electromechanics", "optoelectronics/displays", "displays" and "Embedded-Systems".The following criteria were assessed by grades principle:overall impressiondelivery service product samplesdelivery service volumetechnical competence/supportproduct portfolioproduct availability product samplesproduct availability volumePositive resultsIn the category "electromechanics" the distributor Börsig from Neckarsulm (Germany) reached the 2nd place in "technical competence / support" and "overall impression". In the other three criteria Börsig also achieved good results and secured places in the top 10. Uwe Glowalla, Authorized Signatory & Head of Sales, commented result as follows: "We're very pleased with this result. Because of this customer satisfaction, Börsig still continues to invest in divers service features." To the Börsig Linecard More information about Börsig

LED-lights from Binder

Tue, 09 Aug 16 00:00:00 +0200

The Binder LED Lights are characterized by technical innovations and modern design. The LED Lights can be used in rough environments because of their compact constructions. Typical Applications:Operating panelDrafting tabelesMounting in switch cabinetsTargeted lighting Specifications:Termination system: M12 A-codedLight beam length: 250mm, 358mm, 412mmDegree of protection IP 69KLuminosity 277 lm, 380 lm, 596 lmNumber of LEDs per lamp: 60, 96,144Light colour 4.000 K (nw)Voltage 24 V DCTemperature in use – 25° C/ + 60° CDurability till 50.000 hGet your free technical support and detailed offer.Contact to sales teamRequest for products

RADOX® Anti-capillary cable available from Börsig

Tue, 19 Jul 16 00:00:00 +0200

The RADOX® Anti-capillary cable have been specialy developed for industrial applications. The barrier-sealed core prevents the flow of fluids, for example water or oil, between the connectors and the insulation cavities. The result is that potential damage to electronic or sensors will be reduced. Potential applications: Sensor cablesPump cablingHarnesses connected to control unitsDistribution boxesswitchesTechnical data:Number of cores: 1Cross section: 0.35 bis 6mm²Voltage rating < 0.5mm²: 40 V AC / 60 V DC Voltage rating > 0.5mm²: 400 V AC / 600 V DC Temperature range: -40 bis +150 °C (3000 h)Key benefits of RADOX® anticapillary:High and low temperature resistanceOzone and weathering resistanceResistant to pressure at high temperatureFlame retardantHigh abrasion resistanceInsulation is resistant to motor oils, fuels and hydrolysis Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation.Datasheet RADOX® Anti-capillary cable (0,75 MB)Conact to Sales Team Online-Request

M12 Power – compact and powerful

Mon, 20 Jun 16 00:00:00 +0200

With presentation of M12 power connector for power transmission, Hummel reached a new milestone in age of miniaturization. The compact M12 connector from Hummel transmits power up to a nominal voltage of 630 V and a rated current of up to 16 A.By the novel development new areas of applications arise. A prime example is – confined spaces. The M12 power connector makes the use of power plugs possible.Thanks to the use of new materials, the new M12 Power functions reliably up to temperatures of 125 degrees Celsius. The sturdy metal housing complies with EMC standards and accommodates cables with cross sections of up to 11 millimetres. The M12 Power is available in four codings and complies with IP67 and IP69K protection classes.Key benefits of M12 power:- Power transfer to 16 A and 630 V - Temperature resistance to 125° C (257° F) - Cable assembly and shielding is possible in a single operation - Freely field attachable and moulded variants - International certified and proven quality - An optimum protection against twisting during contact insertYour designated sales team will be happy to answer your questions as well as to prepare your personal quotation.Datasheet M12 power Contact to sales team Online- Request

Product announcement from Börsig awarded

Sun, 12 Jun 16 00:00:00 +0200

Börsigs product announcement about TE Connectivitys DEUTSCH DT Series was awarded.The editorial department from „electronic industrie“ and the engineering-magazine „all-electronics.de“ awarded the product announcement Börsig has released in march and april.The announcement covered the prevalent connectors from the DEUTSCH DT Series produced by TE Connectivity. This line of connectors is rated IP67 and especially suitable for wire-to-wire connections in extremely demanding environments.High response through the online-portalThis award recognizes, besides the product of course, the currentness of the monthly product announcements issued by the Börsig GmbH. The crucial reason for the award was the high count of responses on the online-portal achieved by the bulletin. Further also for the awarding editorial department this represents the very first awarded product announcement from the field of electromechanical components.To product News DEUTSCH DT SerieContact to Export sales team

HARTING Han® successively with laser printing

Fri, 13 May 16 00:00:00 +0200

The manufacturer HARTING changes the labeling of his Han® series step by step. Various standard Han® contact inserts, which have been labeled in the pad printing process, are provided in the future with a laser printing. In this context, also marking arrangements will be revised.Also Han® housings are receiving a new laser printing. The labels will be extended to include additional information such as the size of the cable outlet or the NEMA enclosure type.The conversion of the Han® labels takes place in different steps depending on the product line. On the technical product specifications, however, this change of printing has no effect.Fell free to contact our export sales team because of these product changes.Contact to sales team Online-Request

M16 panel mount connectors with wires

Thu, 10 Mar 16 00:00:00 +0100

The manufacturer Binder expanded its M16 connector product range to the male and female panel mount connectors with pre-fabricated single wires.Key benefits of panel mount connectorsTime and cost reductions in processingSingle wires PVC 0,34 mm² AWG 22/7 cUL Style 1007/1569Standard length of single wires is 200 mm, other length on requestConnector styles: standard and front fastenedTechnical specificationsContacts: 4 to 8Rated current: 5 to 7 ARated voltage: 60 to 250 VDegree of protection: IP40, IP67Typical applicationsMechanical engineeringMeasuring technologyMedical technologyYour designated sales team will be happy to answer your questions as well as to prepare your personal quotation.Contact to sales teamOnline-Request

EAO´s Series 45

Mon, 11 Jan 16 00:00:00 +0100

With the Series 45 EAO has once again demonstrated innovative strengths. The novelty will set new standards with design, robustness, functionality and safety. EAO made possible an innovative one-hand-assembly and therefore a considerable time saving. Furthermore EAO´S Series 45 unites an extremely broad range of machine operating functions. For example Keylock switches, Selector switches, Emergency stop switches, Mushroom pushbutton, Potentiometers and many more. Penetration by dust and liquids is prevented even under the most adverse conditions. Therefore EAO´s Series 45 is predestined for use in harsh environments.Your Key Benefits:- Comprehensive and modular series - Rugged in use (up to IP69K) - Easy to assemble and use - Long service life (up to 10m switching cycles) - Penetration by dust and liquids - Suitable for all sectors of industryTypical Applications:- Food and beverages - Packaging systems - CNC machinery - Textile production - Semiconductor and electronics production - Cooling and ventilation equipment Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation. Data catalogue about EAO´s Series 45 as PDF for download Contact to sales team Online-Request

TE Connectivity DEUTSCH DT connectors at Börsig from stock

Tue, 08 Dec 15 00:00:00 +0100

With the DEUTSCH DT Series TE Connectivity offers connectors for harsh environments. The connectors are designed specifically for cable to cable applications. From now on the electronic distributor Börsig offers the established DEUTSCH connectors of the DT Series from stock. Börsig breaks packaging units and delivers the DT connectors extremely fast and without a minimum order value. DT products in stock at Börsig The stocked products are the 2 to 6 positions plug and receptacle housings and the mating contacts and wedgelocks. These connection solutions are complemented by appropriate keying plug and sealing plugs. For the processing of contacts there are corresponding crimp hand tools, a Go/No-Go Gauge, as well as the according extraction tool available.Features of the DT Series The thermoplastic housings of the DT Series offer a wide operating temperature range. Silicone seals provide a waterproof wire termination and connection. The field-proven connectors are reliable and rugged. Thus, the DEUTSCH DT Series is ideal for use in harsh environments. Technical Specifications Operating current: 13 A Temperature range: -55 °C to +125 °C Degree of protection: IP67 Typical Applications Agricultural vehicles Special vehicles Garden equipment Cleaning machines Washer systems Automotive Mining industry Download Press-Release as PDF

DEUTSCH DT connectors from stock

Mon, 07 Dec 15 00:00:00 +0100

With the DEUTSCH DT Series TE Connectivity offers connectors for harsh environments. The connectors are designed specifically for cable to cable applications.From now on the electronic distributor Börsig offers the established DEUTSCH connectors of the DT Series from stock. Börsig breaks packaging units and delivers the DT connectors extremely fast and without a minimum order value. DT products in stock at BörsigThe stocked products are the 2 to 6 positions plug and receptacle housings and the mating contacts and wedgelocks. These connection solutions are complemented by appropriate keying plug and sealing plugs.For the processing of contacts there are corresponding crimp hand tools, a Go/No-Go Gauge, as well as the according extraction tool available.Features of the DT SeriesThe thermoplastic housings of the DT Series offer a wide operating temperature range. Silicone seals provide a waterproof wire termination and connection. The field-proven connectors are reliable and rugged. Thus, the DEUTSCH DT Series is ideal for use in harsh environments.Technical Specifications Operating current: 13 A Temperature range: -55 °C to +125 °C Degree of protection: IP67 Typical Applications Agricultural vehicles Special vehicles Garden equipment Cleaning machines Washer systems Automotive Mining industry Contact to sales teamOnline-Request

The new Han® F+B connector

Thu, 15 Oct 15 00:00:00 +0200

The new Han® F+B connector is an extension of the existing Han-Product family. The connector is the answer to the demanding and stringent hygiene standards in the food and beverages industry. The easy-to-clean housing design was optimized especially for the requirements and conditions in splash zones. It is consistently characterized by large radii and smooth surfaces to meet the EHEDG guidelines. Thus, so-called dirt pockets and the potential bacterial load on the connector have no chance. Furthermore the choice of material for this connector is a PP-type plastic, which resists ECOLAB-certified cleaning agents and has also obtained FDA approval. Moreover Hybrid contact inserts offer the perfect combination for drive solutions and Ethernet network connection. Your Key Benefits: Applicable in food- and beverages industry. Resistant to ECOLAB-certified cleaning agents. Rated IP69K. Obtained FDA 21. Most important features: 25 different contact inserts for data and power. Inserts up to 40 A. Conduction of electrical and optical signals with different termination-options complete the product-portfolio. Configurations with up to 21 signal contacts. Flexible interfaces for data, signals and power. Greater flexibility to plan, modify and clean systems. Minimum dirt adherence thanks to easy-to-clean-design. Your designated sales team will be happy to answer your questions as well as to prepare your personal quotation. Data sheet Han® F+B connector (1 MB)Contact to sales teamOnline-Request

Börsig is distributor of the year 2015

Thu, 27 Aug 15 00:00:00 +0200

The readers of the journal Elektronik from Germany have voted the distributor Börsig to "distributor of the year 2015" in the product category electromechanics.In the Elektronik readers survey customers of component distributors assessed their satisfaction with the services of their trading partner.The poll was conducted in the product categories "active components", "passive components", "electromechanics" and "optoelectronics/displays".The following criteria were assessed by grades principle:overall impressiondelivery servicetechnical competence / supportproduct portfolioproduct availabilityIn the category "electromechanics" the distributor Börsig from Neckarsulm (Germany) reached the 1st place in "overall impression" and "delivery service". In "technical competence / support" Börsig made it on the 2nd place. Thus Börsig landed the best overall placings on the podium. Börsig also got very good grades in the criteria "product portfolio" (grade 1.58; 6th place) and "product availability" (grade 1.55; 5th place). Source: http://www.elektroniknet.de/distribution/sonstiges/artikel/122565/4/, own illustrationThe Börsig GmbH relies on a closed defined product portfolio, which has set its focus on connectors for signal and power transmission. Different sales teams and a field sales force enable personal customer service with high technical expertise. In the central warehouse at the Headquarters Börsig breaks packaging units and realises a wide variety of shipping options and shipping services.Also because of this customer satisfaction, Börsig continues to invest in these services.

HUBER+SUHNER extends his cable portfolio for offshore applications

Thu, 30 Jul 15 00:00:00 +0200

Through its extended RADOX® MFH-S cable portfolio HUBER+SUHNER meets the challenging demands for products both on ships and on oil and gas platforms. Their special product features make them unique on the market. Unlike other products, the HUBER+SUHNER cables can transmit both signals and energy. Furthermore the cables are up to three times thinner und therefore more robust and flexible. They are particulary resistant to mud, diesel, oil, ozone, hydrolysis and the effect of wheater. Cross-sections of up to 6mm² and more than 70 design versions covers enable indoor and outdoor installations in an tougher area of application. Typical Applications: Shipbuilding as well as oil and gas platforms EX Zone 0, 1, 2 and safety zones Energy and signal transmission Fixed and moving installations, for example: control cabinets, ships´ diesel engines, lighting and control systems Specifications: Extremely flexible, thin and lightweight Temperature range from -50°C to +90°C Durability: up to 20.000 hours in temperature of up to 120°C High abrasion and vibration resistance A very small bending radius Flame-retardant and Halogen-free Approvals: DNV (Det Norske Veritas) NEK 606 Germanischer Lloyd (GL) ABS (American Bureau of Shipping), in process Meets fire safety regulations to IEC and EN 45545 Get your free technical support and detailed offer! Data sheet (0,25 MB)Contact to sales team Request for products

T-LOX connection technology from PHOENIX CONTACT

Mon, 20 Jul 15 00:00:00 +0200

High-current feed-through terminal block with new T-LOX connection technology.The new T-LOX connection technology is used to give the TW 50 series panel feed-through terminal blocks a reliable and convenient conductor connection. Here, the terminal block is fastened to the housing using a reversible wedge that can be operated without tools.Your advantages: Reliable conductor contacting thanks to defined contact force Fast and convenient conductor insertion from above User-friendly operating forces for the conductor connection Quick, tool-free fastening in the housing wall Get your free technical support and detailed offer!Contact to sales teamRequest for products

Weller Soldering Iron WXP 80

Mon, 06 Jul 15 00:00:00 +0200

Diverse range of tips and cost savingsThe soldering iron WXP 80 can be used anywhere and can be connected at the WX soldering systems. The tried-and-tested Silver Line heater technology guarantees efficient heat transfer.Best of all: There is a wide range of diverse and also cost-effective soldering tips from the LT tip product line. You benefit from huge costs savings thanks to low operating costs.Other benefits: Parameter memory in the soldering iron - storage of the key data on the iron. No adjustment of the soldering station required. Easy-to-read current status. A ring light at the soldering iron displays the status of the iron at first glance. DatasheetContact to sales teamRequest for products

wire-to-board Headers complement the Power Triple Lock series of TE.

Mon, 11 May 15 00:00:00 +0200

TE Connectivity (TE) introduces new wire-to-board headers as part of the Power Triple Lock connector product line. Thus expanding the familiy of connectors into a growing number of HVAC, automation and control as well as automotive designs. For assembly reliability the optional and unique CPA (Connector Position Assurance) device to help keep the connector fully mated and engaged during shipment, installation and use. Another optional mechanism is the TPA (Terminal Position Assurance) tool which firmly positions the contact into the connector housing. For even easier mounting, the Power Triple Lock connectors feature rounded edges and an anti-snag design.Your Key Benefits: Expand application opportunities from wire-to-wire to wire-to-board Support high-temperature application requirements with flame-retardant material that meet safety requirements Eliminate mis-mating during assembly with keyed and polarized housings Ensure contacts are fully seated while providing an added measure against contact backout with optional (TPA) Ensure mating of cap and plug with audible latch Avoid time loss or risk of damaging locking mechanisms caused by wire snags with ribs designed to protect the latch Safeguard connector´s engagement in high vibration applications with optional (CPA) Support a broad range of design needs with product breadth including free hanging and panel mount receptacles Technical Specifications: Electrical: Voltage rating: 600 VAC or VDC Current rating: Up to 20 A Material: Contact Base Material: Copper Alloy Housing Material: Nylon Standards and Specifications: RoHS compliant, ELV compliant UL 94V-0 Typical Applications: HVAC Refrigerators Washers and dryers Dishwashers Garage door openers Coin changers Audio / video devices Get your free technical support and detailed offer! Datasheet Contact to sales teamRequest for products

TE names Börsig as EMEA Regional Distributor of the Year

Wed, 29 Apr 15 00:00:00 +0200

Presentation of the award „EMEA Regional Distributor of the Year 2014“ (f.l.t.r.): Kevin Rock (TE President Industrial Solutions), Thomas Engler (Börsig Export Manager), Joan Wainwright (TE President Channel & Customer Experience).TE Connectivity (TE), a world leader in connectivity, hosted its annual Global Distribution Summit in March in San Francisco, California, where the company recognized their top performing distribution partners. Börsig was named TE’s 2014 EMEA Regional Distributor of the Year for excellence in sales performance and localized programs.TE officials Joan Wainwright, president, Channel and Customer Experience, and Kevin Rock, president, Industrial Solutions, presented the award to Thomas Engler, Börsig’s export manager, who commented, “With pride we accept the award from TE, which demonstrates that we are doing things right in our market with a global leader.” Börsig, a family-run business, relies on partnerships and lasting relationships for long-term success. Engler added, “Because it is important for Börsig to provide excellent customer care both in and outside of Germany, we consistently strive to understand and address the needs of all of our customers.”Based in Neckarsulm, Germany, Börsig has been selling TE products since 1973. “TE’s strong commitment to distribution and Börsig’s close partnership with TE supports our position as a specialist distributor with a focus on electromechanical connection solutions,” said Stefan Börsig, managing director and proprietor. “TE’s broad product line is significant to our rapidly growing market, and we look forward to continuing to bring TE’s innovative solutions to customers,” added Börsig. TE’s Global Distribution Summit provides TE and their distribution partners with the opportunity to discuss new opportunities and identify initiatives to drive improved collaboration, supporting Börsig’s strategy to develop and grow close relationships with their suppliers.

TE extends his Micro-MaTch Value-line connectors

Thu, 23 Apr 15 00:00:00 +0200

TE Connectivity (TE) introduces his new Micro-MaTch Value-line connectors, including new parts that enhance the well-established Micro-MaTch family of products. The Micro-MaTch Value-line connectors feature a more economical design meeting the needs of industrial, consumer and data communications applications. They are designed around the existing, high quality Micro-MaTch connector system, but have been adapted to suit environments where broad temperature ranges, high durability cycles and vibration resistance are less relevant. On a pitch of 1.27 mm the novelty offers a wide varity of wire-to-board interconnections. Your Key Benefits: Promote value with an affordable and reliable wire-to-board connector system Optimize PCB space with 1.27 mm centerline spacing Enable efficient manufacturing with automatic placement and termination options Help ensure a longer life with highly reliable gas tight and corrosion free connections between wire and insulation displacement contacts Sustain low or high volume manufacturing with a full range of application tooling Support a wide range of applications with cable connectors accepting all standard ribbon cable Technical Specifications: Electrical: Ambient current: 1.4 A / 0.95 A Termination resistance: 20 mV / 100 mA Mechanical: Temperature range: -30°C to +85°C Durability: 8 cycles Engaging force: 6 N / contact Separating force: 0.9 N / contact Resistance to soldering heat: 2 cycles Contact retention: 10 N / contact Dry heat: T = 85°C for 16 hours Cold test: T = -30°C for 2 hours Rapid change of temperatures: -30°C/+85°C ; 15 min/15 min ; 10 cycles mated Material: Housing Material: PBT, 20 % GF, PA 4.6 30 % GF Color: black Contact Material: Copper Alloy Typical Applications: Security equipment Mobile GPS devices Lighting Air & climate control units Audio Video equipment Electronic voting machines Pay terminal Get your free technical support and detailed offer! DatasheetContact to sales teamRequest for products

New: CONEC SnapLock D-SUB Hoods & Connectors

Wed, 08 Apr 15 00:00:00 +0200

The company CONEC expanded its product portfolio for D-SUB hoods by adding different CONEC SnapLock variants. In that regard, the hood comes with a locking system for quick and easy locking. Time-consuming screwing of the hood to the mating connector is no longer required and from there a long lasting connection is made without losable screws.Even poorly visible device interfaces can be locked through the audible and tangible “click” quickly and safely. With an upgrade kit, existing interfaces are also compatible with a CONEC SnapLock hood. The CONEC SnapLock system also allows a hood-to-hood connection.Applications: - Drive technology- Automation technology- Housing and device connection- Communication technology- Mechanical Engineering- Process automation and Process control- Transport technologyMore Product specifications: - Shell size: 1-5- Cable entry: 2 (Size 1-2) ; 3 ( Size 3-5)- Positioning cable entry: straight, side- Hood Material: plastic black or metallized- Shell material (D-SUB): steel tin plated- Number of poles: 9, 15, 25, 37, 50- Cable: 7,5-11 mmYour Key Benefits: - Quick and easy locking/unlocking- Locking kit hood-to-hood- Connector with integrated, non-losable bolts- Kit for back panel mounting and upgrade of existing systems- To be used for: D-SUB, HD-SUB, Combination D-SUB- It is possible to realize wire-to-wire for SUB-DGet your free technical support and detailed offer!More Information about the product on the CONEC HomepageCONEC Snaplock VideoCONEC product catalogueContact to sales teamRequest for products

New thin-wall RADOX® signal cables from HUBER+SUHNER

Thu, 12 Mar 15 00:00:00 +0100

HUBER+SUHNER offers a new generation of the RADOX® EN 50306 300V and RADOX® TENUIS-TW 600V cable families. These thin, lightweight cables for railway do have new electron-beam crosslinked insulation materials with extreme resistance to chemical, electrical and mechanical loads.Because of the rising number of electrical equipment installed in trains, there can be installed between 40 and 80 km of cable per 100 metre length of train. This makes use of space and weight of cabling a critical factor. So there is a high demand for cable that is as thin-walled and lightweight as possible, without reduction in the required fire protection. For the current demands of the railway market HUBER+SUHNER developed these cable solutions, which are also particularly stable under extreme loads. These extremely thin and light products of the cable families RADOX® EN 50306 300V and RADOX® TENUIS-TW 600V are insulated with RADOX® EI 306 electron-beam crosslinked material and RADOX EM 104 sheath material. Thanks to their extreme robustness, these cables perform reliably, guarantee a long life and therefore minimise life-cycle costs. They also meet the strict environmental requirements of EN 50306 and all the fire safety specifications of EN 45545-2, DIN 5510-2, NFF 16-101 and NFPA 130.HUBER+SUHNER is already well-known for its electron-beam crosslinked RADOX® insulation and sheath materials. These are particularly resistant to chemical, electrical and mechanical loads. They do not melt even at extremely high temperatures and remain dimensionally stable even in the case of short circuiting. They also withstand extremely low temperatures.In addition to the extremely robust construction of this new RADOX® generation, these cables offer customers further advantages: customers can, with one single product family, serve countries with different fire protection requirements and a variety of applications. A new core design means that the cables can also be stripped even more easily and rapidly. This saves installation time and therefore cuts costs.Get your free technical support and detailed offer!Contact to sales teamRequest for products

TE extends his Industrial Mini-I/O Connector

Wed, 18 Feb 15 00:00:00 +0100

TE Connectivity (TE) extends its "Industrial Mini I/O" Connector portfolio with a field installable version. TE´s "Industrial Mini I/O" solution is one quarter the size of the conventional RJ45 plug, offering space savings and flexibility for more efficient use of limited PCS Space. Because of the Design with two points of contact, the productivity through a reliable connection is increasing. Your Key Benefits: Available in different versions for multiple applications Ensure reliable connections in industrial and vibration-prone environments Increase design flexibility with space saving solution Obtain a Cat5e connection Save wire termination time with an innovative field installable piercing contact Typical Applications: Industrial Control Motion & Drives Robotics PLC´s IPC Specifications:Mechanical: Operating temperature: -40° C - 85° C Cable diameter: 7.1 mm max Wire size: 24 AWG max Durability: 750 Cycles Cable retention force: 98N (10kg) Electric: 8 position 30V rated Wire-to-board 0.5 A Current ratin 0.635 mm pitch Get your free technical support and detailed offer!Information "mini i/o Connector"Contact to sales teamRequest for products

Expansion of the Series 82 from EAO

Wed, 04 Feb 15 00:00:00 +0100

EAO, the expert partner for Human Machine Interfaces (HMI) expanded his product portfolio of the Series 82 “Vandal-Resistant Pushbutton”. With this expansion there is the possibility to label the Buttons individually. Selected from a catalogue you can choose between many standard symbols or transmit your own symbol or Text to EAO. The laser inscription is resistant through every kind of external influence, for example UV resistance, chemicals or vandalism. With their robust metal housing, theses innovative pushbuttons (conform to IK10 and IP67) are perfect for use in public areas and harsh conditions: Ticket and vending machines Info terminals Access control systems Security systems Further Characteristics: Operating temperature: -30° to +70° Life-time: > 1 mio. switching cycles Approvals: CE, RoHS, UL 16, 19 and 22 mm mounting cut-out Optional LED illumination (red, green, yellow, blue, white) Optional laser marking Get your free technical support and detailed offer!Datasheet “Series 82 / Vandal-Resistant Pushbutton” Contact to sales team Request for products

Binder Sealing Kit for Single Wires for the HEC-Connector – Series 696

Mon, 22 Dec 14 00:00:00 +0100

As an accessory for the panel mount connectors of the 696 HEC series Binder offers a sealing kit consisting of a pressing screw, thrust collar and a sealing for the single wires.This set allows effective protection against humidity also at the cable outlet.The HEC Connector-Series 696 are ideally suited for applications, for example in agricultural engineering in tractors, seeding and harvesting machines. The aim of the manufacturer Binder was to develop a customized connection which can resist the following requirements:UV resistanceInsusceptibility to temperature fluctuationsResistance to acidic rainSaline mistOzoneEtc.Get your free technical support and detailed offer!Binder brochure HEC – Series 696Contact to sales teamRequest for products

Börsig becomes "known consignor“

Thu, 04 Dec 14 00:00:00 +0100

This year Börsig receives a special status as “known consignor” from the Federal Aviation Office. With this status Börsig went a step further to make international trade more secure and faster. The known consignor is shipped with a security initiative of the EU. These are companies, which are classified as particularly reliable and trustworthy and ship products by air regularly. Confirmed by this special status Börsig guaranteed, that the shipping products are checked and packed in a separate area, protected against unauthorized handling and manipulation. Because of this the air freight will have no reapproved security check at the airport. This leads to lesser extremely expensive and time-consuming security checks and lesser delivery delays.

RADOX® high-voltage cable range from HUBER+SUHNER

Thu, 27 Nov 14 00:00:00 +0100

As one of the first suppliers HUBER+SUHNER expand his product range to offer the entire cross-section set. The shielded RADOX® power cables are ideal for high-voltage applications in hybrid and electric vehicles where particularly high currents flow. HUBER+SUHNER offers the following cross-section: 8, 12, 20, 30, 40 and 60 mm².Your Key Benefits: Durable and safe connections Suitable cross-section for every application Provide space, weight and cost savings Most important features: Suitable for automatic processing due a simple insulation High abrasion resistance Excellent high and low temperature resistance Reduced external diameter Ozone and weathering resistance Excellent resistance to petrol, diesel, various oils, engine coolant and windscreen cleaner Resistance against moisture, battery acid and brake fluids Good compressive strength under heat Get your free technical support and detailed offer! Data sheet RADOX® high-voltage cable range (0,9 MB)Contact to sales teamRequest for products

New: "low profile positive lock" receptacles and housings

Mon, 03 Nov 14 00:00:00 +0100

TE Connectivity (TE) introduces 0.110 low profile positive lock FASTON receptacles and housings for gas igniter applications in the appliances market as well as other low profile applications. The positive lock receptacles are specifically designed to allow the receptacle to be centered on the tabs. The lower profile housing allows fit into tight spaces such as gas igniter shrouds, assuring a secure connection compared to traditional positive lock terminals. Key Benefits Allow receptacle to be centered on a shrouded tab with low profile design Reduce mating force and enhance safety and reliability of mated pair with positive lock design Provide high retention with positive lock feature and insertion force 4lbs-6lbs Improve ease of assembly with low profile ergonomic housing design and reduced insertion force Provide a smaller size of stock with thinner design Typical Applications Gas Igniters Harness assemblies Compressors & motors Electro-mechanical switches & timers Temperature sensors Heating elements Vending HVAC (Heating, ventilation and air-conditioning) Get your free technical support and detailed offer! Information "low profile positive lock"Contact to sales teamRequest for products

New Double - row PCB terminal block with high connection density from Phoenix Contact

Thu, 30 Oct 14 00:00:00 +0100

The new PCB terminal blocks in the SPTD 1,5 series from Phoenix Contact – your strong partner in the electrical engineering – enable users to connect conductors with cross sections up to 1.5 mm² with ferrule in an easy and space-saving way on two levels. Thanks to their compact design, the terminal blocks can be easily integrated into the front panel of a device. The Key Applications are in railway and home electronics, although the terminal blocks can resist currents up to 10 A as well as voltages up to 200 V. In addition the arrangement of the solder pins ensures a high level of stability when space is restricted. The terminal blocks have an integrated spring lever with push-in connection and the operating convenience will be increase through an additional test connection as well as marking areas in the front area. Get your free technical support and detailed offer! Product Information Double-row PCB terminal block Contact to sales teamRequest for products

Börsig is founding the Börsig Austria GmbH

Mon, 08 Sep 14 00:00:00 +0200

The distributor of electromechanical components from Germany is founding a corporation in Austria with its headquarters in Vienna to expand the trade with connectors, cables, cable assemblies and other components in the Austrian market.The electronic distributor Börsig is specialized in the sale of connectors from leading manufacturers as well as customized cable assemblies. The personal technical advice by the sales staff and the customer-focused support by the field staff characterizes the value proposition of the specialist distributor. With the Börsig Austria GmbH especially for the Austrian market, Börsig aims to offer this service also nationwide in Austria.A new field manager from Austria is already incorporated into the processes and products of the distributor and is starting with the expansion of the sales activities in Austria. From now on the Börsig customers in Austria can be supported more intensively on the spot. The idea for the next years: With growing orders, the number of employees of the Börsig Austria GmbH in Vienna should be increased.

NEW: Binder Harsh Environment Connector

Mon, 25 Aug 14 00:00:00 +0200

HEC stands for Harsh　Environment　Connector　and designates heavy-duty connectors for harsh environments. Primary applications are agricultural (in　tractors, seeding and harvesting machines, for example). A further important outdoor field is environmental and process engineering - purification and recycling plants are good examples. Building machines and traffic and signalling technology are also typical outdoor applications.The aim of the manufacturer Binder was to develop a customized connection for these applications to meet sector-specific demands, in particular the stringent environmental requirements for UV resistance,　insusceptibility to temperature fluctuations, resistance to acidic rain, saline mist, ozone, etc.User requirements for handling (cold, soiling, gloves) demand an absolutely simple locking mechanism and safe and secure coding. Rugged mechanics, and protection when using steam-jet cleaners must also be ensured. The new HEC connector meets these requirements with the features below and thus provides optimum safety: The lock is designed as 3-point bayonet catch that makes for safe and secure, fast locking,　while a robust coding mechanism prevents any wrong connection. The connection technique uses a crimp design to achieve secure, vibration-proof contact.The contact arrangement for the sales launch is a hybrid 4x signal and 3+PE power configuration with a variety of cable cross-sections.The HEC connectors satisfy the requirements for degrees of protection IP68 and IPX9K in accordance with IEC 60529 and withstand the most stringent application conditions when connected. Protection caps are also available as accessories.Get your free technical support and detailed offer!Binder brochure HEC - Series 696Contact to sales team Request for products

RADOX® from HUBER+SUHNER: New practices

Thu, 14 Aug 14 00:00:00 +0200

RADOX® cables for electric boatsHUBER+SUHNER RADOX® cables and cable systems, traditionaly used in the automotive industry, can also be used in electric boats. LTS Marine produces and delivers electric drivetrains for electric boats and is evaluating automotive cables from HUBER+SUHNER to supply power from the battery to the motor.LTS Marine is also planning to install charging outlets in their system and is looking for standard solutions for that application. Due to the properties of the RADOX® insulation material, the cables are highly resistant to thermal, chemical, electrical and mechanical loads - making them ideal for applications such as the propulsion system for electric boats.RADOX® inter-vehicle jumper systems for trainsAustrian Federal Railways has ordered new state-of-the-art local and regional trains from Siemens. These trains are fitted with RADOX® inter-vehicle jumper systems from HUBER+SUHNER.The robust RADOX® cable systems take into account the specific vehicle geometry and movements of the trains. The inter-vehicle jumper systems also boast an above-average service life. The adjustment of the systems to the vehicle geometry and train movements is crucial in ensuring that the carriage transitions are not placed under excess stress and for achieving the required service life. The materials and construction of RADOX® inter-vehicle jumper systems from HUBER+SUHNER have been designed specifically for use in such situations.For your adequate solution please contact the export sales team.Contact to sales team

Börsig becomes "approved exporter"

Thu, 01 May 14 00:00:00 +0200

As “approved exporter” the electronic distributor is enabled to respond better, more flexible, but most of all faster to requirements of the global markets. With the receipt of the AEO F certificate on April 4, 2014, Börsig has immediately filed the application for the "approved exporter" with the german custom authorities, which was just conceded.Shipments are now electronically registered for the export procedure by our logistics directly here at the company headquarters in Neckarsulm. To date, this process involved the physical presentation of the according goods at the local customs office. The simplified procedure creates formidable flexibility in logistics which allows the electronic distributor of connectors and other electromechanical components to supply his global customers even faster.Moreover, the next improvement already is in the pipeline. Currently all arrangements are being made to receive "known shipper "-status with the german “Luftfahrt-Bundesamt” (Federal department of aviation security). This results in our airfreight being considered and handled as secure cargo without further standard-inspections.

Electronic Distributor Börsig receives AEO F certificate

Fri, 04 Apr 14 00:00:00 +0200

As an "Authorized Economic Operator" the company Börsig is considered to be particularly reliable and trustworthy.The initiation of the " Authorized Economic Operator " (AEO) is a crucial fragment of the EU’s security concept for an effective risk management of customs administrations. After diligent and successful audit the electronic distributor Börsig obtains the AEO F certificate on April 4, 2014. Thus the company is certified having appropriate safety standards for simplified processing in customs handling.Apart from the official character of this certification Börsig utilizes the AEO’s objectives in his operations as quality-distributor of connectors and other electromechanical components on international stage realizing a completely secured supply chain. The AEO certificate simplifies customs clearance, leads to less frequent custom inspections and is also taken into account for other safety-related measures. This means faster customs clearance which leads to more fast and flexible logistics. At the end of the day it’s part of a constant improvement process to optimize the cooperation for Börsig’s international partners.Börsig looks at this title as an indicator for proven reliability and as preparation for future customer requirements. Applying for the "Authorized Economic Operator" was an opportunity for Börsig to review their own processes and the quality management system. "We have screened all the details. As a result we were able to identify opportunities for fundamental improvement which were then implemented right away.", tells Kathrin Schütz who was deeply involved in the project.Being a certified “Authorized Economic Operator - Customs Simplifications/Security" (AEO F) ensures that the complete export related administration and data is comprehensible and reliable, a management-system for commercial and cargo records exists, the solvency and financial independence respectively is given and sufficient safety standards are in place. The safety standards include, for example, various measures for facility security and access control, but also an "employee screening" according to the EU regulation to ensure that no person with economic or legal restrictions – in accordance with all international sanctions lists – is engaged.The Electronic Distributor Börsig will further strive to make international trade more secure and faster. With the receipt of the certificate AEO F Börsig has immediately filed the application for the "approved exporter" with the german custom authorities, which is processed within the next few weeks. Moreover, all arrangements are currently made to receive "known shipper "-status by the german “Luftfahrt-Bundesamt” (Federal department of aviation security) – although there were no complaints at unannounced inspections of the Federal department of aviation security so far.AEO F certificate of Börsig GmbH

EAO Emergency Call Button of the Series 57

Thu, 06 Feb 14 00:00:00 +0100

With a large, illuminated red button featuring a tactile "Call for aid" symbol, passengers will not fail to recognise this in an emergency situation.This innovative, reliable and intuitive product is suitable for on-board lavatories, platform SOS terminals, or any situation where people may need to call for assistance. The unique design features a user-friendly, Ø 74 mm operating surface that incorporates two independently-illuminated feedback rings and fully complies with EN 14752. A wide, raised aluminium bezel helps protects the button against accidental usage and vandalism.The raised "Call for aid" symbol conforms to TSI PRM (Technical Specification for Interoperability for Passenger with Reduced Mobility) and ADA (Americans with Disabilities Act – Accessibility Guidelines for Transportation Vehicles) and will never wear or fade.Offering outstanding durability, the Series 57 Emergency-call button is constructed using contemporary materials and will continue working through extreme temperatures from - 40º to + 85ºC. The front is protected to IP69K against liquid and dirt ingress, and will resist chemical wash-downs often found within these application environments.Get your free technical Support and detailed offer!Datasheet Emergency Call Button of the Series 57Contact to sales teamRequest for products

M12 Panel Mount Connectors

Mon, 27 Jan 14 00:00:00 +0100

Male and female panel mount connectors from Binder have a black insulating body as standard. If multiple panel mount connectors are installed in the customer housing, it‘s difficult to distinguish them visually and it may be possible to mate them incorrectly - in the worst case this may destroy the connector. Therefore it is important to be able to distinguish the different functions visually. Effective immediately, we can supply our A-coded male and female panel mount connectors with single wires in six different colours. The standard wire length is 200 mm, but they can be supplied in any length required by the customer.The diagram uses a new numbering system.If required, B- and D-coded versions with single wires, different housings and dip-solder contacts can be supplied. The lot size will be set initially at a minimum of 50 pieces. Product information coloured Panel Mount ConnectorsContact to sales teamRequest for products

AMP CT and AMP mini CT Connectors from TE

Fri, 10 Jan 14 00:00:00 +0100

Discover new opportunities with AMP CT and AMP mini CT wire-to-board and wire-to-wire interconnect solutions. This connector series is proven to increase efficiency in wire harness making processes. The AMP CT and AMP mini CT product offering provides an economical solution for virtually any application where power or signal needs routed, enabling efficiency improvements, time savings, and printed circuit board space savings.Key Benefits: Save space with high density circuit interconnect Offer design flexibility with IDC and crimp termination methods Provide PC board retention with kinked connector design Enable production flexibility with both through hole and SMT mounting styles Achieve proven performance at competitive prices. Applications: Business equipment Industrial machines Personal computers Printers Audio devices HVAC LED lighting controls Indoor & outdoor lighting LED Illumination Get your free technical support and detailed offer!Informations to downloadContact to sales teamRequest for products

The new EAO Series 82 - Vandal-Resistant Pushbutton

Mon, 09 Dec 13 00:00:00 +0100

EAO, the expert partner for Human Machine Interfaces, offers a range of attractive, vandal-resistant pushbuttons for applications in harsh environments. With their robust metal housings, these innovatively designed switches are protected to IK10 impact resistance and IP67 sealing requirements which makes them ideal for use in exposed public areas as well as other aggressive environments. The switches are available with momentary or maintained action, and with a choice of central dot or ring illumination.Main features Vandal resistance: Impact resistant to IK10, sealed to IP67 standard Long service life: > one million cycles of operation Optional illumination with daylight readable LEDs Metal housing with attractive design Excellent tactile switching action Typical applications Access control, security systems Exposed public areas: Ticketing machines, vending machines, public kiosks Industrial: Machinery and factory equipment Lifting and Moving: Elevators and people movers Mounting cut-out Ø 16 mm, Ø 19 mm, Ø 22 mmMaterials Stainless steel SUS 304 Stainless steel chrome coloured Brass gold coloured Aluminium (natural anodised), other colours on request Get your free technical support and detailed offer!Product information Series 82Contact to sales teamRequest for products

UV-Resistant Sealed CPC from TE Connectivity

Fri, 20 Sep 13 00:00:00 +0200

TE Connectivity’s sealed CPC (Circular Plastic Connectors) is now manufactured with UL F1 rated resin making this product ideal for UV resistance in outdoor applications. This UL F1 rating meets industry standards for long-term UV exposure, making the housings suitable for outside applications where connectors may be subject to frequent or extended exposure to sunlight.With IP 67 and UV resistance you can use these connectors for alternative Energy like Solar, DataComm - Wireless Transmission, Remote Radio Head Wireless Carriers etc.Key Benefits: Withstand temperatures up to 110 °C and eliminate the need for replacements of UV-degraded housings Achieve low cost and easy installation with built-in IP67 sealing capability Reduce equipment space requirements for separate power and signal interconnections with a combined circular configuration Receptacle and plug housings accept Type III+ signal contacts and/or AMP POWERBAND (size 8) contacts supporting a wide range of signal and power applications Achieve design flexibility with three series of housings designed to handle 1) standard signal, 2) power with current up to 50A per contact and 3) a combination of signal and power Support application needs with panel mount, free-hanging and wire-to-board mounting Options Product information UV-Resistant Sealed CPCContact to sales teamRequest for products

TE CoolSplice Connectors for lighting applications

Fri, 28 Jun 13 00:00:00 +0200

TE CoolSplice Connectors are designed to connect pairs of discrete wires or twin cord cables. The insulation displacement, free hanging connectors accept either 18 AWG (0.82mm square) or 20-22 AWG (0.52mm squared - 0.33mm squared) stranded or solid wire in unsealed and sealed, color coded configurations.The CoolSplice Connectors eliminate the need to pre-strip the insulation from the wire conductors and provides a visual controlled termination. The push connect buttons provide a more ergonomic wire termination.Possible applications are outdoor architectural lighting, commercial display cabinets lighting, commercial refrigeration lighting, residential and office furniture lighting or security/alarm systems.Get your free technical support and detailed offer!Product information CoolSplice ConnectorsTechnical drawing CoolSplice ConnectorsContact to sales teamRequest for products

Binder - angled M8 connectors from the 768 series

Thu, 03 Jan 13 00:00:00 +0100

Today wirable M8 connectors with screw termination are confirmed standard equipment when it comes to wiring of sensor/actor - applications. When space is limited an angled version is necessary. This requirement is being met by the new Binder M8 angled connectors with screw termination from the Binder-series 768.The connector, available as 3- and 4-pole version, features a contact insert and an angled cable outlet with locking nut. The angled shell so can be mounted in two positions. The angled connectors with screw termination are available starting today and meet the requirements of IP67 when connected and locked.For detailed informations and your personal offer, please contact our export sales team!Contact to sales teamRequest for products

HARTING har-port: new connectors for ethernet interfaces

Mon, 19 Nov 12 00:00:00 +0100

HARTING expands har-port family with new Ethernet interfaces including patch cables27.09.2012 | HARTING has expanded its har-port family of service interfaces with RJ45 Ethernet versions complete with patch cables already fitted. As a result, users will no longer need a socket, as would be the case with versions incorporating an RJ45 coupler and separate patch cables.The new interfaces are available with cable lengths ranging from 0.2 m to 5 m. They are designed for 1/10 Gbit/s Ethernet, and meet the requirements of transmission category Cat.6/class EA.The har-port product range now covers service interfaces for RJ45 and USB, available as coupler versions or versions with fitted cables. These are complemented by an extensive range of accessories including protective covers and name plates, providing the user with all the conventional interfaces needed for switch cabinets, machines and other applications with easy access from the outside.To the product family of har-port