Tools for Apprentices

On this page you will find various tool, material sets with ferrules, unequipped tool bags and soldering station for various applications.

The tool sets are in corresponding tool bags, starting with small sets up to large tool cases. If tools are already available, we offer a large selection of unequipped tool bags. Thus, each tool finds its proper place and will not get lost. The reliable and high-quality professional soldering station from Weller is ideal not only in apprenticeship but also in professional life.

With this selection, you can provide your apprentices with the best equipment and give them high-quality tools. These special prices are valid until 31.12.2022.

Cutting, stripping and crimping

Article 1202072 Crimpset 6

QUICK WIREFOX 6 - Stripping tool for wires and conductors up to 6 mm²
CRIMPFOX 6T - Crimping pliers with integrated positive lock for wire end ferrules 0,25 … 6 mm², front introduction
500 pcs. each wire-end ferrules - AI 0,25-6 YE; AI 0,34-6 TQ; AI 0,5-8 WH; AI 0,75-8 GY; AI 1-8 RD; AI 1,5-8 BK
300 pcs. wire-end ferrules - AI 2,5-8 BU
200 pcs. wire-end ferrules - AI 4-10 GY
100 pcs. wire-end ferrules - AI 6-12 YE
Assortment box - CRIMPSET 6/25 empty

Special offer 372,28 €

Article 1202580 Crimpset 25

WIREFOX-D 40 - Stripping tool for stripping cables of 4,5 … 40 mm Ø
CRIMPFOX 25R - Crimping pliers for ferrules without insulation 10 … 25 mm², lateral entry
300 pcs. ferrules - AI 10-12 RD
200 pcs. ferrules - AI 16-12 BU
100 pcs. ferrules - AI 25-16 YE
Assortment box - CRIMPSET 6/25, empty

Special offer 404,10 €

Article 3202960 Ferrules

AI SORTI BOX RD - Article 3202960
AI-TWIN SORTI BOX BU - Article 3202986
AI-TWIN SORTI BOX GY - Article 3202999
AI SORTI BOX ANT - Article 3202973
Assortment box, supplied with ferrules according to DIN 46228-4: 1990-09, 50 pcs. of each. AI 0,5-8 WH, AI 2,5-8 BU, 100 pcs. AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK

Special offer 21,99 €

Article 1208856 Tool set, equipped, for cutting, stripping and crimping

CUTFOX 12 - Cable cutter, for copper and aluminum up to 12 mm diameter (up to 35 mm²)
WIREFOX-D 11 - Stripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm
CRIMPFOX-M - Basic pliers, for accommodating dies for a wide range of type of contacts
CRIMPFOX-M RJ45 / DIE - Die, for Crimpfox-M, for unshielded RJ45 connectors, packed in a serial storage box
Tool box, unequipped

Special offer 194,57 €

Article 1213999 Tool set, equiped, for cutting, stripping and crimping

CUTFOX 18 - Cable cutter, angled, for copper and aluminum up to 18 mm diameter (up to 50 mm²)
WIREFOX 10 - Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
CRIMPFOX CENTRUS 6S - Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also for TWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
AI SORTI BOX RD - Assortment box, supplied with ferrules according to DIN 46228-4: 1990-09, 50 pcs. of each. AI 0,5-8 WH, AI 2,5-8 BU, 100 pcs. AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK
Tool box, unequipped

Special offer 297,67 €

Article 1212422 Tool set, equiped, for cutting, stripping, crimping and screwing

CUTFOX 18 - Cable cutter, angled, for copper and aluminum up to 18 mm diameter (up to 50 mm²)
WIREFOX-D 40- Stripping tool, for stripping cables of 4.5 mm ‑ 40 mm‑Ø, insulation thickness of up to 4.5 mm, pivoting blade for round, lengthwise, and spiral cuts
WIREFOX 10 - Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
CRIMPFOX 6S-F - Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.5 mm² ... 6 mm², front entry, square crimp
SZF 1-0,6X3,5 - Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
Tool box, unequipped

Special offer 236,19 €

Tool sets allround

Article 1208843 Tool set allround

CUTFOX 12 - Cable cutter, for copper and aluminum up to 12 mm diameter (up to 35 mm²)
WIREFOX 10 - Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
CRIMPFOX 10 S - PCrimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry
Tool box, unequipped

Special offer 239,92 €

Article 1208953 Tool set allround

WIREFOX 10 - Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
CRIMPFOX 6S-F - Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.5 mm² ... 6 mm², front entry, square crimp
SZF 1-0,6 x 3,5 - Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
Assortment box, supplied with ferrules according to DIN 46228-4: 1990-09, 50 pcs. of each. AI 0,5-8 WH, AI 2,5-8 BU, 100 pcs. AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK
Tool box, unequipped

Special offer 231,48 €

Article 1212505 Tool bag, equipped

CUTFOX 16 VDE - Cable cutter, precision blade with macro-notching, for copper and aluminum up to 50 mm², VDE 1000 V AC/1500 V DC tested
CUTFOX-S VDE -Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested
SZK PH0 - Screwdriver, PH crosshead, VDE insulated, size: PH 0 x 80 mm, 2-component grip, with non-slip grip
SZK PH1 - Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip
SZK PH2 - Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip
SZS 0,4 x 2,5 - Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
SZS 0,5 x 3,0 - Screwdriver, slot-headed, VDE insulated, size: 0.5 x 3.0 x 100 mm, 2-component grip, with non-slip grip
SZS 1,0 x 4,0 - Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
SZS 1,0 x 6,5 - Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
UNIFOX-C VDE - Combination pliers, notched gripping surface, VDE 1000 V AC/1500 V DC tested, size: 180 mm
UNIFOX-P VDE - Needle-nose pliers with blade, notched grip area, VDE 1000 V AC/1500 V DC tested
Voltage tester - for DC and AC voltages from 12 V to 1000 V AC/1000 V DC, IP65
Wrap-up tool bag, unequipped

Special offer 182,68 €

Article 1212506 Toolbag belt, equipped

CUTFOX 18 - Cable cutter, angled, for copper and aluminum up to 18 mm diameter (up to 50 mm²)
CUTFOX-S VDE - Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested
Voltage tester - for DC and AC voltages from 12 V to 1000 V AC/1000 V DC, IP65
SZK PH1 - Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip
SZK PH2 - Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip
SZS 0,5 x 3,0 -Screwdriver, slot-headed, VDE insulated, size: 0.5 x 3.0 x 100 mm, 2-component grip, with non-slip grip
SZS 1,0 x 4,0 - Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
SZS 1,0 x 5,5 - Screwdriver, slot-headed, VDE insulated, size: 1.0 x 5.5 x 125 mm, 2-component grip, with non-slip grip
UNIFOX-CE VDE - Combination pliers, angled design, with opening spring and locking device, cross-notched grip area, integrated M8 - M10 ring wrench, VDE 1000 V AC/1500 V DC tested
USS 4 - Control cabinet key, metal, for all common types of control cabinet
WIREFOX-D 13 - Stripping tool, for stripping installation lines of Ø 8 - 13 mm , e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm², single line stripping 0.2 mm² - 4 mm² , with longitudinal cut blade and sliding knife
Measuring tape - with automatic tape feed and locking mechanism, measuring rail: imperial/metric, length: 5 m
Tool waist bag, unequipped

Special offer 170,99 €

Article 1212503 Tool bag, equipped

CRIMPFOX-M - Basic pliers, for accommodating dies for a wide range of type of contacts
CRIMPFOX-M 10 / DIE - Die, for Crimpfox-M, for ferrules 0.25 - 10 mm², packed in a serial storage box
CUTFOX 18 - Cable cutter, angled, for copper and aluminum up to 18 mm diameter (up to 50 mm²)
CUTFOX-S VDE - Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested
SZK PH0 - Screwdriver, PH crosshead, VDE insulated, size: PH 0 x 80 mm, 2-component grip, with non-slip grip
SZK PH1 - Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip
SZK PH2 - Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip
SZS 0,4X2,5 - Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
SZS 0,5X3,0 - Screwdriver, slot-headed, VDE insulated, size: 0.5 x 3.0 x 100 mm, 2-component grip, with non-slip grip
SZS 1,0X4,0 - Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
SZS 1,0X6,5 - Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
UNIFOX-CE VDE - Combination pliers, angled design, with opening spring and locking device, cross-notched grip area, integrated M8 - M10 ring wrench, VDE 1000 V AC/1500 V DC tested
UNIFOX-P VDE - Needle-nose pliers with blade, notched grip area, VDE 1000 V AC/1500 V DC tested
UNIFOX-WP - Water pump pliers, with groove joint, grip areas with dual notching, acc. to VDE ISO 8976
USS 4 - Control cabinet key, metal, for all common types of control cabinet
WIREFOX 10 VDE - Stripping pliers, for removing the sheath from cables up to 5 mm in diameter, for stripping conductors with a cross section of up to 10 mm², scale for measuring the stripping length; VDE-tested.
WIREFOX-D 13 - Stripping tool, for stripping installation lines of Ø 8 - 13 mm , e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm², single line stripping 0.2 mm² - 4 mm² , with longitudinal cut blade and sliding knife
WIREFOX-D 28 - Stripping tool, for stripping lines of Ø 8 - 28 mm
Voltage tester - for DC and AC voltages from 12 V to 1000 V AC/1000 V DC, IP65
Measuring tape - with automatic tape feed and locking mechanism, measuring rail: imperial/metric, length: 5 m
Tool bag, unequipped

Special offer 390,74 €

Article 1212504 Tool bag, equipped

AI SORTI BOX RD -Assortment box, supplied with ferrules according to DIN 46228-4: 1990-09, 50 pcs. of each. AI 0,5-8 WH, AI 2,5-8 BU, 100 pcs. AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK
CRIMPFOX-M SET - Crimping pliers set, consisting of CRIMPFOX-M (pliers) and dies for insulated cable lugs 0.5 ... 2.5 mm² (1212074), non-insulated conduit lugs 0.5 ... 6 mm² (1212079) and ferrules 0.25 ... 10 mm² (1212080) and 16/25 mm² (1212081).
CUTFOX 25 VDE - Cable cutter, precision blade with macro-notching, for copper and aluminum up to 70 mm², VDE 1000 V AC/ 1500 V DC tested
CUTFOX-S VDE - Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested
SZK PH0 - Screwdriver, PH crosshead, VDE insulated, size: PH 0 x 80 mm, 2-component grip, with non-slip grip
SZK PH1 - Screwdriver, PH crosshead, VDE insulated, size: PH 0 x 80 mm, 2-component grip, with non-slip grip
SZK PH2 - Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip
SZS 0,4 x 2,5 - Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
SZS 0,5 x 3,0 - Screwdriver, slot-headed, VDE insulated, size: 0.5 x 3.0 x 100 mm, 2-component grip, with non-slip grip
SZS 1,0 x 4,0 - Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
SZS 1,0 x 6,5 - Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
UNIFOX-C VDE - Combination pliers, notched gripping surface, VDE 1000 V AC/1500 V DC tested, size: 180 mm
UNIFOX-P VDE - Needle-nose pliers with blade, notched grip area, VDE 1000 V AC/1500 V DC tested
UNIFOX-WP - Water pump pliers, with groove joint, grip areas with dual notching, acc. to VDE ISO 8976
USS 4 - Control cabinet key, metal, for all common types of control cabinet
WIREFOX 10 - Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
WIREFOX-D 40 - Stripping tool, for stripping cables of 4.5 mm ‑ 40 mm‑Ø, insulation thickness of up to 4.5 mm, pivoting blade for round, lengthwise, and spiral cuts
Voltage tester - for DC and AC voltages from 12 V to 1000 V AC/1000 V DC, IP65
Measuring tape - with automatic tape feed and locking mechanism, measuring rail: imperial/metric, length: 5 m
Tool bag - with document and laptop compartments, unequipped

Special offer 569,05 €

Article 1212629 Tool case equipped, lockable, with adjustable strap

CUTFOX 12 - Cable cutter, for copper and aluminum up to 12 mm diameter (up to 35 mm²)
CUTFOX-S VDE - Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested
MICROFOX-SB - Electronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component grip, cutting capacity: soft 0.2 - 2.0 mm; medium hard 1.2 mm; hard 0.5 mm diameter
WIREFOX 10 - Stripping tool, for cables and conductors from 0.02 - 10 mm², self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm² stranded/1.5 mm² solid, replaceable stripping blade
WIREFOX-D 13 - Stripping tool, for stripping installation lines of Ø 8 - 13 mm , e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm², single line stripping 0.2 mm² - 4 mm² , with longitudinal cut blade and sliding knife
WIREFOX-D 28 - Stripping tool, for stripping lines of Ø 8 - 28 mm
WIREFOX-D 11 - Stripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm
CRIMPFOX-M SET - Crimping pliers set, consisting of CRIMPFOX-M (pliers) and dies for insulated cable lugs 0.5 ... 2.5 mm² (1212074), non-insulated conduit lugs 0.5 ... 6 mm² (1212079) and ferrules 0.25 ... 10 mm² (1212080) and 16/25 mm² (1212081).
CRIMPFOX-M RCI 6/DIE - Die, for Crimpfox-M, for insulated cable lugs 0.1 - 0.4 mm² and 4 - 6 mm² (light green, yellow), packed in a serial storage box
UNIFOX-C VDE - Combination pliers, notched gripping surface, VDE 1000 V AC/1500 V DC tested, size: 180 mm
UNIFOX-P VDE - Needle-nose pliers with blade, notched grip area, VDE 1000 V AC/1500 V DC tested
UNIFOX-WP - Water pump pliers, with groove joint, grip areas with dual notching, acc. to VDE ISO 8976
SZS 0,4X2,5 - Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
SZS 0,5X3,0 - Screwdriver, slot-headed, VDE insulated, size: 0.5 x 3.0 x 100 mm, 2-component grip, with non-slip grip
SZS 1,0X4,0 - Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
SZS 1,0X6,5 - Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
SZK PH0 - Screwdriver, PH crosshead, VDE insulated, size: PH 0 x 80 mm, 2-component grip, with non-slip grip
SZK PH1 - Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip
SZK PH2 - Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip
SF-THEX 2,5-100 - T-handle screwdriver, for Allen screws, hexagonal (with chamfer), size: hex 2.5 x 100 mm, ergonomically shaped handle, matt chrome-plated
SF-THEX 3-100 - T-handle screwdriver, for Allen screws, hexagonal (with chamfer), size: hex 3 x 100 mm, ergonomically shaped handle, matt chrome-plated
SF-THEX 4-150 - T-handle screwdriver, for Allen screws, hexagonal (with chamfer), size: hex 4 x 150 mm, ergonomically shaped handle, matt chrome-plated
SF-THEX 5-150 - T-handle screwdriver, for Allen screws, hexagonal (with chamfer), size: hex 5 x 150 mm, ergonomically shaped handle, matt chrome-plated
SF-SOCKET SET 47 - 1/4" socket set, 47-piece, 1/4" reversible ratchet, 48 teeth with fast locking system, 50 mm and 100 mm 1/4" extensions, 1/4" screwdriver handle, 150 mm 1/4" flexible extension, 1/4" Cardan joint, 1/4" T-handle 2 x 1/4" bit adapter, 13 knurled 1/4" sockets, wrench size: 4 / 4.5 / 5 / 5.5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 mm, 21 knurled socket bits: 6 x Torx® T10, T15, T20, T25, T30, T40, 6 x Hex 3, 4, 5, 6, 7, 8 mm, 3 x Phillips recess® PH1, PH2, PH3, 3 x Pozidriv® PZ1, PZ2, PZ3, 3 x slotted 4, 5.5, 7 mm, Allen wrench Hex 1.27, 1.5, 2, 2.5 mm, breakage and impact-resistant plastic case with metal fastening
Voltage tester - for DC and AC voltages from 12 V to 1000 V AC/1000 V DC, IP65
USS 4 - Control cabinet key, metal, for all common types of control cabinet
Assortment box - supplied with ferrules according to DIN 46228-4: 1990-09, 50 pcs. of each. AI 0,5-8 WH, AI 2,5-8 BU, 100 pcs. AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK
Assortment box - supplied with TWIN ferrules according to DIN 46228-4, CSA-certified, box contains 50 pcs. AI-TWIN 2x0,5-8 WH, AI-TWIN 2x0,75-8 GY, AI-TWIN 2x1-8 RD, AI-TWIN 2x1,5-8 BK, 25 pcs. AI-TWIN 2x2,5-10 BU
Measuring tape - with automatic tape feed and locking mechanism, measuring rail: imperial/metric, length: 5 m
Tool case, unequipped, can be locked, with rubber straps to hold tools in place

Special offer 899,10 €

Unequipped tool bags

Article 1212423 Tool bag, unequipped

Length 165 mm
Width 65 mm
Depth 65 mm
Height 315 mm
Color schwarz
Material Polyester
Weight 0,42 kg

Special offer 17,99 €

Article 1212501 Tool wrap bag, unequipped

Length 520 mm
Width 250 mm
Depth 250 mm
Height 290 mm
Material Polyester
Weight 1,82 kg

Special offer 25,19 €

Article 1212502 Tool-beltpouch, unequipped

Length 250 mm
Width 140 mm
Depth 140 mm
Height 315 mm
Material Polyester
Weight 0,5 kg

Special offer 28,79 €

Article 1212499 Tool bag, unequipped

Length 290 mm
Width 185 mm
Depth 185 mm
Height 220 mm
Material Polyester
Weight 0,95 kg

Special offer 39,52 €

Article 1212500 Tool bag, unequipped, with document and laptop compartments

Length 410 mm
Width 225 mm
Depth 225 mm
Height 340 mm
Material Polyester
Weight 1,73 kg

Special offer 89,99 €

Article 1212628 Tool case, unequipped, can be locked, with rubber straps to hold tools in place

Length 510 mm
Width 260 mm
Depth 260 mm
Height 270 mm
Material Polyester
Weight 4,05 kg

Special offer 112,59 €

Actuation Tools

Article 1207608 Actuation Tool ST-BW

Actuation tool, for all 2.5 mm² - 4.0 mm² spring-cages
In addition to its standard application, this screwdriver is also ideal for actuating ST ... and QTC ... modular terminal blocks
Length 160 mm

Special offer 12,65 €

Article 1200135 Actuation Tool ST-BW 0

Actuation tool, for all 1.5 mm² spring cages from PT 1,5/S and FT 1,5/S
In addition to its standard application, this screwdriver is also ideal for actuating terminal blocks from the PT 1,5/S and FT 1,5/S... series
Length 160 mm

Special offer 8,99 €

Soldering Station

Article T0053298699 Weller Soldering station WE 1010

Digital 70 W soldering station. Fast heat-up and recovery time - getting the soldering job done quickly, efficiently and accurately.
The station features a modern design with a power switch on the front.
ESD safe - station and plunger are ESD safe and CE compliant.
Station is switched to standby when not in use.
All settings can be password protected. Thus, predefined settings ensure consistent process quality.
70 W soldering iron with ergonomic handle and easy, tool-free soldering tip change.
Temperature is automatically reset when not in use to save energy and extend tip life.